Motorcycle Electrical Reviews

Filter

Write a review and get Webike Points!

Reviews

HORNET600 (CB600F, 599) Electrical Clear all

H.Craft

24 Sep 2023

HONDA Three-Phase AC Regulator

Fits: HONDA CB-1, HONDA CBR400RR, HONDA CBR400RR, HONDA CBR600F, HONDA NSR250R, HONDA NSR250R, HONDA RVF400, HONDA VFR400R, HONDA VTR250, HONDA VTR250, HONDA VT250 Spada, HONDA jade, HONDA CBR600F, HONDA foresight, HONDA CBR600F, HONDA CB600, HONDA CB400FOUR (water-cooled), HONDA CBR600F, HONDA VFR750F, HONDA CBR250RR (MC22)

Japanese Webike user

4/5

No problems so far.

[How is it used?
NSR250R (MC21) The original Regulator of the "M" was replaced because it was defective.
I had assumed that OEM parts would be quite expensive, but after purchasing the product, I learned that there was not that much difference in Large.

Was the one you received as per Image?
What has been attached so far (OEM？) There are slight differences between the two, but they are generally the same shape.

Was the installation difficult?
With MC21, I couldn't access directly, so I had to remove the Tail cowl before I could work on it.
If Cowl is removed, access is possible from both SIDE, so it is not that Large strange.

How was your experience with it?
The voltage became unstable while driving, and the power consumption became higher when the headlight was turned on.
I have a voltmeter on the car body, Idling, and the voltage is now stable while driving.
So far the symptoms related to Regulator have been cured, but I am a bit worried because many of the past Impressions I have seen have been ruined after a while.
At least it is working properly for now.

[Included Parts:were they on?
Boltetc. must be prepared separately or use the one that came with the product.

[Was there anything that disappointed you?
I'm happy with it so far.

【Review】
I have just started using it and have had no problems with it.
To be honest, there is not that much price difference between OEM Parts and OEM Parts at the moment, so OEM may be a safer choice. View detail

H.Craft

18 Sep 2023

HONDA Three-Phase AC Regulator

Japanese Webike user

1/5

I was thinking OEM.

It was a little cheaper than HondaOEM and I thought it would be the same, so I used it, but it seemed to heat up quite a bit and I was worried, so I replaced it.
After all, it is safer to use HondaOEM Product even if it is a little expensive. View detail

YOSHIMURA

17 Aug 2023

Sensor for PRO-GRESS Type -C

Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R400, SUZUKI GSX-R1000, SUZUKI GSX-R1100, SUZUKI GSX-R1000, SUZUKI B-KING, SUZUKI GSR750, KAWASAKI ZZR400, KAWASAKI ZZR250, KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1100/ZX-11, KAWASAKI ZXR400, KAWASAKI ZXR250

Japanese Webike user

3/5

Buy for Repair

[How is it used?
I originally used a YOSHIMURA water temperature gauge, but purchased it as a repair item because the Sensor's Wiring had been disconnected.

Was the one you received as per Image?
Since the sensor was originally attached, the shape, etc. were as per the Image.
I wonder if it was a problem with the ROD or the spec. at the time. In the Webig image, the Sensor part was red in color and the Connector part was black, but the product I received was gold in Sensor part and white in Connector part.
Although the color is different, I don't particularly care because I could use it without any problem.

Was the installation difficult?
Since it was a replacement for the sensor that was originally attached, we replaced it in the same way as removing and tightening the screws.
It happened that the coolant was replaced at the same time, so it was not that Large strange, but if you try to replace it without draining the coolant, it will be Large strange.

How was your experience with it?
Water temperatures that were not displayed are now displayed properly.

[Included Parts:were they on?
Sensor only.

[Was there anything that disappointed you?
It is an exclusive product, but the price is higher than other companies' products.

Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer View detail

YOSHIMURA

16 Aug 2023

Sensor for PRO-GRESS Type -C

Japanese Webike user

5/5

Water temperature sensor

Used for Progress2 installation.
I think it is also nice that the Seal tape is wrapped from the beginning.
When installing the Coolant, we did not pull out all of the Coolant, but just a little bit where the Sensor hits the Coolant, and then we sucked out and installed it. View detail

Universal Bullet Blinker Front and Rear Set

ai-net

12 Aug 2023

Universal Bullet Blinker Front and Rear Set

Fits: HARLEY-DAVIDSON FXLR DYNA LOWRIDER, HARLEY-DAVIDSON FXSTC SOFTAIL CUSTOM, HARLEY-DAVIDSON XL1200, HARLEY-DAVIDSON SPORTSTER FORTYEIGHT, HONDA VT1100, HONDA VT1100, HONDA valkyrie, HONDA valkyrie, KAWASAKI Eliminator 400, KAWASAKI Eliminator 400, KAWASAKI Eliminator 400, KAWASAKI Eliminator 750, HARLEY-DAVIDSON 883, HONDA Shadow Custom, HONDA shadow, HONDA shadow slasher, SUZUKI Desperado X, YAMAHA DS, YAMAHA DSC, YAMAHA Virago XV920

Japanese Webike user

3/5

It looks reasonably luxurious, but...

It looks good, but Valve is no good. It ran out in half a day. It is better to prepare it beforehand. Still, for the price, it is satisfactory and a good value for money, so I can recommend it. View detail

MADMAX

13 Jun 2023

Round TypeEuropean blinker

Fits: KAWASAKI ZEPHYR400χ, HONDA CB1000SF, HONDA CB1300SF, HONDA CB400SF, HONDA CB400SS, HONDA CB750, HONDA CD50, HONDA CL400, HONDA GB250 CLUBMAN, HONDA JADE, HONDA NS-1, HONDA ST50, HONDA VTR250, HONDA X11, HONDA X4, HONDA APE 100, HONDA APE 50, HONDA GORILLA, HONDA SHADOW400, HONDA CHALY

Japanese Webike user

1/5

The foundation.

I bought it thinking it would come with it, but it was only CoverLens.
I wish you had Appealed a little more about it not coming with a foundation. View detail

YOSHIMURA

13 May 2023

Sensor for PRO-GRESS Type -C

Japanese Webike user

4/5

cb400sf Progress2

Purchased as Sensor to attach Progress2 to cb400sf
The temperature was firmly detected and displayed.
Durability is still unknown. View detail

YOSHIMURA

03 May 2023

Sensor for PRO-GRESS Type -C

Japanese Webike user

3/5

Used for water temperature gauge of GPZ900R.

I am wearing YOSHIMURA's Progress2 on my NINJA and have been using it only for oil temperature for a long time.
I finally installed it today to measure the water temperature as well.
KOSO joints were used for the installation.
YOSHIMURA's Joint was too expensive for me to afford.

Pitch is the same, and I checked the Sensor status after installation.
Large sturdy as it was popping out from the inner surface of the Joint.
When the Engine is started, the water temperature rises faster than Oil.
I thought it would be a good idea to Check Oil when starting and Water Temp when running. View detail

YOSHIMURA

24 Dec 2022

Sensor for PRO-GRESS Type -C

Japanese Webike user

4/5

Sensor for Water Temperature Sensor Adapter.

Purchased to attach to Water Temperature Sensor Adapter
Seal tape is applied to the screw part of the sensor.
The direction of screw tightening and winding were the same.
It would be better if it were wound in the opposite direction.
There is no way that Mr. YOSHIMURA does not know about this, so it must be a mistake by the manufacturer's workers. View detail

YOSHIMURA

09 Dec 2022

Sensor for PRO-GRESS Type -C

Japanese Webike user

4/5

pt1/8 28 is the same as pt1/8

It could be installed directly on KOSO's sensor adapter.
I love that it has seal tape wrapped around it! View detail

YOSHIMURA

29 Oct 2022

Sensor for PRO-GRESS Type -C

Japanese Webike user

5/5

Oil temperature control

For CB400FOUR YOSHIMURA PRO-GRESS2Multi-temp meter mounting

If the sensor is attached to the oil drain bolt, it must be removed every time the oil is changed.
The sensor is taken from PassCap under the Point cover.
・ DAYTONA (34913) Sensor Fitting for Oil Temperature

The above Fitting is compatible with the
・ Sensor Type-C for PRO-GRESS 'It's good to be here' View detail

MADMAX

16 Sep 2022

Round TypeEuropean blinker

Japanese Webike user

1/5

Mounting Bracket must be included.

