Reviews
Used for crf250rallyRear blinker
Used when replacing crf250rallyBlinker
RightBlinker is Blue.
However, the Minus-side Connector is not sold at KITACOConvenienceParts, so it must be purchased at another electrical shop.
View detail
Fits: HONDA Rebel250, HONDA GB350, HONDA GB350S, HONDA 400X, HONDA Rebel500, HONDA CB650R, HONDA CRF1000L, HONDA NT1100, HONDA Rebel1100, HONDA CB650R
For Dress-up
Perfect for a little dress-up
It was easy and quick to install.
View detail
Required for installation of external Blinker!
I purchased this kit to install an external (DAYTONA) Blinker as a modification of the Fender Eliminator Kit.
It was not listed as a compatible car model, but I was able to install it without any problems.
Quantity:1 Set of 4pcs. but Quantity:Pair (for Left and Right) Two sheets are used at a time in the following table.
It was more than double the price of other companies' products, but Material:I chose this product because it was aluminum. I am satisfied with the quality and feel.
View detail
The texture of pressing the Switch is great.
Since the NSR50 does not have the OEM Kill switch, I installed the Kill switch on the Minus side of the Ignition coil. The quality of pressing the switch is much better than the cheap ones made by Chinese manufacturers! The only thing is that the price is a little bit expensive for MinusPoint. View detail
Concept is the best!
The position of the OEMB blinker on the Ninja 250SL is not good anyway (the front side cracks when it rolls over standing up, and the rear side cannot carry a side bag). I was wondering what to do with the Rear blinker, and after much deliberation, I decided to purchase this product. I'm not sure if it's a good idea to use a "Paste Type" blinker, but it's a good idea to use a "Rear Blinker" blinker! View detail
Pricey but convenient for beginners
I think it is very convenient for amateurs to connect Motorcycle wires such as Blinker or Tail lamp. First, strip the cord, twist the wire that appears, insert it into the hole in the plastic part of this Connector, and snap it with pliers or something, and you have One Side. Do the same for the other side. The finished products are made of Male and Female, so you can connect them properly by plugging them into each other. It is an excellent product. However, if it is difficult to connect the wires, it is of course useful, but if you have a spacious place and have some room in length, I think it is best to put a solder on it.
The price is high and the cosmetics are not so good. But I think it's useful if you're in a hurry, a very beginner, or in a small space.
View detail
Fits: HONDA CBR1000RR FIREBLADE, HONDA CBR600RR, HONDA CBR600RR
For Meter Protection
Purchased for Meter protection as per Title
It came with two sheets, AntiglareType and Super clearType, and I thought it would be nice to be able to choose the one I prefer.
Antiglare was selected for this project and Super clear was kept as a spare.
The accuracy is a little low and some parts are not fully covered, but it is acceptable. The view is not particularly different.
View detail
It's so bright!
The OEM headlamp was too dark and I was not satisfied with it, so I installed it. As a result, I am satisfied with Large! The brightness is up by 50%. I am very happy to be able to drive quite safely at night on my commute to work and on mountain passes, etc.! However, the durability is a little low, and the low beam went out after about 3 years. But it's tolerable because it's quite bright! Recommendation! View detail
A truly versatile product
I also use it to put together PC wiring. It is sold by piece, which I think is quite rare, so it is a recommendation for those who want a few! View detail
Frosted Material with high texture
I used this product to wiring up my Ninja250SL's sub-computer and USB. Honestly, you can use Curing Tape instead of this product, but this product is pre-cut, so it is easy to work with, and it looks overwhelmingly good, so it is a Recommendation! View detail
Fits: KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI Ninja 250, KAWASAKI Ninja 400R (-2013), KAWASAKI ER-6f, KAWASAKI ER-4n
Easy
It is easy to install and very nice to be able to sequentialize easily. View detail
Fits: Others
Bright! Expect durability
Used for SUPER CUB110JA59.
The previous SUPER CUB110JA44First Model Type had a Wedge type Tail Bulb, so I chose the same Manufacturer's LED Bulb again because I had been using LEDs for 6 years without any complaints.
As shown in the Manufacturer's compatibility information, I bought Type L8184 because License Plate Light is the lower type.
It was easy to install with no problems.
Since the replacement only requires the removal of the tail lens, the work can be completed in 5 minutes.
When installed, the Tail, Stop, and License Plate Light each emit a separate light, and this should be acceptable in terms of traffic laws.
The brightness and sharpness of the lighting is also that of the LED Merit, and I am sure that this will be well recognized by following cars.
I expect it to be durable enough to be used for more than 6 years without bulb breakage like the last time.
The price is many times that of a regular light bulb, but the peace of mind you get is more than worth it when you consider that you ride to work every day.
