Reviews
It does not require processing. The lid is a bit ….
The USB power supply can be removed very easily if you don't feel the need to remove the front parts, which are the face of the motorcycle. If you don't feel that removing the front parts and drilling holes in the body is too much work, you can take out the USB power supply very easily.
It is not difficult if you have a set of tools used for maintenance. Drilling was done halfway using a plastic cutter, Nipper, and File.
Wiring is completed by simply joining the existing Connector, which is the quintessential OEMAttachment.
It is also helpful to be able to download the illustrated Instruction Manual.
Material for Waterproof:It has a rubber lid, but the fit is squishy and unreliable, and it hits a nearby screw when closed, so it's not great here.
Aside from the amount of work and quality, I wonder if the most appealing feature of the Large is the ability to take out the USB power supply without any wiring process.
For reference, it took about 2~3 hours to do the work by hand.
View detail
OEMLEDTurn signal
GSX-8S SEA BASSOEMLEDTurn signal
I thought about LED turn signals from other manufacturers, but I chose OEM because it was more reasonable with ICRelay.
Refreshingly more than meets the eye, as you would expect from an OEMOption.
The wiring of the Turn signalBody has been treated with a connector so that it can be installed without damaging the wiring.
Relay is under Tank, so I think it would be better to ask Shop, etc.
Of course, it is ICRelay, so it does not make any operating noise.
View detail
Looks like Refreshing.
Once the cowl is removed, the installation itself is not particularly difficult.
Cap is not quite right.
I think USB-C×2 or something like that would be better anyway.
View detail
Awesome OEM bucket
This is a chromed plastic headlight bucket for the TU250X. It doesn't fit as neatly on the 2011+ models as the black plastic one, although the fit is pretty much 90%. I am unsure if the tabs changed from the 2009 models these were fitted to as standard. You are not getting a whole headlight. Just the bucket. It looks amazing installled, and when paired with the chrome speedo bucket really brightens up the front of the bike. View detail
A Fog Lamp that Appeals to Your Presence
Motorcycle tends to be seen as small from oncoming traffic.
Does it look Small after switching to SV650X?
Left turn of the car or oncoming car that comes out of the side road forcibly.
I feel like I'm getting more
Items to Appeal a little more own presence?
So I decided to put a Fog Lamp on it.
It's also on the Catalogue vehicle.
OEMOption Fog Lamp.
The original design of the SV650X with this attached
Therefore, the shape and position to fit in the vehicle
120% satisfaction with installation
The function is also well-lit.
Motorcycle is also LightOn in the daytime.
If the Fog Lamp is always turned on.
It's pretty obvious.
Effective on mountain roads with many blind corners.
I think it's an item.
Just don't get in the way of oncoming traffic.
I'll have to think about where and when to utilize it.
Finally.
It is an item that has the effect of securing visibility.
It's a pretty expensive product.
If the price is a little more reasonable.
It would have been even better if...
View detail
Fits: SUZUKI Sky Wave 250 Limited, SUZUKI Sky Wave 400 Limited, SUZUKI sky wave 250 type s basic, SUZUKI Sky Wave 400 Type S, SUZUKI Sky Wave 250 Type S, SUZUKI Sky Wave 250 Type M, SUZUKI Sky Wave SS
SKYWAVE250 burgmanTypeMHigh Mount Stop Lamp
It is a good fit because it is an OEM Product.
I think it's also good that Red is less noticeable when Lamp is not attached with Clear Lens.
It is not sold now, but DAYTONA's BSC RevolverTail is also Clear Lens, so
I like it very much and it works very well together.
View detail
Parenthesis is nice and bright, but I'm not sure it's worth the price ?
PIAA's LED Fog Lamp for the SV650X
It's a SEA BASSOEM, so if you follow the Instruction Manual, you'll be able to get the same results as I did I managed to install it in about 2 hours, even for a maintenance novice
The fog lamp is the only thing that makes the SV650X look somewhat simple The feeling is more and more (My personal opinion.)
The light distribution is designed to illuminate the area a bit lower than the low side of the headlight widely It is natural because it is Fog Lamp
So, if you use it together with the low side of the Headlight, you will get a large area of illumination It brightens up
The high side is more effective because it illuminates the front side, where the amount of light is insufficient Outclassing, yes!
Just this Fog LampQuantity:The Set is priced at a good price of less than 50,000 yen, so if you're simply looking for brightness in the front, you can start with the Halogen bulbs You might want to go with an LED headlight
And that one goes up much cheaper than this one
Also, my own purchase had a light scrape on the LampBody …
Do you think SEA BASS and PIAA-kun are inspecting them properly? (Indignation)
I put it on as-is because it's not a practical problem, but I can't get rid of the feeling that it's fuzzy
View detail
headlamp
because of product picture on webside,i thought the cover would be complete, but it is not,so for next time insert a more comprehensible product photo.thank you wery much View detail