Reviews
Fits: その他 , HONDA CB400SS, YAMAHA SR400, YAMAHA SR500
It exchanged, when changing a headlight. In the case of SR, the diameter of Faulk is phi 35. Exchange of light stay is required for a separate handle also in the case of exchange. Although I think that appearance has liking, since the bali on
It exchanged, when changing a headlight.
In the case of SR, the diameter of Faulk is phi 35.
Exchange of light stay is required for a separate handle also in the case of exchange.
Although I think that appearance has liking, since the bali on the back worried it for a while although the goods themselves were ground finely, it will be set to *-1.
View detail
![Digital Meter Bracket [TYPE B]](https://img.webike-cdn.net/catalogue/10317/414-011-0400_image-1_TS.jpg)
TYPE-B was purchased as a result of wavering with TYPE-A. Since attachment vehicles were the ducatis 998, there is no space in the circumference of a meter, and it attached to the bolt which is fixing the tachometer. It was able to attach very fin
TYPE-B was purchased as a result of wavering with TYPE-A.
Since attachment vehicles were the ducatis 998, there is no space in the circumference of a meter, and it attached to the bolt which is fixing the tachometer.
It was able to attach very finely, without a bracket overflowing and appearing, even after attaching, since it was a size which carries out a just fit to a multi-temp meter.
Moreover, according to the product made from carbon, since it was lightweight, it considered during the run that vibration occurred in other parts, but there was no such thing at all.
Although it is small parts, there is only a product made from a yoshimura truly and rigidity is also solid.
It has fitted in the tachometer right-hand side of 998 finely, and since it can be used after the circumference of a meter has felt it refreshed, it is very much satisfied.
They are parts which are recommended fixed places and it makes especially the direction that has ridden on 916 systems regard as it using for a trial very much.
View detail
It is used for the cub C90. Since use of the rear normal blinker of a cub had become impossible, what is likely to be attached simply [ it is not so large and ] was looked for, and this was found. Since it is a rubber with a soft portion of stay,
It is used for the cub C90.
Since use of the rear normal blinker of a cub had become impossible, what is likely to be attached simply [ it is not so large and ] was looked for, and this was found.
Since it is a rubber with a soft portion of stay, it does not break, even if it collides somewhat.
Although it is very pleasing in the size right individual just, from the friend who runs together, it is too small and it may be said that it is hard to see.
View detail
It has attached to MF08 forza. Since the pure halogen bulb was too yellow and disagreeable, it was changed. There is no blueness, and although it is quite close to white, when seeing from layman's appraisal, it has been said that it does not chang
It has attached to MF08 forza.
Since the pure halogen bulb was too yellow and disagreeable, it was changed.
There is no blueness, and although it is quite close to white, when seeing from layman's appraisal, it has been said that it does not change that it is not much pure.
An authentic positive one is a recommend at too yellow a person [ blueness ] ... if it is GT-X and XREME but.
View detail
It is light! It is thin! It contributes to the small size ! and a weight saving. It seems that there is no problem also in reinforcement although the hole was made in this side and the blinker is attached directly.
It is light! It is thin! It contributes to the small size ! and a weight saving.
It seems that there is no problem also in reinforcement although the hole was made in this side and the blinker is attached directly.
View detail
Fits: SUZUKI GRASS TRACKER, SUZUKI VOLTY, KAWASAKI 250TR, Others
It is tabular, and since it is sent, you have to twist around Faulk by yourself. Although it is difficult to unite just, it will be OK, if it does carefully since there is nothing also so firmly. Since most was steel and was a combination type of
It is tabular, and since it is sent, you have to twist around Faulk by yourself.
Although it is difficult to unite just, it will be OK, if it does carefully since there is nothing also so firmly.
Since most was steel and was a combination type of two sheets, other manufacturers' thing considered corrosion resistance and appearance, and used it as this product.
View detail
He wanted to make the headlight of XR250 bright and the tail lamp and the blinker were LED-ized. An LED blinker requires IC relay. Since this IC relay operates [ an electric lamp or ] and also blinks [ LED, electric lamp mixture, or ] perfectly, i
He wanted to make the headlight of XR250 bright and the tail lamp and the blinker were LED-ized.
An LED blinker requires IC relay.
Since this IC relay operates [ an electric lamp or ] and also blinks [ LED, electric lamp mixture, or ] perfectly, its sudden ball piece is also safe.
