Reviews
Fits: Others Vehicles equipped with SP Mukawa's Super multiTFTMeter
Excellent Perfect for hiding earlier damage on the meter of light scratches and swirl marks
About quality and texture - The meter protection film from SP Takegawa is made from soft polyethylene terephthalate with a clear gloss finish and the quality from the overall fit and finish is perfect. About the feeling of use - Perfect for hiding earlier damage on the meter of light scratches and swirl marks. With it's sleek and smooh appearance the meter looks brand new again and will stay that way with the protection of the film. Products to buy together - Other forms of protection for the Grom is what I would recommend while adding the meter protection film. Fuel tank center and side pads are high on the list as these areas are easily damaged from everyday riding. Difficulty of installation - The installation of the meter protection film is a simple task that took 0.5 of an hour to complete. A thorough cleaning of the meter screen followed by application of the protection film is what is required. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the meter protection film is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the meter protection film, I chose EMS for a earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
Oppama pet 2000DXR
Product was excellent and I had my 2 stroke engine back running perfectly as a result. Shipping was fast and the overall shopping experience was brilllant. View detail
GB400TT OEMHorn for Replacement
Used on a 1987 GB400TT.
OEMHorn no longer sounds, but OEM Parts (38110-KN8-004) was discontinued, we searched for a suitable replacement and purchased this product.
GB's OEMHorn has a structure in which a plastic Plating Cover is fitted into the HornBody.
I removed the plastic Plating Cover from the OEM Horn by prying it off with a −driver and transplanted it into this product.
View detail
Fits: YAMAHA RD400, YAMAHA RZ250RR, YAMAHA RZ250R, YAMAHA SRX250, YAMAHA SR400, YAMAHA SR500, YAMAHA RD250, YAMAHA RZ350RR, YAMAHA RZ250, YAMAHA RZ350
From the Regulator, a 40 year old player.
We replaced OEMParts with these Parts.
The size is a little larger than OEM, but no special modifications are required.
View detail
Bright and practical
Compared to NORMAL, it is very bright and easy to see.
We purchased the dark red color, and although the darker color of the lenses might make it difficult to see from behind, this was not the case and the visibility is sufficient.
I am very happy with the color and the tightening effect on the body of the car.
And the Instruction Manual that came with it was quite clear and helpful, which I liked.
It is easy to install and Couplet-on.
This is a product from Recommendation
View detail
Stanley LED Bulb Standard
Used for ADDRESS V100
I used it for a tail lamp, but since the valve of the tail lamp of the ADDRESS V100 also serves as a license plate light, I chose a bulb color for the light emission.
Easy to replace as you just replace the Normal valve.
View detail
Was great to a 12v headlight
I needed to upgrade my headlight so needed this plug for the loom, it fitted really well to the original harness and was easy to fit to the headlight. View detail
Great aftermarket part
My original horn bracket was damaged so this was a great replacement. it fitted and works really well, very handy part to buy if your original one is damaged View detail
Fits: HONDA CUB90, HONDA BENLY50CD50, HONDA MAGNA 50, HONDA JAZZ, HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA APE 100, HONDA APE 50, HONDA GORILLA, HONDA MONKEY, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA Ape 50, HONDA Ape 100, HONDA XR50 Motard, HONDA XR100 Motard, HONDA jazz, HONDA magna fifty, HONDA BENRY CD50, HONDA CUB [Cub].
Looks cool
I needed an extra key as a spare and was super happy that this was an option to upgrade. looks nicer than an oem key and is a good conversational point View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
Looks OEM
This was a great item, my original one was worn out so was happy to find a good option that wasnt expensive. it was easy to install and was great quality View detail
Super loud
I upgraded to 12v and this horn was awesome. it was supper loud and fitted really well, i was super happy with the item and the shipping package ws very safe View detail
DAYTONA PD TypeC
When I use Navigation on my smartphone on a long trip, the battery runs out of charge.
However, with the previous types, it was difficult to charge the battery while using Navigation, but with this type, it is OK.
Charging time is also reduced to Large range.
Satisfied
Note that the plug part will not stick if the plug is too large.
If Cable comes with the phone, no problem.
View detail
KITACO:High flasher measures for Unbreakable lens
I am posting a Review after about 2 years of implementation.
I introduced this as a countermeasure against high flasher when I change the blinker of KLX125 to unbreakable lens.
