Reviews
Too short
Made from nice and solid steel, pleasant to the touch. For my purposes and my lamp it turned out to be too short. The headlight was flush with the fork legs. If it were Z-shaped and 5 cm longer, it would be ideal. View detail
Cool Retro Headlight
Works like a charm. Bought this to replace the big stock headlight! Loving the look now after installation and its easy too. View detail
MOTOR ROCK front turn signal bracket
It's been a while since I bought it, so I leave a review. It's simple and looks too satisfying. Motorak is love. The delivery is fast and the quality is good. I like motorak. Thank you. View detail
Motor Lock Tachometer Blind Cap
The price is lower than for others and the quality is high. View detail
looks great on my bike.
It seems very well made, solid as a bell; a real atavistic look backwards to a different time and place. It really does have that "rocket man", Buck Rogers, tail fins and roaring tail pipes sense to it. It will really look good after you get it to the point of being able to install it. The finish on the lamp body is really almost perfect in those areas where it was easy to polish it close to perfection. Under the bottom of the lamp, though, both items I have are VERY rough with mold marks and imperfections that probably weren't easy to get to and, so, were just given a hit and a(n unkept) promise. You really can't use it as is until that area is addressed. Look at the top picture, under the lamp globe and you'll see the mottled look I'm talking about. And this one was almost a killer for me; the bottom plane of the body isn't flat. It's concave as if it was designed to fit on a specific fender or other curved surface (and it probably was). But there's no mention of it, the pictures don't really address that view and I didn't notice it until we were to the point where we were going to start locating bolt holes. We're going to have to have an adapting plate machined to mate our flat fender side to its curved bottom outline. Shoulda looked sooner but, well, I didn't. But the overall look of the item is just what I thought our bike needed and I hope my client can be talked into the extra cost for the adapters because these lamps absolutely MAKE the final look of this bike.Just know up front that there's more work ahead on the finish. View detail
Looks and builds well.
This product is a replacement for a short fender+Lucas lamp made by DAYTONA for SR400, but the R of this product and the fender do not match.
At first, I put it on forcibly as it was, but the Number shook a lot due to vibration, so I bought a Rubber Sheet at Home center and put it between the gap and the License Plate.
After that, I re-drilled the holes in the Fender to reattach it a little closer to the Seat, and replaced the screws that came with the Fender with Firmly screws.
View detail
Good
Cool. Simple. Easy. Mounted with motor rock turn signal. I like it because it fits well without any problems and the electric wires are strong. View detail
Motor Rock 69Bates Headlight
Refreshing as it fits inside Wiringetc.Light View detail
turn signal mount
I was looking for a short turnsignal mount, but couldn't find it anywhere else. The long one made in China was not pretty, but this product seems to be able to work simply without damaging the shape of the bike. Shipping is very fast as it is DHL shipping. It is a satisfactory product. View detail
Is that true of every Manufacturer …
The inside of the Lens was dirty, so when I was wiping it with PartsCleaner, Towel Yellow in color … further polishing made it a Clear Lens Which Manufacturer is it? I could have painted it myself if I'd known … View detail
Fits: HARLEY-DAVIDSON XL1200C SPORTSTER 1200 XL
Not a bad costumer, but visibility is poor
There are many parts that I want to play with, so I bought this one to reduce the cost
If it is the 12.5L Tank of Iron, it is the one that comes forward for the Engine Mount It's not easy to see It was expected, but it's dangerous to see the time and distance while driving! 。
As for the construction, the finish is somewhat handmade, but there is no BALI etc Accuracy is fine It looks massive and sturdy
View detail
Fits: HARLEY-DAVIDSON XL1200C SPORTSTER 1200 XL
A little troublesome
We are tightening together with Bolt of Engine Mount on the Frame side, but in my 2012 XL 1200 N the hole diameter was too small and Bolt did not pass. It is necessary to shave a little by spreading it with a ruther. Also, Bracket uses Color : In case of Unpainted, it will be rusted soon so it will be better to paint.
Visibility is not as bad as I thought. I got lost as made by Easy riders but the movement of the line of sight is few as this is attached to the front. Well it's hard to see from any OEM position anyway.
View detail
Fits: HARLEY-DAVIDSON XL1200C SPORTSTER 1200 XL
Comparison with easyriders products
I replaced it from SIDEMeter mount made by Easy riders. As I made it into Rear Sets, Mount was stuck in the vicinity of the knee with Easy's thing but solved it instead. Offset over 20 cm on the Front side.
Trust Motor rock, even though it is built, is solid. Regrettably this is compared with Easy's Tsujimi paint This is Stainless background + gloss Black Painting. I think that there is liking, but I think that Easy was better in texture.
Removal of the plug on the front side is a little difficult to do afterwards (It is not impossible).
However, Large satisfied that the knee contact which had been worrying for years has disappeared!
View detail
Fits: HARLEY-DAVIDSON XL1200C SPORTSTER 1200 XL 95-09
He would like to finish a Motorcycle narrowly and the Parts here is chosen. of attaching a Blinker shapely by the width in front of a satisfactory and Frame width was able to be carried out. I think that it is an apt Parts to make narrow touch
He would like to finish a Motorcycle narrowly and the Parts here is chosen.
of attaching a Blinker shapely by the width in front of a
satisfactory and Frame width was able to be carried out.
I think that it is an apt Parts to make narrow touch to the
Motorcycle.
At the time of the
automobile inspection, seemingly since honest width is narrow, it is unreasonableness.
View detail
Texture is good at finishing of the Hairline style. upper and lower sides -- although direction of which can also be mounted, since it is located in the place where the light extended far back a little, when attaching at least by a positive, it is
Texture is good at finishing of the Hairline style.
upper and lower sides -- although direction of which can also be mounted, since it is located in the place where the light extended far back a little, when attaching at least by a
positive, it is a check required about the Clearance of a Headlight case and a Stainless shaft.
View detail
I think that they are interesting goods. The headlight was attached by the back from ordinary stay.
I think that they are interesting goods.
The headlight was attached by the back from ordinary stay.
View detail