View detail
Good for those who think it's good.
I did this as the inside of the Meter was getting swollen, but if you like the OEM look (the old look), I would not do the Recommendation. It will look and feel new.
It is better to have the Double-sided Tape on the back from the beginning to avoid any hassle.
View detail
For SecondMotorcycle
Used for charger for Shorai Battery
No need for people to use the charger included Cable
View detail
Fits: YAMAHA XSR700, YAMAHA XSR700
Paris bag
We purchased this Bracket because the OEM Product was sticking out and felt like it was floating.
It is now in front and much better than NORMAL.
But the keys are a little Large weird!
View detail
Good feeling
The Blinker light emitting part is covered by the Number, so I bought it to expand it outward.
Used for KOSO LED Blinker
It's a nice miscalculation to have a CinderellaFit that looks like it's made to measure, even though they are from different manufacturers.
Satisfied with no cheapness in the texture
View detail
Replaced due to poor contact
This is a regulator to protect Digital meter. Recently, the power supply of the meter was frequently turned off, and we traced the problem back to this Mini regulator. I replaced the Mini regulator because it had been used for more than 15 years and seemed to be causing poor contact due to age-related deterioration. After the replacement, the event that the power supply of the Meter falls did not occur anymore, but it is only confirmed in Idling state, so I would like to confirm it by running the Meter. View detail
No need to provide a phone and connection Cable
It allows you to connect directly to your phone when supplying power to your phone. I find it very convenient not to have to have a separate short USB Cable, and I think it looks much nicer than having a USB Socket attached to the Handlebar. I feel the price is a bit high, but I use it very conveniently. View detail
It is usually convenient.
I think it is a standard product, but it is very useful. If I had a wish, I think it would be more convenient if the cable could be directly inserted without using the Bullet Type Terminal, since the cable is never separated at the Bullet Terminal anyway. Also, I think it would be easier to install if it were 1mm thinner and smaller. View detail
Fits: HONDA CB1300SF, HONDA CB1300SB, HONDA CB400SF SPECIII
Good product as long as the connector fits
There are several similar LED Tail Lamps sold by HONDA, AP something, Posh, DOREMI, and others.
I looked at many installation articles and youtube, and Posh was the best choice for me, but it was also the most expensive. Of course, I don't know if they are made in Japan or not, but I was thinking of going with DOREMI because Posh and DOREMI at the top seemed somewhat trustworthy, but then I saw them on Yahoo Auctions at a price that looked like they were made in China, so I bought them. (It was DOREMI no matter how you look at it from the picture and the color of the cord)
It said something like "Connector needs to be replaced depending on the year …" but I thought I could probably pimp it out, but unfortunately, my 2011 CB400SB (NC42-130) had the wrong Connector and I immediately went to AMAZON and I ordered DAYTONAHMWaterproof Connector. (Webike is cheaper, but I needed a Large connector as soon as possible.)
I thought I had done a lot of research to make sure I connected the right way, but when I finally finished and tried it out, I found that the connection was not correct. Stop-lamp won't work!!!!"
Honda Motorcycle is Yellow/Green, Green, White/Green, DOREMI is Red, Yellow, Black... I went back to the Net and checked Q&A. The more I looked, the more exceptional answers came up, and I was at my wit's end. So I called the DOREMI head office and asked them to look into it. (They were very polite!). In the end, the answer was Red is for when you step on the Brake, Yellow is for the Tail lamp that is always on, and Black is for Earth. It is certainly the most imaginative shade. It is certainly the easiest shade to imagine. Then the complication is Honda, but I was able to work that out through research.
I took it apart again and looked at it carefully, and found that the black color of Earth was correct, but the red and yellow colors were reversed.
Thanks to the person who answered the phone at DOREMI headquarters, the Stop-lamp now lights up properly. (Thank you very much for your help on the phone at the DOREMI head office.:(I think it would be great if it was a Set)
I know it's a bit presumptuous of me to post my impressions of the DOREMILED Tail Lamp without having bought it from Webike, but I thought it might be troublesome if someone new to MotorcycleMachine, like me, decides to replace it with this product on his/her own. I thought I'd post my impressions.
The product itself is very nice, with the Cushion Tape attached from the beginning and the same size as the original OEM product. So, I have no complaints about the product itself, but the Connector that can convert from 3Pin connector to HMWaterproof Connector is not available in quantity.:I think it would be perfect if it were a Set.
Blinker about a month ago. [Color] I replaced it with Clear and now the Tail lamp. [Color] Since I decided on Clear, I think the color unifies the WhiteSilver CB400SB and makes it look awesome and fearless. I am very satisfied with the result.
View detail