Reviews
To my friend's Motorcycle.
Ordered for installation on a friend's Motorcycle.
The installation went without any problems.
I was thinking that the tools would be a Drill and a Hole saw.
Hole saws are expensive to buy new, so if you don't have one, you should ask a Motorcycle shop for one.
View detail
Fits: YAMAHA XSR700, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900, YAMAHA NMAX155, YAMAHA XSR900, YAMAHA TRACER GT, YAMAHA XSR700, YAMAHA TRACER900, YAMAHA MT-09, YAMAHA NIKEN GT, YAMAHA NIKEN, YAMAHA NMAX, YAMAHA MT-09, YAMAHA MT-09, YAMAHA GDP150A (NMAX150), YAMAHA MT-07, YAMAHA GDP125 A (NMAX), YAMAHA XMAX
Used for NMAX155
I purchased this for my NMAX155 with USB and Wiring from Attachment power supply.
There were no particular difficulties during the actual installation, and the USB was successfully attached and used.
Just by purchasing this, you can easily install electrical components, so there is no loss in purchasing it considering the time and effort required for modification.
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA TRACER9 GT
one-key transmission
Used for one-keying of BOXes
It is easy to assemble as long as you know the key structure.
I am glad that Spring, which often loses them, has a spare.
If it were a little cheaper, there would be nothing to say...
View detail
Fits: YAMAHA Bolt C Spec, YAMAHA bolt, YAMAHA bolt, YAMAHA bolt
In addition to the OEMSaddle Bag
The Bolt's rear blinker is located in a position where it easily interferes with the saddle bag attachment, making the choice of a saddle bag surprisingly difficult. By using this Relocation Kit, the interference between the blinker and the bag can be almost eliminated, and the selection of not only OEM products but also external saddle bags can be expanded to a large size. If you are having trouble choosing and installing a saddle bag because of the blinker, we recommend this kit. View detail
Fits: YAMAHA YZF-R25, YAMAHA XSR700, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900, YAMAHA YZF-R3, YAMAHA SEROW250, YAMAHA XG250 TRICKER, YAMAHA YZF-R25, YAMAHA XSR900, YAMAHA V-MAX 1680, YAMAHA V-MAX 1680, YAMAHA V-MAX 1680, YAMAHA XSR700, YAMAHA TRACER900, YAMAHA TRACER GT, YAMAHA MT-07, YAMAHA MT-09
This is my third purchase.
I installed it on my XSR900 and had a hard time getting the Service power from the back of the Headlight. I have purchased this product many times and I trust it. View detail
Fits: YAMAHA XSR700, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA CYGNUS Gryphus, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA NIKEN, YAMAHA XSR700, YAMAHA XSR900, YAMAHA NIKEN GT, YAMAHA MT-10, YAMAHA TRACER GT, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-07, YAMAHA YZF-R125, YAMAHA XMAX, YAMAHA YZF-R15
Purchased for USB power supply and power supply for DriveRecorder
To extract power for USB power supply and DriveRecorder for Yamaha BRONCO
Wiring that interrupts and branches to Y's Gear Wire lead2.
The work is very easy, and it is really just a simple installation.
Both USB power supply and DriveRecorder are supplied without any problem.
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA TRACER9 GT
One-keying is convenient
This is a kit to enable YAMAHAEUROCase to be opened and closed with the car body key.
The work can be done with a minimum of a ruler. It is important to read the Instruction Manual carefully. Since the parts are very small, we recommend that you work in a clean place to avoid losing them.
View detail
Fits: YAMAHA XSR700, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900, YAMAHA NMAX155, YAMAHA XSR900, YAMAHA TRACER GT, YAMAHA XSR700, YAMAHA TRACER900, YAMAHA MT-09, YAMAHA NIKEN GT, YAMAHA NIKEN, YAMAHA NMAX, YAMAHA MT-09, YAMAHA MT-09, YAMAHA GDP150A (NMAX150), YAMAHA MT-07, YAMAHA GDP125 A (NMAX), YAMAHA XMAX
Exclusive to Yamaha
[How is it used?
The Harness is designed specifically for Yamaha motorcycles and installs with no problem with Bolt On.
The model is XSR700. It's located behind the Cover next to the Frame.
Was the one you received as per Image?
It is as per Image.
Well, it's just Wiring.
