Reviews
Cool
This is Cool, although I honestly don't know how effective it is.
Red is good.Color:Red is unexpectedly suitable for Gray Motorcycle.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS Cafe
Over Sprocket Cover
I love it because it comes with Design and Change Accent.
I think it is less expensive than other Manufacturers
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS, KAWASAKI Z900RS Cafe
Divert to other cars
Sprocket cover on Z1000
Actually, the 900RS version is on its way.
I don't see it in the lineup for Z1000 because of its unpopularity.
The Z900 is based on the Z1000 Engine.
The Z900RS, which is based on the Z900, would have the same dimensions.
In other words, the Crankcase should be the same for Z1000, Z900 and Z900RS!
And when I tried to match it, I found that it was EXACTLY!
You did it!
Tightening was Torque managed using Torque wrench to no avail.
As for functionality, the Sprocket cover has a Shift holder, which might improve the Shift feeling.
And when I put it on, Wiring, which was hidden by OEMCover, was fully exposed, so I hid Wiring with Tube.
It's hard to see on the STAND side and nobody sees it, but it's self-satisfying.
This part of the hobby thing is the Large thing, isn't it?
It's a functional Part, but when you clean the Chain.
I like the fact that the FrontSprocket part, which was covered and couldn't be flushed with cleaning agent, can now be flushed directly.
Z1000 BaseEngine is ZX9R
In other words, the Sprocket cover for 9R should be able to be installed.
It's nice to be able to divert from a popular car model.
View detail
To prevent mud clogging
I bought the Chain after seeing someone with a Chain that was stuck in the mud and disconnected.
I think people who often rush into mud as well as Dress-up should purchase this product.
View detail
Sketchy Nude
The Driven Sprocket is skewed through the gap, and you can also see the Gold chain, which gives it a very nice appearance. View detail
It gives a sense of custom.
The OEM cover is silver, and the Pivot is silver as well, so replacing it with this black anodized product will give it a customized look.
The SUPER CUB's Chain Guard is just stuck in the pin and comes right off, but the CT110 HUNTER CUB has the tip of the pin melted and crushed, so you have to shave the pin a little to remove it.
It is easier to work with the Change Pedal and Pivot Cover removed as well.
As a side note, when I removed the OEMOption Change Pedal, I found that the screw threads on the fixed bolt were stupid.
View detail
Engraved Shift does not match the 10-13 model
[How is it used? I replaced it in conjunction with the introduction of the company's Light clutch kit.
Was the installation difficult? All I had to do was remove and replace the OEM, but it took me about 3 hours (including cleanup) to clean the accumulated ChainGrease dirt and polish the parts exposed by removing the OEM resin cover, as well as to replace the light clutch kit.
How was your experience with it? It is the self-satisfaction of Dress-up.
[Included Parts:were they on? Gasket and other necessary parts are included.
[Was there anything that disappointed you? I'm considering filling it with Bolt.
[Notes] In the product description of this site, the car model is -13, but on the Manufacturer's website, the car model is for 14 years or later. This is because Shift up to 6-speed is stamped on the product (according to the answer we received from the manufacturer). We have a 2010 model (5-speed), so I would like to hide the 6-speed indication by masking, etc. when the car is inspected. The installation itself was Large sturdy even after -13 years.
View detail
Fits: KAWASAKI ZZR1100/ZX-11, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI ZRX1100II
Standard classic
Was the one you received as per Image?
As per Image.
Was the installation difficult?
It's easy
How was your experience with it?
Looks cool.
View detail
For decoration
It is easy to install., I think it looks and feels custom. View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
one's presence (as felt by others)
The quality is excellent and it is outstanding as dress-up parts. Conversely, other surrounding parts have no choice but to match this product. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS Cafe
It's a good feeling.
I am very satisfied with the appearance.
The installation was not too difficult and I was able to install it myself.
I appreciate that OVER's products come with a good Instruction Manual.
However, the cord is bare, so that's my only complaint.
View detail
ParenthesisFocus on goodness
Parenthesis is good - Z ETA
Focus on appearance, maintenance up!
The Shift Pedal is now easier to adjust, and there is nothing to complain about.
View detail
Rear brake air Guide
The name of this item is Sprocket Cover, but the OEM part name is Rear brake Air Guide.
