Reviews
Reflects light well and contributes to safe driving.
I bought this for Repair because one day I was parking my Motorcycle on the parking lot and it was stripped by the Prank. I am very happy that I was able to attach it to a Fender Eliminator made by another company. The shape is cool too! View detail
A little cheaper would be nice
Short fender was installed along with the conversion to side number.
It is easy to attach with double-sided tape.
It would be helpful if it were cheaper since it is just a Reflector.
View detail
Installation on DF200E OEMRear Carrier
DF200 DJEBEL, but with DF200E OEMRear Carrier.
The DF200E has a long flap on the Rear Fender, like a Camouflage Flap, so it does not have a reflector in the OEM position of the DF200 DJEBEL. Therefore, the reflector is attached to the Rear Carrier, and a bracket is attached to the rear end of the Rear Carrier for mounting the reflector.
I had been riding without a Carrier Reflector for a while, but every time I looked at it, I felt uncomfortable with the mounting bracket growing out of the Carrier. Surprisingly high." We found out that the product was not as good as we had expected, and we decided to buy this product.
It is a product, but probably the same Size as OEM.
I ordered this product thinking that there should not be many different sizes because it is a standardized product, but I found exactly what I was looking for.
The only concern I have is that the OEM may have a protrusion to prevent turning other than the screw. There is a long hole on the mounting bracket other than the screw hole. This may be an anti-turn feature.
Since this product is secured with only one M5Nut, I thought it might loosen due to vibration.
As a countermeasure, we applied double Nut. I drove about 300 km after installation, and there is no loosening as of now.
This should help improve visibility from behind.
I think items useful for safety.
View detail
To make it a Japanese Vehicle Inspection Correspondence
This product is required to make Japanese Vehicle Inspection Correspondence when the side number is set. View detail
Installation complete
I installed it in conjunction with the conversion of 883n to Side number.
I am satisfied with the large size.
I am a little concerned about the durability of double-sided tape.
View detail
Reflector
I wish it had been Bolt On. View detail
Reflector
I changed from a round reflector to a Slim reflector. View detail
NiceIdeas
License Plate of Z125PRO with Small body was installed by exchanging bolt nut.
I have an OEMReflector installed now because it is a Normal fender, but I think it is necessary to stand out when the body is small.
The feeling I got when I put it on the License Plate was not very noticeable, but it was not too small and natural, and it fits in quite nicely.
Also, the angle of the OEM reflector and the License Plate are different from these Parts, so visibility is at its best.
The bolt nut for mounting is attached by inserting the spring, which is also NiceIdeas and plays a role in preventing loosening, so it can be securely attached by simply tightening it by hand.
The product design is also good because the Reflector side is resin, so it is enough to tighten it by hand, and it might be damaged by over-tightening.
I will continue to use it and use it in the future, as it is also available in Fender EliminatorSpec.
View detail
Arrival of goods
I received the product. It was exactly what I ordered with no problems. Thank you very much. View detail
unexpected
I tried to buy an integrated type that does not require a reflector bracket to reduce the burden of the Fender Eliminator, but it was 3mm thick! I found out that this one is heavier than the one I have now with the License Frame and Reflector Bracket. I don't know if it is necessary for License Frame to be this strong, but the thickness should be written in the description. View detail
It fit perfectly!
Fit to the Reflector part under the Number! Double-sided tape is applied for easy installation! View detail
Rear Reflector
I bought this to change the OEMReflector on my YamahaR1-Z. I installed it on my current KTM390DUKE because it didn't look good. This style of reflector seems to suit current vehicles well. View detail
Parenthesis well to be a legitimate Fender Eliminator.
good point
Reflector is Sharp and Parenthesis is good.
Reflector is sturdy with screw mount
A bad point
The mud bounces around a lot. (It can't be helped.)
Parenthesis well to be a legitimate Fender Eliminator.
The Reflector that was attached to the Fender Eliminator Kit on the Grom Fender went away, and I thought about gluing the Reflector back on, but I thought it would fall off again someday, so I bought this product.
I bought it because the shape of the reflector is sharp and has good parenthesis, and the reflector is screwed on, which makes it hard to lose.
I did some off-road driving, but the mud still splattered all over.
I thought about using it on top of my slashed Grom Fender, but it interfered a bit and made a mess, so I decided not to.
I am very happy with this product.
View detail
Kijima 40x40mm Reflector S
The edge of the reflector was not 100% perfect upon close inspection, it seemed to come with some minor scuffs/scratches but it's otherwise a suitable replacement for a JDM Stret Magic TR50. An adhesive pad was included. View detail
To the sober trouble of Fender Eliminatorization
I was thinking that the Mud Guard to be attached to the Swing Arm should be large, and I found this!
To the product name. "Reflector &… but it does not have Reflector
To product information 160mm Long. but the product received is "Approx. 145mmLong When it becomes, and it measures actually, the body part is about 180mm, and it is in the instruction manual. Approximately 145mm longer than the mounting surface. (horizontal length because of the angle)
Originally, it was for KIJIMA's Fender Eliminator, but I tightened the Reflector Bolt to the Reverse side of the KTM OEM Plate Holder that was attached to EP's Fender Eliminator. The Reflector was replaced with a KIJIMA one.
I used Double-sided tape because it is not enough to use only Bolt of Reflector, but it is necessary to take measures against vibration.
I think that it would be better if it were a little cheaper.
View detail
Round tail and Quantity:Set!
I installed it because the Reflector is gone when I put Posh's Round tail on it.
There are many other Reflector products, but I chose this one because it's circular and the License Plate Bolt can be tightened together.
The round tail is also round, and this reflector is also round, so it gives a sense of unity, and there is no need to add a reflector to an unnecessary part!
This is CinderellaFit!
View detail
It's better than nothing
I've been struggling with sand and rain bouncing up and down since I got the Fender Eliminator
I found this product and bought it to try it on
Active's Fender, not KIJIMA's Fender Eliminator It's a Eliminator, so can I install it? But I managed to get it on
Because it was a retrofit Reflector, it is wobbly because of the Frame strength
In addition, you can install the License Plate Holder and use the Double-sided I used tape to secure it in place
Is the bounce-up a little less than it was before you installed it? That's about it
I think it's a bit expensive in terms of Cost
View detail
Off car car wash becomes easier
In a bit more free shipping ... when it is said, purchase without expectation. However, this is Large correct answer.
With Reflector, it is safe at night driving course,
Since it is easy to remove Number by hand without using tools when car wash,
It is useful..
Also, with Spring, there is no loosening when off.
However, fortunately I have not encountered,
To the point that others can easily remove Number
I can not force you to be careful.
View detail
Easy to use
Large square is exactly right size. I thought that even 100 for for Motorcycle would be fine, but please buy it here.
I installed and installed Bracket separately.
I'm glad I bought it.
View detail
In order that there might be no Size specification on a web, it worried about purchase. The Size is entering two piece in elliptical [ of 40mmX20mm ]. It is a soothing grade although catoptric light can be checked also from some slanting angles for
In order that there might be no Size specification on a web, it worried about purchase.
The
Size is entering two piece in elliptical [ of 40mmX20mm ].
It is a soothing grade although catoptric light can be checked also from some slanting angles for
Yamagata.
A flat surface is first, although
goods flesh side has about 2-mm thicker Sponge pressure sensitive adhesive tape, it can stick also on some curve sides very much and it can respond.
Adhesive power is a little high.
Since
goods are small, it treats as an Accessories, and it does not correspond to an automobile inspection.
A FLUSH is not carried out although it is stated as
.
It is what is called a mere passive reflector.
View detail