Reviews
Blinker Relay 12V 2 Pin for LED
Blinker relay went bad, so I bought this one.
I'm thinking of using an LED Blinker in the future, but not LEDs at the moment, but that hasn't been a problem.
View detail
Orange color and different!
I am using the same type of fog in Orange color with the same type of car (Ninja 250SL), but…the light is a little darker. I'm sorry to say that the response is a little sluggish…Orange color is more recommendation! View detail
Yellow color is too strong.
Color is "Color:I was expecting a slightly yellowish color like a light bulb, but when I put it on, it was a bright yellow color.
The product itself is very good.
View detail
It's not just the processing of some of the...
To be honest, it was difficult to install; OEM Valve Cover (1 Set of 2pcs.) The "H" was not able to fit in the bag, so I removed it and used it. The description said that it is waterproof, so I just use it as long as I am careful with water from the front cowl rather than water from the rain.
So far it is working fine.
I think the difficulty in adjusting the optical axis and the fact that the lens is not as bright as the Package can be discounted in terms of price.
I also have a spare Halogen, so at worst I can put it back together....
If you are looking for perfection, please make sure to ask a PRO person for help, and if you are thinking of installing it yourself, you should be prepared for a certain amount of forgiveness. The product cosmetically is good.
View detail
Mini Blinker
It would have been better if the Bracket part was flexible and Rubber type. View detail
LED Tachometer
Overall, it seems to move slowly, but for this price, it's okay. View detail
Used for CBR1000RR SC57
Wiring is Limit.
The installation itself is easy.
I was able to find something similar on the web and install it because there was no instruction manual.
I checked it at night, but it illuminates quite a bit in the foreground, so it may not be suitable for driving?
Fashionability is excellent.
I will put it back tomorrow.
A bit of a shame
View detail
The car passed inspection.
I found this product when I was looking for something inexpensive for vehicle inspections because LED lights are not compatible with vehicle inspections.
It does not correspond to Japanese Vehicle Inspection.
I don't know about durability as I switched back to LED Light immediately after inspection, and I don't know if it will pass inspection on another vehicle, so you are on your own when purchasing.
View detail
Fits: Others Communal to 12V/24V
There is a caveat
First of all, only the cap is waterproof. The cord drawer is not waterproof.
The length of the cord is about 90 cm, and the end of the wire is soldered up, but the terminal etc. must be provided separately.
When the Switch is turned ON, the Red color LED located behind the Small hole in the Center will light up.
If you want to use it all the time, you will probably want to fix it to a handlebar or the like, but a fixed bracket does not allow for fine adjustment of the orientation, etc.
I decided to place it under the Seat because my purpose of using it is to be able to charge my phone while on the move.
Since there is a switch, it is durable even when directly attached to a battery, but if you are concerned, you may need to use Relay from ACCLine, etc.
View detail
Fits: KAWASAKI ZZR250, KAWASAKI ZZR1200, HONDA VTX1800, KAWASAKI ZX-12R, KAWASAKI ZX-11, KAWASAKI ZRX400-2, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1000R, HONDA CB1000SF, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZEPHYR1100, KAWASAKI ZR-7, KAWASAKI Z1000MK2, KAWASAKI Z400GP, KAWASAKI Z1, KAWASAKI W800, KAWASAKI W650, KAWASAKI NINJA250SL
Thoughts.
Since there is no Instruction Manual, I was a little confused. Since I didn't know what the right answer was, I managed to solve the problem in my own way, but even when I put it on, I didn't do any refreshing because I forced it on. 。 Light will be on, so no worries there. View detail
Can use
I replaced the Blinker lens with a Clear Lens and changed the Valve to Orange. It attaches without a problem and blinks, but the rattle after locking the Right turn is Large. The cost performance is the best. View detail
Fits: SUZUKI GSX-R1100 (GU74A), SUZUKI GSX-R1100 (GV73A), HONDA CBR250RR (MC22), HONDA CBR250R (1-light vehicle MC41), HONDA CBR125R (JC50), HONDA CB750 (RC42), HONDA CB650F (RC83), HONDA CB400SS (NC41), HONDA CB400X (NC47), HONDA CB400SF (NC42), HONDA CB400F (NC36), HONDA CB400F (NC47), HONDA CB400SF (NC39), HONDA CB250F (MC43), HONDA CB1300SF (SC54), HONDA CB1300SF (SC40), HONDA CB1000SF (SC30), HONDA 400X (NC47), HONDA CB1000R (SC60), SUZUKI GSX-S1000 (GT79B)
gloomy in the distance
It can be installed on B type 9R without any problem, but it is difficult to install without removing the Upper Cowl because the Spring that holds the Valve interferes with the Heat sink during installation.
My vehicle didn't have it originally, so I'm guessing, but I don't think the Dust Seal will be able to be installed.
Cutline is fine and doesn't seem to dazzle oncoming traffic.
As for the important brightness, there is a feeling that it is a little brighter than Halogen for illuminating near.
However, when I set it to high beam, I can't see the distance well. For some reason, signs, etc. are clearly illuminated, but other situations in the distance are not bright enough.
If you are driving with low beam main, there is no problem, but if you are driving with almost high beam, such as on a mountain road late at night, Halogen is brighter and you can see better.
