Reviews
Fits: HONDA APE, HONDA BENLY50, HONDA DAX, HONDA MONKEY, HONDA CT110 HUNTER CUB, HONDA GB250 CLUBMAN, HONDA FTR223, HONDA CL400, HONDA FTR220, YAMAHA SRV250, YAMAHA RENAISSA, YAMAHA BRONCO, YAMAHA TW225, YAMAHA TW200, YAMAHA SR400, YAMAHA SR500, SUZUKI VANVAN, SUZUKI GN125, SUZUKI GS125, SUZUKI VOLTY
Not very good
The paint on some of these has a bumpy texture, like the units weren't clean when the paint was applied. One of them had an electrical short upon installation which was popping my signal fuse. Luckily I had bought a spare. Installaton wasn't a big problem, but I wish they used thicker gauge of wire, it's very thin. Very inexpensive blinkers, but you get what you pay for. I wish I had spent a little more and gotten better quality blinkers. View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB
Durability may be difficult.
The ease of installation was a plus.
The battery stopped charging less than six months after installation.
According to Manufacturer, it was due to age and not covered by warranty.
I hoped it would be a little sturdier and last longer.
View detail
Wiring branch connections are easy and good.
The differences in Cable size and current capacity are easy to recognize depending on the color.
Note that the Cover is divided between the main line side and the branch line side.
*Because the blade directly bites into the sheath for connection, use in locations with a lot of vibration may result in disconnection or poor contact.
*Care should be taken not to reuse the area once used.
It is easier said than done, since the connection can be made with just one pliers....
View detail
I couldn't get it on right.
I was overconfident in myself, I thought I knew as much as Sunday mechanic, but I watched the video to prepare for the installation …Rear brake not working? I had to redo it several times. I have tried several times, but the Rear brake was not working and I gave up. I will try again after reviewing the same motorcycle riders, word of mouth, installation videos, etc. View detail
CT125 was not supported.
I bought it with the naive hope that it would fit ServiceCoupler, but it did not fit at all.
I used only MarkTube, Bullet Terminal and Wiring and discarded Coupler.
View detail
Fits: YAMAHA XSR900, YAMAHA MT-09 SP, YAMAHA MT-09
Size doesn't fit?
I don't know if the size is Large or if the meter is bad, but it keeps floating away, so there are always air bubbles in it. It is better than nothing. View detail
Cut is inaccurate.
I don't need the spray bottle included, etc., so I want it to be cheaper and more accurate. View detail
It was worth the price.
I was a little disappointed because it was an Image that glowed a little brighter.
Well, I can barely see Meter, so I'm going to use it as is for now.
View detail
Fits: KAWASAKI Ninja H2 SX SE, KAWASAKI VERSYS1000 SE, KAWASAKI Ninja[Ninja ] H2 SE, KAWASAKI Ninja[Ninja ] H2 SE+, KAWASAKI Ninja[Ninja ] H2 SX, KAWASAKI Ninja 1000, KAWASAKI Ninja 1000SX, KAWASAKI Ninja 1000, KAWASAKI VERSYS 1000 SE
One key system
[How is it used? 24-hour (e.g. observation, operation (of a machine), care (of patient))
Was the one you received as per Image? Yes
Was the installation difficult? difficult (e.g. customer, guest, child)
How was your experience with it? as expected (as opposed to expected)
[Included Parts:were they on? None
[Was there anything that disappointed you? None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Coupler and Bullet Terminal not included
The Harness, Coupler, and Bullet Terminal shown in the product photo are not included in the package. 4 years ago, I purchased the same product from PMC, but about half of the LEDs were not working. The coupler from Tail lamp is an OEM type, and the length of the harness is not long enough because I installed a long tail cowl. I was going to remove the terminal from the Coupler and replace it with the Coupler, but the size of the terminal is completely different, so I cut off the Harness and attached a solder. If the Harness, Coupler, Bullet Terminal, etc. are not included in the package, I think you should replace the picture of the product. If not, I think you should replace the picture of the product. View detail
Fits: SUZUKI V-Strom 650, SUZUKI V-Strom 1000
Even if Size is past Limit….
The film is hard and fits in the MeterSize Limit. I managed to install the film, but after washing the car, the film started to float when I blew off the water droplets with a compressor.
I stuck it again, but I am not sure about its durability. Is the size still not right?
View detail
It's a shame … when it's on.
I would not have bought it if there was a picture of it with the Lens removed. I would not have bought it if there was a picture of the Lens removed. View detail
PCX125JK05
Front suspension of PCX125JK05 is Quantity:Pair (for Left and Right) The size or rather the shape is different in
So Quantity:Pair (for Left and Right) I don't remember which one, but it doesn't go on straight away, so a lot of ingenuity is required.