Was the installation difficult?
Installation is easy as these are Yamaha OEM Parts.
How was your experience with it?
I am very grateful for the easy power supply.
I also like that it doesn't damage the harness on the body side.
[Included Parts:were they on?
It came with a Tie Wrap and instructions.
[Was there anything that disappointed you?
I knew before I bought it that it was just a Wiring.
If you have your own Connector, you can make it for a few hundred dollars, but
It's a pain in the ass to buy the Connector individually, so I'll hold off.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Givoshi instead of Connector might be more universal.
View detail
MT-09Tracer (15') Can be mounted on
Y's Gear is compatible with the MT-09 Tracer 900 or later, but the MT-09 Tracer (2015 model) I was able to install it without any problems at all in (from reliable sources) Case in point. (determined by the information of the). Fog Lamp of the specification product of PIAA is installed (it is pontooned to OptionHarness in Cowl, but it is high & hellip;), but the hole like Bolt hole is opened in Bracket, it seems that Other Brand Product may be attached depending on the device (self responsibility). As of now Camera of Drorecco has been installed in Mounting Bolt of Fog Lamp, inserting the Bracket of the letter L in between. View detail
Required for Y's Gear USB Socket installation
Required to install the USB Socket on Y's Gear, but this Socket output is weak So to be clear, the 12V Socket in the Glove box has a commercial It might be better to use it with a USBAdapter View detail
Fits: YAMAHA XSR700, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900, YAMAHA NMAX155, YAMAHA XSR900, YAMAHA TRACER GT, YAMAHA XSR700, YAMAHA TRACER900, YAMAHA MT-09, YAMAHA NIKEN GT, YAMAHA NIKEN, YAMAHA NMAX, YAMAHA MT-09, YAMAHA MT-09, YAMAHA GDP150A (NMAX150), YAMAHA MT-07, YAMAHA GDP125 A (NMAX), YAMAHA XMAX
Installed on NMAX
I installed it in NMAX, but when I open the front cover and see the wiring part, I put it here There was a Connector that asked me to give it to you, and I installed it, but I ran out of Fuse
In fact, it is made to interrupt the Connector next to the blinker relay, but I found it at first sight It's hard to do
There is no Instruction Manual, so I'd like to see a more detailed version of this book I'd love to have one, and I'd recommend the Trident Connector for NMAX
View detail
Fits: YAMAHA YZF-R3, YAMAHA MT03, YAMAHA MAXAM, YAMAHA Bolt CSpecifications, YAMAHA Bolt CSpecifications, YAMAHA Bolt, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA XG250 TRICKER, YAMAHA DRAGSTAR250, YAMAHA SEROW250, YAMAHA DRAGSTAR250, YAMAHA GRAND MAJESTY400, YAMAHA GRAND MAJESTY400, YAMAHA GRAND MAJESTY400
The MT-25 does not come with a single body
YAMAHA OEMWire lead is required
As long as you have that, assembly is easy
You can take three power outlets
The main power supply is taken from the Battery, but in between, the Relay and 10AFuse (included) are used This is a Kit that is sandwiched between the
And BodyFlasher relay, 6V MONKEY/GORILLA Main You need to put a wire lead (Q5K-YSK-084-U02) (sold separately) between the Harness There is no circuit
It is also necessary to crimp the Receptacle coupler attached to the device side Cable Yes, there is (The Receptacle coupler is included.)
In addition, there is no need to connect the BatteryPower Supply Cable to the included Flasher The cable is extremely long
They are designed for every situation and need to be cut if necessary
If you have plenty of storage space, I don't think you need to cut it
Whatever it is, it's convenient to take three bites at a time
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA MT-03, YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA YZF-R3
It can also be used with the MT-25
If you want to get power out of the YAMAHAOEMSub harness, this is a must-have part
It is written as for YZF-R25 in the Package, but it can be used for MT-25 as well
You can make it by yourself if you want to, since it is a type to be taken out of the flasher relay
I bought it because I thought it was intensely mendacious
If I were to dare to complain, I would put it down to 6V MONKEY/GORILLA Main Harness The terminals are bare
I was wondering if it was sturdy
View detail
Generally, I'm happy with it too …
I think it's a bit expensive! (Laughs)
The texture is also Matte-like, and although the colors are all available, it's a bit of a mystery to me hellip; …
I am satisfied with the overall quality of the product as it is made by the Manufacturer
View detail
Fits: YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400
Is good
Can be installed without modification
The Blinker no longer interferes with the side bag, making it easier to use
You'll have to work on the Fender inside out, which can be a bit of a challenge if you're on your own
As others have noted in their imprints, the Instruction Manual has little to say about There is no written procedure, so that's my complaint
View detail
Contributing to Dress-up.
