Reviews
Fits: HONDA CREA SCOOPY, HONDA CREA SCOOPYi, HONDA GIORNO CREA, HONDA SMART DIO, HONDA SMART DIODX, HONDA SMART DIOZ4, HONDA DIO, HONDA DIOZ4, HONDA DIO, HONDA LEAD50, HONDA SPACY100, HONDA LEAD 100, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125SS, YAMAHA JOGDELUXE, YAMAHA JOG, HONDA DIOSP, HONDA DIO-ZX, HONDA DIOS, HONDA DIOJ
Easy Pon-mount LEDs
LED bulbs are installed to make them more visible to other vehicles during commuting, especially at night. View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
Easy Pon-mount LEDs
It only takes about 15 minutes to install the LEDs, and it also reduces battery drain. View detail
Fits: YAMAHA MT-07
Exclusive products are nice!
I purchased the Motorcycle right after I took delivery of it and put it on.
I was able to install it before the small scratches started, so I bought it later.
I felt it was a good product to have!
View detail
Fit to Off car without Tachometer
I purchased this unit because I wanted to know the Engine RPM when I converted my WR to MOTARD. The installation required the connection to the Accessories power supply that supplies power when the key is turned on, the Pulse wire of the Engine before it enters the ECU, and the connection to the ECU. (I think it was the Orange line.) I wanted to add ETC at the same time, so I installed OEMY's Gear's Harness kit and got ACC from there. Harness and connectors are located in the space in front of the ECU under the seat. The meter is not bad, although the indicator is not so easy to see. The RPMs are now visible and I feel more secure in turning it all the way up. View detail
A good value at this price.
I bought it for the xs650 bobber project. I liked the retro style. The bobber style makes my bike look great. It works fine, no problems. I used a different bracket that I thought fit better. Be sure to look closely at the image to determine if the included support will work for you. The shell is chrome plated metal.The chrome plating is really high quality, easy installation,I know what all of the wires do because I have a wiring schematic and the plugs are identical in configuration to accept the H4 bulb. I thought about replacing it with an LED bulb, but it doesn't quite fit the bobber philosophy. It's not like cheap Chinese goods, it's really high quality, I definitely recommend it. View detail
Standard Items indeed!
[How is it used?
I used it on my Yamaha MT-25, which I use on a daily basis.
I chose this product that can charge more than two units because I have Situation to charge my phone and Income at the same time.
Was the one you received as per Image?
Fixed Parts and Extension Cord in addition to Body in Quantity:Set
How was your experience with it?
As for the installation, it can be replaced immediately if only the Accessories power supply can be removed.
In the case of MT-25, you only need to remove the Seat, part of the Side cover, and Meter and Wiring and you are done.
Since the Fuse is located just where it is hidden by the Side cover, we fixed it without any special treatment.
When wiring, only the Plus side is too short, so we made a wiring for extension, and when we work on it, we can use it. "Hey, hey, hey, DAYTONA-san, why is only Plus so short!" I am sorry for doubting you, DAYTONA.
Then, fix the Socket to the Multi Bar and you are done.
It is now possible to charge the battery safely and conveniently and quickly.
[Points to note]
The only thing that bothered me was the waterproof cap, which is removed by pulling it out, but the stopper is too small.
I thought it was a Point in need of improvement, as it will probably crack sooner or later.
How did it compare to other products?
We considered various Chinese USB power supply and Others.
In the end, I was right to choose DaytonaBrand's product, which has two mouths and is a standard item.
【Review】
SUB charging is now possible with easy installation.
It takes up only the smallest amount of space, so there is no clutter around the Stem.
View detail
It is good to be normal.
I had to replace the one I had been using because the plastic part of the USBOutlet cracked.
I expect quality from DAYTONA products.
View detail
Replaced due to bulb failure.
Replaced due to bulb failure, Quantity:1 Set of 2pcs.:Pair (for Left and Right) We replaced them at the same time, and the one that has not been cut is kept in the body as a spare. Since they are consumable parts, well, they are not particularly good or bad. View detail
Quite a back view Refreshing
I installed this on my Ninja 400 2018. I really didn't like the back view and wanted to make it Refreshing.
It was made to look quite Refreshing and the visibility of the Blinker was fine. The Installation Instruction Manual was easy to understand.
I had a fair amount of trouble installing it. However, there is quite a lot of information about it on blogs, so I don't think I made a mistake.
First, the screws on the Blinker Bracket were too tight when removing the OEM.
I know it's a Kawasaki thing, but before you start lambasting Screw, here's the Shop. (Note that it was equally hard on ZrX1200DAEG, so be careful if you have common or similar Parts)
If you want to use Bullet Terminal for the connection after installation, you don't have to do any modification. In my case, the OEM was the connector, so I cut off the Bullet Terminal and installed a separately sold connector with Electric Works Pliers.
View detail
It is a good item
[How is it used? It's been a month since I installed it on the Meter panel of my NINJAH2SXSE (2021 model).
