Reviews
Racer is the face of TRAIL
I purchased the Racer to make it a public road Spec.
To secure it in place, it is fastened to the front fork using the included band. The overall texture is good, and the wiring and detailing are sufficient.
If I had to say so, I would have preferred not to put the Poly sports sticker on the Number Plate side. If it is attached separately, I can put it wherever I want.
View detail
Fits: Others
Space under Light is ….
I purchased the Racer to make it a public road Spec.
Quantity of electrical components:I could have bought it as a Set, but I bought this one because I can reconfigure it in various ways.
A License Plate is attached under this plate, but the area seems to be a little narrower. Perhaps it is the difference in shape between the Japanese number and the European number.
The performance of the Light itself is fine and bright enough.
Also, the size is more compact than expected.
View detail
No longer a standard product
The Poly sports headlight has become a staple of Offfor Vehicle headlights.
Similar products are sold at low prices on Amazon, etc., but I have the impression that the difference in price is directly connected to the difference in quality.
In addition to the Rubber Mount that wraps around the Fork, two types of Brackets for adjusting the Headlight position are provided for installation.
View detail
It looks good, but the light leaks.
I have a TT250R, but the light is too dark (like a moped) and the face is a little too much, so I changed to this one which is cheaper and has a headlight.
Installation is as simple as using an Elastic band and tying it to the front fork, but of course the coupler on the Headlight will not fit, so it may be difficult for someone who can tinker a bit.
Headlight Bulb is one of the objectives as it also fits H4 Light Quantity Up】 【Light Quantity Up I personally think that Parenthesis is good with a Small face and the NORMAL look is gone.
Minus point is light leakage.
As you can see in the picture, the headlight leaks quite a bit around the meter. Also, there is no Instruction Manual, so it may take some time for motorcycle beginners to understand.
Well, it is cheap, so overall I am Large satisfied!
View detail
pimping
UFOTwin Headlight Halogen discontinued, Light is too dark, changed to XRMOTARD playback.
LED with Sphere God of thunder Gu2 to match.
Installation is done with a simple push-on installation.
The adjustment range is narrow and it is difficult to adjust the optical axis.
It looks small and parenthesis is nice. I am a little concerned that the OEMMeter is not hidden.
It is much brighter than Twin Headlight, but Off-road motorcycle lights are still dark.
View detail
Can be pimped out in one way or another.
If the Bracket is mounted on the OEMLight, it will interfere with the OEMLight mounting point and be slightly closer to the Right side, so it would be better to drill a hole in the Bracket to dodge this problem. View detail
easy peasy
The MD44 headlight cowl is a personal taste, but many people seem to be dissatisfied with it. This product is great, the light part can be used for the OEM headlight, and if you change to the LED bulbs that are sold in the market, the brightness is excellent and you can use it without any problem. It is also much easier to install than the OEM Headlight. It is also lightweight, and the effect is outstanding for people who go into the mountains. It is also recommended for street riders as it changes the look of the car. View detail
Installed on TT-R125LWE!
We chose this product because of its size, color, and comfortable design. View detail
Installed on TT-R125LWE!
Lightweight type with Tail, Brake, and License Plate Light.
We have selected this product.
View detail
Easy to attach and detach, good product, but may be too robust for TRIALfor Vehicle
[How is it used? For installation of safety parts for TRIAL vehicles (I was expecting TLR200 OEM Product equivalent, although this may not be what was envisioned in the design.)
Was the one you received as per Image? Understanding that Enduro for Vehicle is a robust product when it arrives. (too robust:not Minus).
Was the installation difficult? No problem (Easy and very good as expected, although some ingenuity is required since it is outside OEM use.)
How was your experience with it? No problem (as expected, installation requires some ingenuity, so installation and actual use will be determined in the future).
[Included Parts:were they on? No problem (since it is originally a Single Item).
[Was there anything that disappointed you? too robust (Not Minus)
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
The look was to my liking.
I like the way it looks, but the bulbs are EURO bulbs, so the number of bulbs that can be changed to LEDs is very limited.
In addition, the Headlight terminal is a Hira terminal, so the Wiring and terminal must be provided, and since there is no Cutline, it may not be possible to drive on public roads.
View detail
License with Lights, plenty of brightness!
I was looking for a product of this type with a License Plate Light.
The LEDs are bright enough.
View detail
It is a little small, so you may need to be careful depending on the type of car.
[How is it used?
I found this product when I was looking for a new light cowl because the vehicle light I had received was a battered Other Brand Product.
I purchased this product in the hope that it would moderately mask the Harness and Meter around the Light in the Front section.
Was the one you received as per Image?
It was a little smaller than I had imagined, and I felt that it was not suitable for my purpose of use. It was a little smaller than I had imagined.
