DMR-JAPAN Motorcycle Electrical Reviews

Filter

Write a review and get Webike Points!

Reviews

DMR-JAPAN Electrical Clear all

DMR-JAPAN

07 Mar 2024

Multi-reflector

Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard

Japanese Webike user

5/5

When I changed to LED Bulb.

LED Bulb light now illuminates the front of the car. View detail

DMR-JAPAN

06 Mar 2024

Multi-reflector

Japanese Webike user

5/5

Used in xr100 MOTARD

I bought this product because the OEM Product was too dark when I switched to LEDs for the Valve, and the forward illumination is much brighter than the Normal. View detail

Honda Series Waterproof Bullet Covers, 10-Pair Set

DMR-JAPAN

07 Feb 2023

T10 Socket

Fits: その他

Japanese Webike user

5/5

NSR250R (MC21) Position lamps in the

[How is it used?
NSR250R purchased used. (MC21) I purchased this product because there was no position lamp in the headlight of
When purchasing a T10Socket, I compared this product or M&H Mats Stripe, No Brand product made in China.
Bullet Type Terminal eliminates the need for wiring (Required for 6V MONKEY/GORILLA Main Harness side) So, I chose it because it comes in two packs and the rest seemed reliable since it is a Brand that produces a variety of NSRParts.

Was the one you received as per Image?
It was grayer than it looks in the picture. (Naturally, there is no problem in actual use.)
Bullet Type Terminal was also installed without problems.

Was the installation difficult?
Anyone can replace the Valve without tools by simply plugging in the 12V and T10 size Valve and attaching it to the Headlight.
There is no problem with the fit with Valve and Headlight, and it seems to have a moderate resistance and does not seem to shift.
Wiring on the 6V MONKEY/GORILLA Main Harness side has been changed since I purchased the vehicle in my case, so I am not sure about the OEMHarness modification.

How was your experience with it?
Naturally, the light came on without any problems.
Valve is M&H Pine Stripe's WedgeSingle Bulb [Color] Clear (https://www.webike.net/sd/1557693/) I used the
I have just started using it, so I don't know about its longevity and deterioration, but so far I am satisfied with it.

[Included Parts:were they on?
This is the only product as shown in the photo.

[Was there anything that disappointed you?
Not particularly

【Review】
China No-Brand products are of questionable reliability, while those of a good manufacturer are expensive, but this product is positioned right between the two.
In the end, China products are just less expensive, like 4-packs and 5-packs. I don't need that much. I don't need that much." but this product is just right in a 2-pack.
For old cars, it can be used as a position lamp, meter lamp, etc., or for repair in case of emergency. View detail

RC Valve Cable Adjustment Harness "HI with Susumu-Kun"

DMR-JAPAN

12 Sep 2022

Multi-reflector

Japanese Webike user

5/5

It's so good.

The darkness of the unspoken early XRHeadlight. 95 model.
The brightness has been dramatically increased by replacing it with this unit.
New, made in Japan, Multi-reflector, and even a light bulb at this price.
It is the best cosmetic product. Installation can be done by simply replacing the Light Adjustment Angle Screw with the original one.
Seriously, it's the best.
My problems were solved without buying expensive related Parts. View detail

Rc Valve Cable Adjustment Harness "Hi Ni Susumukun

DMR-JAPAN

15 Nov 2021

Multi-reflector

Japanese Webike user

5/5

LED

This is a re-evaluation as I have converted to LED.

The Valve I used is PIAA Headlight Bulb LED 6000K DualBeam 12V 5/6W H6M for Motorcycle. (PH7 equivalent) It is

The XLR80R is an all-AC car, so the Valve I chose is an alternator and supplies.
Simply replace with a Halogen bulb and the job is done.
Since the Multi-reflector Unit has more depth than the OEM Headlight Unit, we were able to install the PIAAValve, which is almost twice as long as the Halogen bulb, without any interference.

Also, because it is a multi-reflector, it does not cause the high-low inversion phenomenon that often occurs when using OEM headlight units with LEDs.

The Clear Lens Multi-reflector is LED, so it is very bright. The spread of light and the height of the light are not a problem, and the safety is increased by introducing LED Bulb. View detail

DMR-JAPAN

24 Oct 2021

Multi-reflector

Japanese Webike user

4/5

become brighter

The OEM Cut lens has thick and dark glass. This product has Multi-reflector and thin plastic lens, so it is much brighter than the Halogen bulb.
If you use LED or HID with Cut lens, the optical axis and high low will be Brown and bitter Brown, so it is necessary to use Multi-reflector.