View detail
Fits: DUCATI Fits to MONSTER [Monster] 00-04 series (does not fit to some model year square type blinkers), DUCATI Fits to MONSTER [Monster] 00-04 series (does not fit to some model year square type blinkers)
It attached to DUCATI M400 of 04 models. A required tool is OKed only by a plus driver. What is necessary is just to attach in an opposite procedure when it removes, since there is a close resemblance between form and a pure lens. It seems tha
It attached to DUCATI M400 of 04 models.
A required tool is OKed only by a plus driver.
What is necessary is just to attach in an opposite procedure when it removes, since there is a close resemblance between form and a pure lens.
It seems that it sounds since he gets hooked while a screw makes a slot at the time of attachment PAKIPAKIPAKIPAKI, but it is satisfactory.
He has a feeling it is better to attach after removing a screw and taking out waste, since waste is sometimes got blocked.
However, it becomes a form out of which it comes and which is felt, and is inserted in forcibly where width is somewhat larger on the whole.
if a little portion on which he gets hooked a lens body is deleted since it becomes the touch which floats from a main part a little as a result -- SHIKKURI -- ball measure.
It seems that it is OK since it does not separate at the time of a run even if it does not do so.
I think that they are made goods which can be satisfied since it became a refreshing and a stylish after wearing.
Since it can do custom at a low price with a little less than 3000 yen in order, I regard what a hand tends to take out as it being charm.
A using feeling thinks that blink came to stand out from the blinker of normal.
View detail
Since the rear fender was large and there was no light feeling, DR-Z was purchased. I think that the direction which is attached and can be improved to some extent as Ho can be attached with Quan Tan. I think that it became the appearance which ba
Since the rear fender was large and there was no light feeling, DR-Z was purchased.
I think that the direction which is attached and can be improved to some extent as Ho can be attached with Quan Tan.
I think that it became the appearance which balanced the engine performance of the run as attached comment.
Although there is no telling how be daytime, it is about [ dazzling ] night.
Although durability is not known yet, I purchase and think that it was good.
View detail
The circumference of beam comment with purchase and rear one is a refreshing because of a dress-up up and power saving. - A number plate also shines finely palely and a stop-lamp also comes on sharply. (The lamp of a number plate is bright in the
The circumference of beam comment with purchase and rear one is a refreshing because of a dress-up up and power saving.
- A number plate also shines finely palely and a stop-lamp also comes on sharply.
(The lamp of a number plate is bright in the purer one) It seems that water has not flown even a rainy day at the back although - mudguard was removed.
(It is ... although mud is not known) Although attachment is easy, a plug is required for it.
It is because the attached plug is not so good in order to change one terminal of wiring.
View detail
Since the overhang of a normal blinker was worrisome, it purchased. although the register kit was also purchased collectively, in exchange of a rear chisel, it is unnecessary -- it was . A good point: A parenthesis of - appearance is good. - A
Since the overhang of a normal blinker was worrisome, it purchased.
although the register kit was also purchased collectively, in exchange of a rear chisel, it is unnecessary -- it was .
A good point: A parenthesis of - appearance is good.
- Attachment is easy at double-stick tape (depending on a place, the drilling process for wiring is required).
- Repair parts can purchase with a components single article (I think that this is very conscientious).
A bad point: The cover is not attached to - plug terminal.
although it is mere dress-up parts, subsequently it is alike, and air resistance also decreases, and begins to meet, and it is very pleasing individually.
View detail
do you change and understand immediately -- when it changed white from the pure (smile) yellowish color, it was visible to the race ish, and, of course, the visibility of the run at night also went up. The riding of night became pleasant.
do you change and understand immediately -- when it changed white from the pure (smile) yellowish color, it was visible to the race ish, and, of course, the visibility of the run at night also went up.
The riding of night became pleasant.
View detail
the LED-ized 3rd phase of own car TDM (smile) -- LED of a position ball -- it is-izing. This as well as a tail lamp is only the handiness exchanged for a pure position ball. It becomes a pale light and is satisfied! Although it is ..., if a headli
the LED-ized 3rd phase of own car TDM (smile) -- LED of a position ball -- it is-izing.
This as well as a tail lamp is only the handiness exchanged for a pure position ball.