Purchased from OEM's Silver ring for Makeover. HeadlightBody is shiny Black, why Ring Matte Black. Also high price. But there are no other choices. View detail
Fits: YAMAHA YZF-R25, YAMAHA XSR700, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900, YAMAHA YZF-R3, YAMAHA SEROW250, YAMAHA XG250 TRICKER, YAMAHA YZF-R25, YAMAHA XSR900, YAMAHA V-MAX 1680, YAMAHA V-MAX 1680, YAMAHA V-MAX 1680, YAMAHA XSR700, YAMAHA TRACER900, YAMAHA TRACER GT, YAMAHA MT-07, YAMAHA MT-09
There is only high
I expect to expect. I am worried about how much Rust will come out. Because the installation was difficult to understand under Handlebar ○ Bracket also has a sense of quality and no dissatisfaction View detail
Take - - - -
OEM Parts So it can not be helped?
If you buy a bolt, the first thing you do not do is to paint Black in the cheap Silver Painting part.
And then crushing Plating.
Among them, the visual effect is amazing because it is the largest Large Plating parts.
However, it is expensive.
It is high monster.
Because OEM has rusted itself, I can not help it without it,
Even if I paint to Plating, it will be peeled so it can not be helped I purchased it with implications.
Every time I saw the car body by replacing the parts, it was okay with this and further suggestion that it was good
I am mad.
Oh, I want to exchange it with Seat of CSpecifications.
View detail
Fits: YAMAHA YZF-R3, YAMAHA MT03, YAMAHA MAXAM, YAMAHA Bolt CSpecifications, YAMAHA Bolt CSpecifications, YAMAHA Bolt, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA XG250 TRICKER, YAMAHA DRAGSTAR250, YAMAHA SEROW250, YAMAHA DRAGSTAR250, YAMAHA GRAND MAJESTY400, YAMAHA GRAND MAJESTY400, YAMAHA GRAND MAJESTY400
Installation is possible in any Motorcycle
If you buy Relay and Wiring it's easy enough to make your own content, but purchasing this because it's awkward to turn around and go around here
Kit Relay Interruption Coupler's Wiring can be attached to any Motorcycle if it is machined according to my Motorcycle
In that case, you only have Bullet Terminal and Crimp Tool or Interrupt ElecTro Tap
The Harness is so long that Bullet Terminal is also useful when shortening according to your own vehicle
The extraction of Ignition signal is also Blinker relay and Position lamp
Honda SL 230 was interrupted by Blinker relay with two-pronged bullet terminal
In the case of SEA BASSSV 1000 S, because I did not want to scratch the vehicle Main harness, I interrupted the part after Position light Coupler with Electro Tap
Of particular interest in this product are SL 230
I installed Cigar socket power supply, digital tachometer, ETC, but Cigar socket is very convenient
The Car without the recent Spare tire comes with the Compact Air pump of the Cigar socket power supply and it is handy for raising and lowering the air pressure of the Tire with the forest road Touring
Although it may get lost in the forest road exploration, it is also encouraging that Cigar socket Charger can use the map application without worrying about the remaining charge of the smartphone.
View detail
Fits: YAMAHA YZF-R3, YAMAHA MT03, YAMAHA MAXAM, YAMAHA Bolt CSpecifications, YAMAHA Bolt CSpecifications, YAMAHA Bolt, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA XG250 TRICKER, YAMAHA DRAGSTAR250, YAMAHA SEROW250, YAMAHA DRAGSTAR250, YAMAHA GRAND MAJESTY400, YAMAHA GRAND MAJESTY400, YAMAHA GRAND MAJESTY400
This is a good thing.
This is a useful thing that can take up to 3 power supplies in one.
Since we can take power from Battery using Relay, Grip heateretc. It is good to have some extra spending on.
The disadvantage of Large is Universal Product, so Wiring is quite large.
I cut and used unnecessary parts.
View detail