Was the one you received as per Image? The size is perfect for the Meter screen. I was worried about damage to the screen since the Meter is an LCD panel, but I am now feeling more secure.
Was the installation difficult? It's easy. It is the same way as the film on a cell phone screen. A small amount of detergent was enclosed in the bottle to wet the adhesive surface during installation. I did not see any Instruction Manual. I diluted it and used it. I sprayed it on the adhesive surface and pushed out the water with the included spatula, which I rubbed lightly to avoid scratching the surface of the film. Moisture was absorbed with Tissue.
How was your experience with it? I have been using it for a month now and I have no problems. There are a few small bubbles left, but no problem in use.
[Accessories] A bottle containing a small amount of detergent and a spatula are included.
[Was there anything that disappointed you? Nothing in particular. It is just a Film, so the cosmetics are rather expensive (2 stars). The shape is perfect and even an amateur could apply it well, so I am satisfied (4 stars overall).
View detail
Easy installation
This is a HONDAOEMOption that adds a gorgeous texture to the Indicator Lamp area of the Meter.
Installation is easy
Simply degrease and clean the mounting surface, peel off the backing paper of the Body's Double-sided Tape, and affix it.
Hairline-style finishes and understated Logo bring Accent to the view from the Owner.
I feel no discomfort and wish it had been included from the beginning.
View detail
Double-sided tape is weak.
I bought it because I wanted to change the cheap look of the transparent plastic cover of the ZrX1200 DAEG Meter, which I had been interested in for a long time.
The double-sided tape was not very adhesive and peeled right off, so I cut a piece of Ultra Strong Double-Sided Tape for Emon's exterior parts in the size of 5mm?20mm and reattached it. Ultra Strong Double-Sided Tape for Emon's exterior parts, 5mm?20mm in size, and re-cut and reapplied.
I chose G Silver and was personally satisfied with the AluminumMount Meter-like look.
Also, there were a few minor issues, such as a gap in the position of the blinker indicator hole and a slight gouge in the hole for the high beam indicator. This is unfortunate because these are not cheap parts.
View detail
Fits: HONDA Ape 100, HONDA Ape 50, HONDA Compatible with normal top bridge and aluminum top bridge made by KITACO
Speedometer, which is difficult to read, is now easier to see.
The OEM Meter location is hard to see and the Main key is difficult to find because of the digital tacho attached.
It was difficult to operate, so I changed it while replacing the LightAssy,
Fixing Meter is Material:Since it is only a Rubber Pipe, there is a slight concern about deterioration.
Style-wise, it's generally as I expected, but the key cylinder is a bit exposed.
I'm curious to see if something can be done about it.
View detail
Fits: Others
Visibility Up
Since it is a scooter, the flickering during idling, which is not stable, is unavoidable, but it is brighter and more visible than the OEM. View detail
bright
If it was so bright, I wondered why I hadn't put it on sooner.
The brightness is perfect, but I had to buy a Crimp Tool for the Bullet Terminal, and the Crimp did not work well, and I am a novice at installation.
It would be even better if Wiring would sell it complete, even if it costs a little more.
View detail
Reads backwards for USA JA65 bikes
This product is fairly easy to install by following the online instructions. Period.BUUUT for the USA JA 65 trails, it will read backwards because our bikes are geared opposite from the rest of the world. It will read neutral 4321 instead of neutral, 1234. In the end after some head scratching, I figured out that I needed to cut the wires going to the magnetic sensor harness That's already installed on the bike and splice the wires by doing trial and error until it read correctly. After that it works perfectly. It will not have an indicator to shift up and they do mention that in the instructions. The harness to the magnet on the trail is very short, so if you're going to cut and splice, I would recommend you get some heat, shrink, connectors, or consider getting an aftermarket sensor that has longer wire. Luckily, I had one of these lying around. View detail
For Dress-up
It is quite bright. Installation requires removal of the tail cowl, but it is not that difficult, so the difficulty level is not high.
The shape is the same as OEM, so Clearanceetc. had no problem.
View detail
Fits: YAMAHA , KAWASAKI , YAMAHA MT-07
Used in LED Blinker replacement
To be honest, any similar product would be fine, but since we replaced it with D-Light ONE by DAYTONA, we matched it with D-Light ONE made by DAYTONA just in case. View detail
OEMLEDTurn signal
GSX-8S SEA BASSOEMLEDTurn signal
I thought about LED turn signals from other manufacturers, but I chose OEM because it was more reasonable with ICRelay.
Refreshingly more than meets the eye, as you would expect from an OEMOption.
The wiring of the Turn signalBody has been treated with a connector so that it can be installed without damaging the wiring.
Relay is under Tank, so I think it would be better to ask Shop, etc.
Of course, it is ICRelay, so it does not make any operating noise.
View detail
Right size
Found this fog light attractive and the size is just nice to fix it on my MT09. It would be great if it's come with dual colour. Quality is excellent. View detail