The function would be to cool the Rear brake.
I had to replace it because it was dirty and white and it didn't look good.
Front Fender was also changed to Carbon for better balance.
All that remains is to replace the Rear Fender.
The accuracy was poor for its high price, and installation required forceful hole alignment.
Also, the packaging was messy.
Washer is required to use the original Bolt as it is different thickness from OEM.
View detail
Installed on New Model GSX1300R HAYABUSA
Honestly, it's the look! But now I can clean it from the crevices.
It is a pity that Anodized has a very strong Orange color and WoodStock has a different color, but as a whole, it is a cohesive unit.
The work is done by simply removing the screws from the LeftUnder Cover and Side cowlCenter and lifting the nails.
View detail
Fits: HONDA CB1100, HONDA X4, HONDA LD 97-03, HONDA CB1300SUPERTouring, HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR
It's neither good nor bad
[How is it used?
No particular problem in use, but needs to be cleaned regularly because of grease etc. on the chain.
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy
How was your experience with it?
No problem
[Included Parts:were they on?
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
It was a good product that was well thought out, even down to the day-to-day care.
I replaced the Sprocket Cover that I had damaged due to my sad carelessness during a previous job. I chose this product simply because it was the least expensive among similar products.
Parts:POSH FaithSprocket Cover
When we checked the actual arrival of the product, we found that a solid Dust cover was also attached, which was a Large change pleasant miscalculation because it prevents the vehicle body from being soiled by the oil that splashes from the Sprocket.
The only thing I don't understand is that the shift pattern is not indicated, and the Instruction Manual states that the car will not pass inspection as is, but the original OEM Product also does not indicate the shift pattern. Does this mean that the OEM Product is being sold by the Manufacturer in a condition that will not pass vehicle inspections?
I don't know the details of the situation, but...
It did not appear to be listed anywhere.
I don't have enough small money to ask a dealer to inspect my car, and I don't want it to be a hassle later on, so I modified it a little to indicate the shift pattern.
The processing content of the notation is just pasting the letters "1N23456" with METAL's in lettering and pouring the transparent hardening resin from the top.
I will also include a photo for reference.
View detail
Drive cover
I removed the OEM drive cover from the plastic cover and reused the gold part. It looks parenthesis good! View detail
I was satisfied
I felt that the color was a little too dark.
I am very happy with the product.
After that, I feel it is expensive in terms of cost.
View detail
Very good, but it would be better...
This hollow front sprocket cover has a higher appearance than the original factory, and the condition of the front sprocket can be directly observed. It is simple to install and can be perfectly replaced in place. After talking about the advantages, let’s talk about the deficiencies. Because you can see the oil pollution of the front chainring more clearly, you have to have one more area that needs to be carefully cleaned every time you wash the car, and because it is hollowed out, it feels more susceptible to contamination. In addition, it would be great if the modified hollow sprocket cover can be designed to cover the exposed pipeline in the front... ------------------------------------ This hollow front toothboard cover is higher than the original value, and can directly observe the status of the front tooth, and the installation is simple and can be perfectly replaced. It is said that it is prone to the premium, and it will be more clear, because you can see the oil sewage of the front toothboard, so every time the car is carried, there is a need to carefully clean, but because it is hollow, it feels more easily contaminated · ························ ············································ View detail
All about decorativeness
It's completely decorative only Parts.
The area is large and the dress-up effect is high.
Anodized texture and molding is also good
The gold color is quite flashy, but since the OEM is ordinary resin, I think it is good to have a sense of luxury in other colors.
The color is similar to SNIPER's Gold, and compared to BABY FACE's Orange Gold, it is more Gold! It is a feeling. However, it is not enough to feel uncomfortable. Rather, the Frame hole is sandwiched between the BABY FACEfootpeg and the frame hole is bothered…
Weight:180g for OEM (including Chain Slider) It was 420g against. I think that the weight is not so bad, but I will remove the OEM Chain Slider, and I am a little concerned about whether it will affect me.
I have a k-factory shift spindle holder installed and there is no interference or other problems. Accuracy is good.
The price is quite high, but I think it is reasonable because the machining accuracy is good, the installation is fine, and the amount of material is high...
Luxury, or rather luxury Parts…….
View detail