Reviews
![[Mr Quick] Turn Signal Garnish](https://img.webike-cdn.net/catalogue/images/132007/mr19-cc07-01_TS.jpg)
Easily Black Spec.
[How is it used?
Street riding.
Was the one you received as per Image?
It is not so bad, but not so bad.
Was the installation difficult?
Just remove one Screw and insert it.
How was your experience with it?
Blinker's Plating was a bad girl and I was concerned about it, but here it all went away.
[Was there anything that disappointed you?
Roughness of the manufacturing process. BALI removal and file hanging are essential before installation because of the great BALI.
Other items that would be helpful
Availability and clarity of Instruction Manual
No Instruction Manual.
Opinions and requests to Manufacturer
I would like to see you at least take BALI.
View detail
Double Bulb included is a nice touch.
The OEM stop-lamp ran out, so I replaced it with this Smoke Type product as a change of pace. It looks better than it does in the picture. [Color] Smoke feel." The "M" is a little bit smaller than the "L" and does not look bad even if an old man rides on it! View detail
very good
This is a part that can be easily installed. It also shows high satisfaction compared to the price of the parts and the difficulty of the installation work. The painting and quality of the product are perfect.About quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing View detail
We were able to immeChain at a reasonable price!
I am very satisfied with the Plating, which gives it a luxurious feel (in my opinion) and Large. The impression has completely changed.
I read in the comments and the instruction manual that the ETC receiver in the Meter may not be able to receive the signal unless it is relocated, but some other sites said it was Large sturdy, so I installed it without relocating the receiver. In my case, the Gate opened and closed without trouble, so I am relieved.
View detail
Blinker Relay 12V 2 Pin for LED
Blinker relay went bad, so I bought this one.
I'm thinking of using an LED Blinker in the future, but not LEDs at the moment, but that hasn't been a problem.
View detail
Orange color and different!
I am using the same type of fog in Orange color with the same type of car (Ninja 250SL), but…the light is a little darker. I'm sorry to say that the response is a little sluggish…Orange color is more recommendation! View detail
Stable and low-load operation.
The Normal blinker relay was not stable and was replaced with this one. the Normal had a click-chica-chica-chic sound and vibration, but this one has no sound or vibration. Moreover, the blinker bulb seems to be brighter without changing. View detail
Quality!
The plating is of good quality with no floating!
I used it to Repair a Blinker that was mogged when it fell over and I am Large satisfied!
View detail
Yellow color is too strong.
Color is "Color:I was expecting a slightly yellowish color like a light bulb, but when I put it on, it was a bright yellow color.
The product itself is very good.
View detail
Repair
It was defective. The bulb rotates around in the correct position and cannot be fixed, and the Socket is too large. The broken OEM Product was replaced with a Rose Socket. View detail
Cool, FOX2! (SwitchON)
It is not waterproof, and of course, it is a product that requires self-processing. It takes a lot of time and ingenuity.
But! Anyway, Missile switch is a piece of man's romance! Good looking, and the texture of the toggle is also good!
Tick-tock ministry." and the finger-soft texture is irresistible!
It's affordable and it's a Recommendation anyway!
View detail
Fits: SUZUKI GSX-R1100 (GU74A), SUZUKI GSX-R1100 (GV73A), HONDA CBR250RR (MC22), HONDA CBR250R (1-light vehicle MC41), HONDA CBR125R (JC50), HONDA CB750 (RC42), HONDA CB650F (RC83), HONDA CB400SS (NC41), HONDA CB400X (NC47), HONDA CB400SF (NC42), HONDA CB400F (NC36), HONDA CB400F (NC47), HONDA CB400SF (NC39), HONDA CB250F (MC43), HONDA CB1300SF (SC54), HONDA CB1300SF (SC40), HONDA CB1000SF (SC30), HONDA 400X (NC47), HONDA CB1000R (SC60), SUZUKI GSX-S1000 (GT79B)
Finally, it was not available.
I took the time to disassemble the Light area to remove the exterior, but Material:The Rubber Waterproof Cover could not be attached and I gave up on installing it.
It was a waste of time, effort and Gold.
View detail
Replacement from Steel!
Front side is Material:Since I changed to Aluminum, I replaced the Rear side along with it. Aluminum is not rustproof, but it is not red rust, so I think it is good from the maintenance point of view. View detail
Replacement from Steel!
This is a replacement for Steel Plating Specification. Plating has been peeling and rusting over time, so Material:When I was looking for a replacement for the aluminum case, the length was not quite right and I found this product. View detail
Fits: KAWASAKI ZEPHYR400χ, HONDA CB1000SF, HONDA CB1300SF, HONDA CB400SF, HONDA CB400SS, HONDA CB750, HONDA CD50, HONDA CL400, HONDA GB250 CLUBMAN, HONDA JADE, HONDA NS-1, HONDA ST50, HONDA VTR250, HONDA X11, HONDA X4, HONDA APE 100, HONDA APE 50, HONDA GORILLA, HONDA SHADOW400, HONDA CHALY
The foundation.
I bought it thinking it would come with it, but it was only CoverLens.
I wish you had Appealed a little more about it not coming with a foundation.
View detail
Fits: KAWASAKI Z750FX, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1, KAWASAKI Z1000 MkII
be tightened
It tightens up my face and I'm very happy with Black. View detail
A much improved look to my Z900RS. I like a bit of bling.
So pleased with my recent delivery of these chrome effect clock covers. Took 20 minutes to fit as they come without fitting instructions. The delivery time was very fast too. Japan to England in 4 working days. Highly delighted with my purchase. View detail
Fits: KAWASAKI Zephyr 400, KAWASAKI Vulcan 800, KAWASAKI Vulcan 400, KAWASAKI Vulcan 1500, KAWASAKI Zephyr X, KAWASAKI Zephyr 750RS, KAWASAKI Zephyr 750, KAWASAKI Zephyr 1100RS, KAWASAKI Zephyr 1100, KAWASAKI ZRX400II, KAWASAKI VULCAN400 Classic, KAWASAKI Vulcan 800, KAWASAKI Vulcan 400, KAWASAKI Vulcan 1500, KAWASAKI Zephyr X, KAWASAKI Zephyr 750RS, KAWASAKI Zephyr 750, KAWASAKI Zephyr 1100RS, KAWASAKI Zephyr 1100, KAWASAKI ZRX400II
Almost the same design as OEM!
The design is almost the same as OEM, so I am satisfied! View detail
MADMAX Blinker
Purchased for Honda Little Cub. There are questions about the quality of workmanship, short wires. Didn't like the interior design. In the end, I assembled something in between the old kit and the new one. If it is impossible to purchase original turns, you can take it, the price is adequate. -------------------------------------------------- -------- Bought for Honda Little Cub. In terms of manufacturing, there are questions, short wires. I did not like the internal design. In the end, he collected something average from the old set and new. If it is impossible to purchase original turns, you can take, the price is adequate. Powered by Google Translator View detail
It changes the appearance considerably.
The change to plating has changed the look of the product to be reminiscent of ZEPHYR.
It clearly gives a sense of luxury.
However, it seems that Plating may not be able to receive the ETC signal unless the ETC receiver inside the meter is relocated, and the instruction manual says to do so, so I installed the receiver in the bracket of my KaEdia.
View detail