The point to be concerned about in the installation to XLR80 was glad if it was attached with Seal or Rubber plug of the hole blocking at least because Position is unnecessary. it has a feeling depth than the OEMHeadlight unit, and it is difficult to organize Harness. Sponge tape is necessary to fill the gap with Cowl. The optical axis adjustment screw, spring, and screw receiver plastic need to be used with the OEM product. These are the things that I think.

Although there is a point to be concerned about, it becomes bright visibly only by exchange of the Headlight unit. There are various opinions that the making is cheap, the paint peels off, and the Position unit is loose, and I agree with that point, but when I think that it becomes bright easily, and it becomes a stepping stone to LED conversion, I thought that it was a product of high satisfaction. View detail

DMR-JAPAN

31 Mar 2021

Multi-reflector

Japanese Webike user

4/5

Changed to LED Headlight

I bought this to use as a LED Headlight.

The position lamp can be attached, but I don't use it, so I have blinded it. View detail

DMR-JAPAN

17 Mar 2021

Multi-reflector

XXme

4/5

Very nice

When I ordered related products for xr motard, I found that only one product can be ordered. For its appearance, the transparent part is very crystal clear, but I am also annoyed by it. I hope it will be better if there are more color choices. . View detail

DMR-JAPAN

18 Nov 2019

Multi-reflector

Japan User(translated)

4/5

Definitely brighter

I used to be stunned by the darkness of the flashlight of a long time ago, but this product is definitely brighter The latest LED Headlight Standard However, the latest LED HeadlightStandard EquipmentMotorcycle is not far behind
XR100MOTARD does not have the same connector as the XR100MOTARD, so soldering and processing of the terminals are required It is
Moreover, a Position lamp is attached, but there is no use for it I blocked it with tape
I would have liked to see the Multi-reflector used as an OEM since I drive a moped at night View detail

DMR-JAPAN

19 Mar 2019

Multi-reflector

Japan User(translated)

5/5

The look and brightness of the Headlight has been improved in the Large width

Results of installation
The historical Lens cutType was replaced by the Multi-reflector Motorcycle itself feels rejuvenated
The brightness that was thought to be reduced by Lens cut became the original brightness of Valve
(Valve uses DAYTONA's high efficiency Valve 25W, not the included Blue)
There are some points to be improved as follows, but it is an alternative to OEM parts that can be installed with almost no modification If you think about it, it's what you'd expect

The difference between the product photos on the web and those on the web
In the photo, the HeadlightBody and Bracket have a glossy platting look The paint is a solvent that is used to degrease the paint (for reasons to be explained later) Thin? It's thin?

3. Installation
Because the KAWASAKIBracket interferes a little with the Cowl, a little in Pliers Connected to each other and removed with Gold genus fatigue to deal with it
Because the bracket for adjusting the optical axis interferes with the cowl, it is necessary to bend it slightly
Screw and spring for optical axis adjustment are included in the product Includes Parts:(Screw is thicker than the hole in the cowl but no problem (Screw is thicker than Cowl's hole, but no problem)
Wiring of the headlamp does not match (Male and Female of Bullet Terminal) Female is partly reversed), so if you process it is OK, but use the vehicle OriginalWiring

Position lamp
As mentioned in the other imprints, Material:Rubber's SocketPlug is scuffed and comes off with little force
The rubber plug is a soft material, so if you put on and off the plug several times, it may get cracked And then, the scum comes out
It would have been better if it was a solid and rigid rubber, but it was not reliable The SocketPlug was removed and the hole was covered with Aluminum Tape (Confirmed that the paint can be thinned with solvent by degreasing at this time (Confirmed that the paint is thinned with solvent by degreasing at this time)
Because the headlight is always lighting, if it is a position lamp of this degree, it is unnecessary It is good without original

5．Rubber cover of Headlight Bulb
The material of the rubber may deteriorate quickly, so we have to make sure that we can use it in the vehicle Installations
Installation is not a problem as long as you pull it on firmly

6.Others
The LampLens was scratched, even though it was supposed to be new
I was dissatisfied with the initial quality control (pride and love for the company's products), although I put up with the scratches as they would eventually appear
Because of the scratches, the Material (or surface treatment) of the lens itself is soft Maybe it is View detail

DMR-JAPAN

03 Sep 2017

Multi-reflector

Japan User(translated)

4/5

The effect was Large

I use it with XR 100 MOTARD, but it got brighter than I imagined. You can see clearly that OEM's light distribution is not good.
Installation is easy, but I think that some ingenuity is required. Socket and Waterproof Cover should better use OEM (It is usable normally). Apart from Reflector, it was made quite reasonable.
I think that it is inexpensive against the effect. LEDs and HID will also be brighter. View detail