I don't know if it is the characteristic of LED or the problem of Lens or Reflector, but it is not enough to say that it is certainly brighter than Halogen as mentioned above, so if you are thinking of changing to LED for brightness, you might want to consider other products or HID.
View detail
Not very responsive.
Since it was able to use it without a problem with GROM, I used it for VTR250F.
I did
I changed the Relay first to make the Blinker LED.
In the case of VTR250F, first of all, Connector is necessary, and it is a very narrow place.
Because of the Relay, the workability is very bad and the hurdle is high.
There may be individual differences, but the response is slower and
It was useless.
No effect on VTR250F.
However, I was able to use it without a problem in GROM, so it is also compatible.
There may be.
View detail
Fits: KAWASAKI ELIMINATOR 250V, KAWASAKI W400, KAWASAKI W650, KAWASAKI ESTRELLA, KAWASAKI BALIUS, KAWASAKI BALIUS2, KAWASAKI Estrella., KAWASAKI barios, KAWASAKI Varios 2
Lens only replacement
No inferior to OEM Product. I am satisfied with it. View detail
For people who can deal with initial defects.
I bought this bulb for replacement of YB-1Four, but it doesn't blink in case of YB-1.
Probably it's a compatibility problem of Valve, but it blinked without a problem after exchanging to OEM Blinker's Valve.
To be honest, the quality is on the bad side, which is to say it's worth the price.
Because the cable connection method is twisting the copper wire and attaching it to the socket of the bulb
At a minimum, continuity checks are mandatory. If you're worried about it, it's easy to take it apart and re-solder it.
I don't recommend it to the person who can barely connect the connector by just tightening the screw.
I think this is a product for NAKED.
It is necessary to wrap the Heat Shrink Tube or the like around it at the time of installation so that it does not stand out.
It's a bit of a shame because the texture of the plating from a distance is not so bad for the plastic plating.
The visibility is quite good. The light is scattered in every direction, so if the Blinker is in a position where you can see it from the Rider's perspective, you can see it.
The night is bright and somewhat depressing. Conversely, it means that the existence of a person has been made appeal.
View detail
Fits: KAWASAKI ZZR250, KAWASAKI ZZR1200, HONDA VTX1800, KAWASAKI ZX-12R, KAWASAKI ZX-11, KAWASAKI ZRX400-2, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1000R, HONDA CB1000SF, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZEPHYR1100, KAWASAKI ZR-7, KAWASAKI Z1000MK2, KAWASAKI Z400GP, KAWASAKI Z1, KAWASAKI W800, KAWASAKI W650, KAWASAKI NINJA250SL
With high hopes!
I bought it as a spare so that I don't have to worry about when it goes out because my current $3,000 LED is two years old.
And you can't go wrong with any of the products listed on We-Big! This is why I bought it.
I haven't installed it yet, but I'm hoping for the best!
View detail
Fits: HONDA Super CUB [Super Cub] [Fitting and other information] Deluxe, HONDA Super CUB [Super Cub] [Fitting and other information] Standard, HONDA little cub
Looks zero, X as a feature
[Was there anything that disappointed you?
It may be a problem of Shade and Reflector, or the light is diffused in all directions and the front is as bright as I expected It must not
Do you have any wishes or improvements you would like to make for the Manufacturer?
Shade makes little sense
The front illumination and the fact that you can hardly get the light axis out is fatal to the product and should be reviewed even if the price is raised
[Do you have any products to compare it to?
SP Takekawa Multi-reflector
Frequently Asked Items
What made you decide to buy?
Try Multi Reflector Light because NORMAL feels choppy I wanted to
How was your experience with it?
I feel like I've wasted a lot of money on this product, as the lighting range and optical alignment is very laborious
To say that it's worth the price is an understatement..
Was the installation difficult?
It's relatively easy, but it's hard to get an optical axis due to the low accuracy of the parts
[Others]
Using PIAA's Valve
View detail
Some vehicles require wiring. In six months..
It was attached to the ELIMINATOR 250V, but it needs to be modified depending on the wiring of the car body This body has a single Blinker MonitorLamp, so if you install it as it is, you'll be able to get a Did I leave the lights on? Do both blinkers light up at the same time? Since Emon's rectification Diode in Quantity:Pair (for Left and Right) I crafted a one-way current flow to each wiring I realized this after I connected it, so I rushed to the nearest Color:I bought it from YellowHat and put it on, but the morning before last, even though she was fine until then Relay itself has passed away It was six months old It may have been caused by a flowing blinker and a Diode with more capacity than I needed, so I'll give Relay itself a rating of 3.0 View detail
It was not attached to the Grom JC75
I bought it because there was a Grom in compatible car models, but the installation Screw Pitch does not fit in JC75 It was not possible to install it because it was not possible to install it It is sleeping in the warehouse
Check carefully before you buy a vehicle, even if it is listed as a compatible model …
View detail
It got brighter.
There was no manual, I was a bit tricky to install Valve. If you do not reverse the orientation of the adapter, you can install it properly if you can replace the normal Valve.
Brightness is brighter than Halogen bulb. As for High beam, since only 4 sides are lit from Low beam of 2 side lighting, the optical axis itself does not change. I was sorry about that,
Considering the price thing, it can not be helped. Moreover, I wonder if it is necessary to make full-wave rectification.
View detail