It was scratched or the paint peeled off.
Rubber sheets for protection, such as double-sided tape, should also be prepared.
I have no problem with the sturdiness of the product or anything like that.
It would be nice if there was a dedicated Bracket, but there is not.
I wonder if it will be attached if Type is made into 44 pie.
View detail
Fits: SUZUKI Hayabusa
To prevent scratches
Like the Smartphone, I bought this to prevent scratches. I found it as difficult to apply as smoked film on a car. Of course it is effective, but I would like to know how to apply it easily and beautifully. View detail
Air bubbles unavoidable
I bought for 2023 Honda Rebel 1100 - The package comes with 2 set of film of both lens (round odometer and half moon shape engine light), package comes with instruction and the material of the film is good maybe too good of the thickness. (I’ll explain below), I have done film, carbon film wrapped and window tinting myself, this odometer film should be simple and easy as instruction said: 1. Alcohol wipe. 2. Peel half the back sticker and spray with water, 3. Apply to the sticker onto lens and spray water then peel off the back sticker. 4. Use a film squeegee push out the water and air within. Unfortunately, I wasted both set not able to 100% eliminate air bubble, no matter what there is at least 30% air still capture within and if you try too hard you’ll damage the film, I believe the quality of those film it’s too thick couldn’t able to squeeze properl, I even let it sat under the sun for 2 days hopefully it’ll take off the bubble it still remain the same amount… If you not looking for perfection then this might work for you, but I can’t stand the bubble ended peel them all out and threw it in trash. I think for over $15 this should be a nice and easy to use products, is not worth the money. View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
subtle
Perhaps it is because the Scooter has a low power generation rate, but I feel that the Halogen bulb has a wider beam range and better visibility.
This might be better with a slightly better Halogen bulb.
View detail
It is covered with scratches.
Installed to protect the Meter panel.
It is unfortunate that Film is so easily scratched and the line scratches are all over just wiping off the dust.
I would like to see an improvement in the Material to make it less vulnerable.
View detail
Fits: KAWASAKI 650RS, KAWASAKI 650-W1, KAWASAKI 250SS, KAWASAKI 250SS, KAWASAKI 250SS, KAWASAKI 250SS, KAWASAKI 350SS, KAWASAKI 400SS, KAWASAKI 400SS, KAWASAKI 500SS, KAWASAKI 500SS, KAWASAKI 500SS, KAWASAKI 750SS, KAWASAKI 750SS, KAWASAKI KH250, KAWASAKI KH400, KAWASAKI KH500, KAWASAKI Z2, KAWASAKI Z1, KAWASAKI KH250
We can only be thankful that we have Parts….
It functions as a Blinker Bracket.
The shape is completely different from that of the OEMBracket.
That's the fate of Ripro products, we should be thankful that Parts is sold.
We do not recommend this product for the finicky or nervous person.
View detail
Fits: HONDA little cub, HONDA Super Cub 50, HONDA Super Cub STD-92 (12V model), HONDA Super Cub STD-92 (12V model)
Don't expect quality.
I had a headlight unit from another company attached to my LITTLE CUB, but after more than 10 years of use, the plating was peeling, so I replaced it.
The installation itself was not a problem, but the Socket does not seem to be durable.
I installed it at the end of September 2023 and from the beginning of December 2023 the Headlight started flickering occasionally and a few days later the Headlight disappeared while driving and became completely unusable.
I suspected that the Valve was out of ballast and tried to remove it, but for some reason it would not come off. When I pulled it out by forcibly turning it with pliers, I found that the Socket had melted. The melted valve had lost contact with the valve, and the resin was further burnt.
Since the price is reasonable, I think it would be better to use OEM products like Large for Socket and Valve, with Socket and Valve as extras.
View detail
Fits: YAMAHA RD400, YAMAHA RZ250RR, YAMAHA RZ250R, YAMAHA SRX250, YAMAHA SR400, YAMAHA SR500, YAMAHA RD250, YAMAHA RZ350RR, YAMAHA RZ250, YAMAHA RZ350
7-year life span
The last time I purchased this product was 7 years ago and the voltage dropped after about 8000 km of driving.
Replaced.
Battery was replaced with a new one and checked, but no improvement.
Improved after replacing with OEMStock.
Therefore, the Regulator is defective.
Normal voltage was obtained with the re-purchased product.
There may be individual differences, but it is best to consider this level of durability.
View detail