Reviews
Yellow color is too strong.
Color is "Color:I was expecting a slightly yellowish color like a light bulb, but when I put it on, it was a bright yellow color.
The product itself is very good.
View detail
Slightly oversized charging Cable
Used in GSX-R1000R 2016
In other words, it is simply a USB Cable.
The company's Battnao USB Power Cable (15644) The Indicator's LED, cap, and other features are too large to be a simple USB cable.
It is not merely functionally excessive, but as it looks, it is also physically wastefully Large.
However, as you can see if you look for it on Amaz*n, it is actually hard to find a One SideL-Type USB Cable with USB-C terminals at both ends with this length.
Therefore, even if we exclude the fact that the USB cable itself is large, the USB cable itself in this packaging is currently valuable.
Further narrowing the choice of USB Cable is the company's USB power supply with USB-PD support (17213) It is
Not only is the terminal USB-C, but the insertion slot is narrowed, and a USB-CCable with a volume at the terminal cannot be inserted all the way in due to interference with the insertion slot.
I went through several cheap Chinese cables on Amaz*n, but the one with the right length/terminal shape somehow had a large terminal size, so I could not use it because it did not fit in the limit.
However, as expected of the same manufacturer, this product can be used without problems.
So, the company's USB power supply with USB-PD support (17213) If the power supply is routed around the Handlebar in the "Power Supply", this product would be the best solution as a Cable between the power supply and the smartphone.
Although the price is slightly higher, there is also the aforementioned terminal Size, and Amaz*n has a no-go CableQuantity.:Available at Cost to buy 2pc.
The next question is whether the excessive terminal Size is acceptable.
BaddaDirect USB Power Cable (15644) If so, they should have included a clamp to hold the tip. I don't know....
Nevertheless, if this head start and the price are acceptable, I can fully recommend this product.
View detail
Chinese quality
[How is it used?
I installed Fog Lamp on FZS600 and introduced IndicatorSwitch with Fog Mark as a measure against vehicle inspection.
Was the one you received as per Image?
The quality is a bit disappointing. The Fog Mark was mounted on the Body with a slight tilt. I tried to fix it in the correct position by removing the rubber cover of the bellows, but it was fixed so tightly that I could not do it. I tried to remove the rubber cover from the bellows and fix it in the correct position, but it was not possible because it was firmly fixed in place.
Was the installation difficult?
I installed it on a DRC bar mount, but it does not match the bar diameter slightly and there is a gap on the mounting surface, but I managed to install it. I used Screw Loosening Fluid because the gap was not tight enough to fit the bar and the Screw was about to loosen.
How was your experience with it?
I was worried that the blue light of the Indicator might be bothersome to my eyes when it is turned on at night, but it did not bother me much while driving. During the touring, I drove in heavy rain several times, but the waterproof performance was fine.
[Included Parts:were they on?
Includes a complete set of parts needed to turn on the fog.
[Was there anything that disappointed you?
The functionality as a Switch is fine, but the quality is not so good.
Other items that would be helpful
(1) Point of attachment or hang:Depending on the mounting position and angle of the Switch, Blue light may be a concern when driving at night?
2) Availability and clarity of Instruction Manual:I think it is relatively easy to understand because it is illustrated.
(3) Note:Ensure that Wiring is handled without undue force and Connectors are connected.
4) Items to buy together:Screw loosening fluid.
(5) Opinions and requests to Manufacturer:Improve quality and assembly accuracy.
View detail
Fits: HONDA CB1100RS, HONDA CB1100EX
It's hard to say...
The size is also a little small. The CB1100 meter is difficult to position because the part to apply the meter is deep....
View detail
Indicator bulb out of service.
It was used due to a broken bulb in Indicator.
It's working fine
View detail
Replace with new one
The Connector used was old and the claw was broken, so it was replaced with a new one.
Single ItemSince it was sold, it was a great help.
View detail
Power Supply Branch
Used for branching and connecting Power Supply Cable.
Single Item sales were helpful because I could buy only the kind I wanted.
View detail
Branch
Used for branching of Power Supply Cable.
Single ItemThey are sold and the price is not that expensive, so it was very helpful.
View detail
Visibility is ◎ but certainly not water resistant & UV resistant
The quality is good for the price and the visibility is good, so it's not bad.
But it is certainly vulnerable to UV rays and rain lol Cokingetc...I think you should take your own measures!