It becomes a pale light and is satisfied! Although it is ..., if a headlight is made to turn on simultaneously with a position ball, will you feel it yellow compared with a pale light of LED, although the headlight valve is replaced to the efficient bulb, and will HID become wanting (bitter smile)?
View detail
He thought that he would renew the front of a skywave (burgman), and it purchased. Since a color is not reflected at the time of a stop, it is good touch. At the time of a run, in the case of, since the light is switched on as a position, I feel t
He thought that he would renew the front of a skywave (burgman), and it purchased.
Since a color is not reflected at the time of a stop, it is good touch.
At the time of a run, in the case of, since the light is switched on as a position, I feel that the meaning changed as it is pure is lost.
Since it is an article good as goods, in a direction to decide smartly at the time of a stop, it is a recommend!
View detail
After spraying to a chain, it brushes firmly. Although started, since it is hard to dry, time and effort can be brushed calmly. Most dirt remained also in the brush after chain cleaning, and it was a state (it seems that the dirt of the brush had
After spraying to a chain, it brushes firmly.
Although started, since it is hard to dry, time and effort can be brushed calmly.
Most dirt remained also in the brush after chain cleaning, and it was a state (it seems that the dirt of the brush had also come off at the time of chain cleaning).
However, since it will wash with water, it is troublesome to make it dry.
It is after [ in my case ] washing. Wipe off, and it neglect -> Wipes off -> half a day, and is -> chain lube. It is the condition to say.
View detail
When the heavy image of RIA favored, it became light and felt it refreshed. The form of a lamp also fits XR like a pure option. It was able to do without worrying also about wiring weak, since it was only for XR although the press-fit tool of the
When the heavy image of RIA favored, it became light and felt it refreshed.
The form of a lamp also fits XR like a pure option.
It was able to do without worrying also about wiring weak, since it was only for XR although the press-fit tool of the plug terminal was needed for attachment.
Since it equipped with the manufacturer's LED blinker, it is large satisfaction at the smartness of the sight of its back at night.
View detail
Fits: HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, KAWASAKI ZRX400II, KAWASAKI ZRX400II, KAWASAKI ZRX400II, KAWASAKI ZRX400II, KAWASAKI ZRX400II, KAWASAKI ZRX400II, KAWASAKI BALIUS2, KAWASAKI BALIUS2, KAWASAKI BALIUS2, KAWASAKI BALIUS2, KAWASAKI BALIUS2
They are those with a difficulty to attachment -- brand-name parts must also be used and the nail of attaching must be bent. Moreover, those with the necessity that a pure twist also pushes in a harness since an inside becomes narrow. The engine p
They are those with a difficulty to attachment -- brand-name parts must also be used and the nail of attaching must be bent.
Moreover, those with the necessity that a pure twist also pushes in a harness since an inside becomes narrow.
The engine performance itself has no problem brightly.
View detail
Since attachment was completed with one driver of +, it was very easy!! The beginners who do not independently need to buy an orange ball specially since an after electric lamp is also a set, and understand nothing are OK!! It passes also along an automob
Since attachment was completed with one driver of +, it was very easy!! The beginners who do not independently need to buy an orange ball specially since an after electric lamp is also a set, and understand nothing are OK!! It passes also along an automobile inspection perfectly!!! View detail
BALIUS2 was equipped. Since it only exchanges for a pure lens, work can be done very simply. It is cheap, and also the dress-up effect up is also high, and it is very one recommended article. However, structure of the portion of the nail of a
BALIUS2 was equipped.
Since it only exchanges for a pure lens, work can be done very simply.
It is cheap, and also the dress-up effect up is also high, and it is very one recommended article.
However, structure of the portion of the nail of a lens is sweet, and if a screw is tightened, it is regrettable that the opposite side has come floating.
Although it is in a commodity introducing page with clear for the front lefts, it can use for all front and rear, right and left.
View detail
Fits: Others
It attached to xjr1300. It was a cinch when cutting and uniting the stick of the rubber between stay and Wright in the home center, since the size was somewhat small. Appearance and brightness are good. The direction of the bikini cowl stretch
It attached to xjr1300.
It was a cinch when cutting and uniting the stick of the rubber between stay and Wright in the home center, since the size was somewhat small.
Appearance and brightness are good.
The direction of the bikini cowl stretched the rubber and it stopped moving it on Wright.
Although processing was somewhat required, it attached simply.
View detail