It is easy to install and works perfectly.
Note that the harness is a bit longer than the OEM Relay, so the waterproof cover on the body side will not fit properly.
However, if each waterproof cover is wrapped with Self Fuser Tape, it is large and durable.
It has been driven about 5,000 km in 2 years, has been caught in large rainstorms while touring, has been igotting in a vomit muddy Enduro race on a rainy day, etc., etc. Water resistance test of a reasonable strength. (?) I have been through the following and to this day have had no problems.
High flasher is illegal and must be addressed.
This product is an easy one-shot solution, and we recommend it!
View detail
For Repair.
It is well made and comes with a Gasket, so it is easy to replace. View detail
Light bulbs are also tasteful, though.
We were impressed with the performance of the SUPER CUB 90, which was converted to a battery reply.
Used for 750 MACH Tail in good shape, Brake lever, Pedal running to check.
Compared to before the replacement, it changed from dim to VIGOR.
Strongly RECOMMENDATION for those who drive old or bulb Spec. vehicles.
It will free us from the worry of sudden bulb failure, and will also increase visibility to following vehicles and improve safety.
It will also reduce the burden on Battery.
View detail
Increased light intensity and reduced power consumption due to LEDs Increased visibility
YAMAHA Used for head lamp on FZX750.
The increase in light intensity due to LEDs is incomparably brighter than Halogen bulbs.
Since the vehicle's electrical system is weak, the reduction in power consumption due to the use of LEDs will be helpful.
It would also improve visibility to others, which would increase safety.
*This is a Repeat purchase due to its effectiveness when installed on a TRX850.
View detail
LED Bulb with just the right standard color that is not an explosive light.
YAMAHA Used for FZX750 Tail lamp.
I think it is best to use LED bulbs for tail lamps because they emit light instantly instead of the gradual lighting of Halogen bulbs.
The effect of reduced power consumption due to the use of LEDs was also helpful.
The luminescence is a standard color, not the so-called explosive light that LED bulbs tend to emit.
*This is a Repeat purchase for use with TRX850.
View detail
Fits: HONDA SUPER CUB 50 Custom, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 Street Specification, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB Custom, HONDA SUPER CUB DELUXE, HONDA PRESS CUB 50 Standard, HONDA PRESS CUB 50 DELUXE
Halogen bulb for Glass Lens
Headlight lens of 25 years old MONKEY is glass, white light of LED is not suitable for it.
It may seem unreliable brightness compared to the current Motorcycle, but it is also Don't be in such a hurry on the road at night." I feel as if I am being told to do so.
There is nothing much to say about the performance of these standard Halogen bulbs, but I am relieved that they are cheap and easy to obtain, as if you can just replace them as soon as they run out.
In this day and age, some manufacturers have stopped producing Halogen bulbs, but I hope that Stanley will continue to produce bulbs of reliable quality and low price, including OEM supply.
I'll buy another pc. for spare!
View detail
Plating is good! Sound is high.
I have been polishing and painting a nearly 50 year old Van Van 75 for the past month or so as a hobby.
When we were finally nearing completion, we realized that the Horn was not sounding. Among several options, we decided on Horn, which has this nice round hole.
Polarity can be either. I also liked the Polished Plating.
View detail
![SPI-H32 Shift Position Indicator Exclusive Kit [for HORNET250]](https://img.webike-cdn.net/catalogue/images/41170/protec001_TS.jpg)
Fits: HONDA Hornet 250
PROTEC SPI-H32 Shift Position Indicator Exclusive Kit [for HORNET250]
Comapre with other indicatores this is the best one with good built qulity.Very eazy to fix with plug and paly as a manual said.Rear wheel taco Signal will get with protec provided extarnal magnet sensor which is located in rear wheel brake drum(you have to run signal cabale from front to rear ).Those 4 magnet will fix fermaly without falling down.CDI taco signal will get from speedo meter wire loom using with Y connector which is supply by protec.Even mai unit inut 12v power suplly Y cable also provided(then eazy to connect) Accuracy with running condition it's really good & it will show up real current gear position while on road.even we can programe up to our rpm ratio. Main indicator bulit with sensor while you are in bright sunlight area brighness of indicator will bright up automatically.Additanally we will get 2nos of protec sticker along with this. I will recomended those who love Bike enthusiast View detail