How was your experience with it?
When actually installed, the overall size of the light was too small to fully hide the electric wiring that would collect around the light, and the dimensions above the light were too short to expose the Speedometer, resulting in an overall appearance of poor balance.
The design itself is a good parenthesis, so I think it would be a good fit for cars equipped with compact digital meters these days.
[Points to note]
It is difficult to grasp the overall size of the product unless you see the actual product or see a picture of the product installed on a vehicle.
The design seen from the front is intrepid and Parenthesis is good, but it is a flat design, so when you look at it from the side, it looks like... what is it? It is a flat design, so when you look at it from the side, it looks like... what?
How did it compare to other products?
The design is not inferior to other companies' products, it depends on the vehicle and the installer's Sense (my installation of Sense was incompatible with the vehicle in which I installed it).
Other items that would be helpful
Point and hang of installation
Elastic band and material for mounting:Two types of side stays for plastic installation and bolt & lock nuts are included in the package, so you can install them with your sense of parenthesis.
[ITEMS TO BUY TOGETHER
The H4 head lamp bulbs that are initially installed are not very bright. You may want to consider brighter H4 bulbs or LED Lamps.
[Opinions and requests to Manufacturer
I replaced the reflector in the Lens with an LED position bulb, and the progress stopped, but I would like to see better thermal countermeasures.
View detail
In use on KLX230
KLX230 (SE) I bought it in Design, although it is being used for
The functionality of the car is honestly very dark, and I'm not sure if it can be used on public roads, since the street lights are brighter and there is no cutline. ()
As for the feel of the product, it's just cool w
There are three Wiring itself, Black Wiring is Earth?
If you match with the general Wiring color, the high and low will be reversed, so it is better to confirm the intention of the bulb you want to light before assembling in advance.
I lowerQuantity at the time of low:2pc. The Set is lit, the high switch is On, and the top bulb is also lit.
The body is assembled with elastic band on the lower side only, but it is too long and loose for the upright suspension. The inner tube of KLX230 is m37, so I think it is the right size for the inverted suspension. The upper part of the bracket is made by purchasing a bracket at Home center and drilling a hole in the plastic part where the Elastic band is attached and screwing it in place. 。
There is also an interference point where the brake hose hits the side of the hose, so I used a design knife and a nipper to cut the hose diagonally upward to alleviate the interference.
View detail
Purchased because OEM Headlight was broken.
I used it on a 2017 TE250 from HUSQVARNA that I always use for forest roadTouring and OffRoad courses.
Purchased as a replacement after OEM Headlight was broken due to repeated falls.
The design was cool and I immediately decided to buy it.
Installation is very easy and can be done with Included Parts:.
Headlight is not that bright with H4.
Also, there was a screw for adjusting the optical axis.
View detail
Light weight around Light
I purchased this product to save weight and appearance because the OEM headlight surround was cracked.
The installation method has been posted on other sites, so even an amateur could install it without any problems.
As intended, it has reduced the weight, but as a function of the Light, it is better than nothing. The beam coverage is narrow, and we do not recommend driving at night.
View detail
Mounts more securely than expected.
Installed on klx230.
OEMHeadlight is bright and nice, but I'm still disappointed in its appearance…
That is why I purchased this one.
The installation is almost a simple installation.
I was concerned about the brightness, but perhaps because I had originally replaced the bulbs with LED bulbs, I do not have the impression that the bulbs have become that dark.
The top part of the bracket was attached with a rubber bush to the extra hole in the Headlight Bracket on the body side, instead of the Elastic band that comes with the bracket, so the bracket does not move up and down due to vibration.
Handling is also lighter and very recommendation.
View detail
Refresh around Light in D Tracker
Refreshed the Light area of the D Tracker I purchased.
It was originally equipped with ACERBIS Light, so I was able to install it without any problem.
View detail
How durable is it?
It is Elastic band which seems to be weak against ultraviolet rays, but I bought it because I thought that availability is high because it is Rubber.
It is a good choice for retrofitting a road motorcycle with a Bikini Cowl and it is a very nice floating mount. I think it is necessary to change it periodically, but if the weight of the cowl is not so heavy, it is enough to use it.
If you do it well, you won't need to make a complicated bracket, which is why I recommend it.
View detail
Let's not have a fake Yahoo!
[Motivation for purchase]
For public roads
The deciding factor in the purchase
Price and Design
【attachment】
Wrap the Elastic band around the Fork
My Thoughts on Actual Use
I don't know how bright it is as I only use it in the daytime on forest roads
I've thrown it and other things, but it hasn't broken
Areas for improvement
Bolt types are chaiqi
Comparison Products
None
【Review】
More Enduro racer feel!
View detail