I know you wrote that, but looking at the image, I mistakenly thought that the base was also included. View detail

H.Craft

06 Sep 2022

HONDA Three-Phase AC Regulator

Japanese Webike user

3/5

Puncture in less than a year

I was expecting this regulator to be a good choice because it has a Heat Radiation Fin, but it's just another brand product.
However, I think it would be good to have it as a spare Parts, as a good luck charm. Since it is an old Motorcycle, it is nice to have the Parts. View detail

OEM Repair for Blinker with Other Company Position (for Left and Right)

ai-net

30 Aug 2022

OEM Repair for Blinker with Other Company Position (for Left and Right)

Fits: HONDA jade, HONDA VTR250, HONDA CB-1, HONDA CB400SF, HONDA CB400SF, HONDA CB1000 SF (Big One), HONDA CB1300 SF, HONDA HORNET600, HONDA HORNET900, HONDA HORNET250

Japanese Webike user

1/5

Requires modification for installation

There is no waterproofPacking between Lens and Body.
Bulb Socket is not well fixed and is playing rattling around inside.
Some car models require modification to the base of the Blinker mounting area.
I did not install it because I was not sure about its durability. View detail

OEM Repair for Other Company Blinker (for Left and Right)

ai-net

30 Aug 2022

OEM Repair for Other Company Blinker (for Left and Right)

Fits: HONDA CB-1, HONDA VTR250, HONDA jade, HONDA HORNET900, HONDA HORNET600, HONDA HORNET250, HONDA CB400SF, HONDA CB1300 SF, HONDA CB400SF, HONDA CB1000 SF (Big One)

Japanese Webike user

1/5

Modifications are assumed to be Large.

The first Valve that comes with it is a 5W Wedge bulb even though it is a Blinker.
To replace it with a 21W Single Bulb, a Large modification of the Socket section is required.
There is no WaterproofPacking between Body and Lens.
In the end, it was not installed. View detail

YOSHIMURA

17 Jul 2022

Sensor For PRO-GRESS Type -C

Japanese Webike user

5/5

Small and discreet is good.

I installed it on my KATANA. I purchased the C Type because I modified the OilPressure part to install the Sensor. View detail

H.Craft

22 Sep 2021

HONDA Three-Phase AC Regulator

Japanese Webike user

3/5

somehow not quite right

I still think OEM is the way to go. View detail

H.Craft

17 Sep 2021

HONDA Three-Phase AC Regulator

Japanese Webike user

4/5

I'm not an OEM.

It's an old motorcycle so I replaced it before it failed. The work is easy, just remove the Cowl and replace with OEM. The bolt holes for installation are Exactly the same, so there is no need for machining, and even a beginner can easily replace it. As for the performance, it is not possible to say without using it for a long time, but because the fin for the heat radiation which is not in OEM is attached, it is possible to use it. "Aren't they hard to break down?" What a great expectation. View detail

YOSHIMURA

02 May 2021

Temp Meter Sensor [TYPE-C]

Fits: YAMAHA FZ250 FAZER, HONDA CBR500R, YAMAHA MAJESTY250(SG03J), YAMAHA MAJESTY250(4HC), YAMAHA YZF750SP, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA V-MAX 1200, YAMAHA TZR250R, YAMAHA TZR125, YAMAHA TRX850, YAMAHA TDR250, YAMAHA TDM850, YAMAHA RZV500R, YAMAHA RZ250R, YAMAHA RZ125, YAMAHA R1-Z, YAMAHA FZX750, YAMAHA FZR750

Japanese Webike user

3/5

Required for YOSHIMURA Meter

[How is it used?
YOSHIMURA Required for Meter.
You have to buy it.
If you wrap the seal tape around the TaperScrew and install it, it won't leak so much.
Easy electrical connection

Was the one you received as per Image?
Yes

Was the installation difficult?
No

How was your experience with it?
usually

[Included Parts:were they on?
None

[Was there anything that disappointed you?
None

I would like to see a lower price. It's essential. View detail

ai-net

16 Jan 2021

OEM Repair For Other Company Blinker (for Left And Right)

Fits: HONDA CB-1, HONDA VTR250, HONDA jade, HONDA HORNET900, HONDA HORNET600, HONDA HORNET250, HONDA CB400SF, HONDA CB1300 SF, HONDA CB400SF, HONDA CB1000 SF (Big One)

Japanese Webike user

5/5

I'm glad I bought it

The Blinker Bracket on my 19991 JADE broke off and blew up.
I bought it at the last minute.
The standard of the Cable is different, and it is only OuterCase that I used.
Cable and Valve both used the old one, but it didn't feel any different.
For the price, this was a super bargain for the quality. View detail