View detail
SphereLight Sequential Blinker
I'm happy with the Design and Style, which gives it a few more layers of luxury than the others. However, it disconnects! I wish they would think a little more about where the blinker and rubber bushings are. Already on my 3rd Blinker! But there are no more Blinkers out there, so I'm going to put this one on. View detail
Replace with new Connector
The Coupler I was using was discolored and hard to remove, so I purchased a new one to replace it.
Male, MeSpin, and Coupler set items were inexpensive and saved me a lot of money.
View detail
Refreshingly summarized
I purchased this for use with a Switch on a Cycle alarm that gets its power directly from the Battery. The reason why I needed to install the Switch is that I do not use the Alarm when I leave it at home, so I could not accidentally operate the Quantity:We decided to install a switch just in case it is set to run while we are away from home, or to prevent the battery from going up because of it. I don't think it will malfunction if I don't operate it in a strange way, but just in case.
Cycle alarm is intended to be used when leaving the vehicle for touring, shopping, etc., so we plan to install a Switch in the Space under the Seat and use it to turn the Switch on when departing if Cycle alarm use is expected.
Initially, we had installed our own Torg Switch, but it did not fit into the Space under the Seat, so we purchased this Torg Switch to replace it.
I am satisfied that it fits tightly, but I think it is a bit expensive.
View detail
exchange
The Connector we were using was discolored and deteriorated, and was hard to detach and attach, so we replaced it.
It is sold as a Single Item, so I was able to purchase only what I needed.
View detail
Connection
It is used for redoing Wiring.
Just Right Quantity:It was just the right number of pieces to reASSY in a set.
View detail
For UniversalMeter installation
In replacing the Meter with KOSO's Multimeter, we did not want to damage the harness on the body side, so we purchased a 110-type 9-pole and 3-pole Coupler and made an intermediate harness so that the new Meter could be detached with the Coupler.
The product was a perfect fit, the terminals were solid, and the product was safe to use. The coupler is compatible with the coupler attached to the harness on the body side of the car without any problem, and it can be attached and detached smoothly.
I think it was a bit of a waste since I only used One Side, but I will keep the extra one in a Large Cutout until I need it some other time.
View detail
Fits: HONDA CB1100 F (SC11), HONDA CB1100 R (SC05), HONDA CB1100 R (SC08), HONDA CB750 F (RC04), HONDA CB900 F (SC01), HONDA CB900 F (SC09)
rework
I bought this for re-installation because I pulled the Cable when removing the Connector and it fell out.
Single Item sales were helpful because I could choose the number of items to purchase.
View detail
Never do the installation yourself.
It is absolutely impossible to cleanly crimp this without a press-fit tool.
Take advantage of the $4,000 installation service honestly!
I do at least OH above the waist myself.
This time it was an expensive tuition fee that wasted $7,000.
I'll say it again.
It is not possible for an amateur to cleanly comb this with the tools at hand.
Absolutely not.
View detail
Fits: HONDA CB1300, HONDA X4, HONDA VFR800, HONDA RVF750
HONDA Voltage Regulated MOSFET Regulator 50A
I feel that the symptoms of battery upsurge have been resolved so far. View detail
Plating is Beauty, but durability is a problem
[How is it used?
I purchased this bracket to change to a bracket that can be directly attached to the front fork when converting to a front disc.
Was the one you received as per Image?
Plating is more Beauty than expected.
Was the installation difficult?
The fork is sandwiched with rubber to prevent damage to the fork, but the attachment itself is of the sandwiching type, so it can be easily installed without detaching the fork.
How was your experience with it?
I have used it without any defects, but it is easily distorted when force is applied due to interference, etc., so it is not strong enough.
[Included Parts:were they on?
Mounting Screw is included.
[Was there anything that disappointed you?
It is thin Steel, so its strength is weak.
The one made by ▼Posh is made in the same way, so we recommend this less expensive one.
View detail
Fits: HONDA CB1100 F (SC11), HONDA CB1100 R (SC05), HONDA CB1100 R (SC08), HONDA CB750 F (RC04), HONDA CB900 F (SC01), HONDA CB900 F (SC09)
spare
For 110 Type Coupler, it is a repurchase for another Cable to confirm the operation after connecting to the Coupler.
Single Item sales were helpful because I could purchase only the number of items I needed.
View detail