Reviews
Fits: HONDA CB1100, HONDA X4, HONDA LD 97-03, HONDA CB1300SUPERTouring, HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR
Posh sprocket cover
The cover was delivered very well packaged,after unpacking it you could tell it was well made and good quality,fitting this item took 45mins from start to finish and it looks great View detail
Fits: HONDA GROM, HONDA Monkey125, HONDA DAX125, HONDA GROM
Accuracy!
The cutting accuracy of the parts is high, and bolt tightening is also excellent.
The Driven Sprocket of the GROM has little clearance with other parts, so it is necessary to work carefully so that the wounds do not stick to both the body and the parts.
Although we have not yet been able to verify the shift feel, we have seen an improvement in the firmness of the feel.
View detail
Fits: HONDA GROM, HONDA Monkey125, HONDA DAX125, HONDA GROM
It's so good ??
I replaced the G-Class Firmly, and it has improved the Mission entry to an unbelievable degree. View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1200S, KAWASAKI ZZR1100/ZX-11
The FrontSprocketッs easier to clean and has a better texture.
Cleaning around the front sprocket is easier and always cleanable.
Texture and Cost performance are good.
View detail
Fits: KAWASAKI ZEPHYR750
Fitted to match RearWheel inch up
Originally, we were thinking of TireInch Up and 520Conversion by replacing the Wheel, so we replaced the Sprocket Cover.
It is very light compared to the OEM SPA ROCKETCover.
In addition, unlike the Covers of other manufacturers, ZEPHYR's long Shift rod is stable and the Shift operation feels good because of the Shift Support.
The appearance is also very refreshing around the Cover and the body looks tighter.
As for the cost, the cover, bolt, etc. are all made by Anodized, so they are very expensive. However, considering the lightness, sturdiness, and effectiveness of Shift Support, it is worth considering.
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA DAX125, HONDA CT110 HUNTER CUB CT125, HONDA CT110 HUNTER CUB CT125
This is a great sprocket.
When replacing the small gear, I replaced it with a titanium bolt. The titanium bolt was not visible in the original cover, so I searched for several products. Among the sprocket covers, I chose this product because it made almost the entire small gear visible. I am very satisfied after trying it out myself. -------------------------------------------------- -------- We replaced it with a titanium bolt while replacing the small gear. The genuine cover was not visible, so I looked for several products, and I chose because this product could make it look almost all of the whole gear during the Sprokit cover. I'm so satisfied with it. Powered by Google Translator View detail
Fits: KTM 690 SMC R, KTM 690 Enduro R, HUSQVARNA 701 Supermoto, HUSQVARNA 701 Enduro
Cool
[How is it used?
Mainly Touring
Was the one you received as per Image?
Yes
Was the installation difficult?
Bolt is removed and replaced with OEM, so it's easy!
How was your experience with it?
It looks better.
[Included Parts:were they on?
Body only.
[Was there anything that disappointed you?
Nothing in particular
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SB
It is easy to install.
I'm not sure about the color!
The texture of the product and such is very good.
However, if the front sprocket is not OEM, the sound might be bothersome.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Archi front sprocket cover
About quality and texture Good quality in hard aluminum polished sliver. About the feeling of use Feels lighter then the stock cover. Easily access when cleaning and lubricanting the front sprocket. Difficulty of installation Easy to install. Less then 30 mins. Just get the correct screws to the correct position. When removing the gear adjuster remember to find the dot and place back to the same position. Cost performance and comparison with other products Cost around average compared with rest of the brands. But quality as maintained. About shipping and packaging Well package in box wrap with plastic bubble and paper. Any concerns, cautions, or advice when purchasing Just remember the original position of the gear shifter when installing it back. View detail
Looks awesome, and feel much safer going on long rides now
The holster protector looks sturdy and is an easy way to add some flair to the bike while providing excellent protection. It fits perfectly and is a high quality piece. I'm pretty sure if my chain breaks I won't have to worry about damaging the engine cover or the case. I've never broken a chain, but sticks, stones, and mud have done no harm to the guard. Yamaha's blue is like powder blue. Looks amazing with the gold chain too! I've done a lot of research and on every website I checked, most people were saying that the stock bolts would fit my bike. I even searched and asked a few websites and they all told me the stock bolts would fit. Don't listen to criticism. It finally came with the new bolts when it was delivered.the only downside is it's really expensive View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA DAX125, HONDA CT110 HUNTER CUB CT125, HONDA CT110 HUNTER CUB CT125
Sprocket cover installation
DAX125 has a lot of plating parts, and I was right in choosing Silver. View detail
Fits: KAWASAKI Ninja 150RR, KAWASAKI Ninja 150R, KAWASAKI Ninja 150RR, KAWASAKI Ninja 150R
BoltQuantity:Mounted with 2pcs.
It is easier to change the front sprocket, after running with a lot of chain oil, oil is flying all around. The look is different from the NORMAL by a large amount. View detail
Quality is good
I had been using inexpensive, good-looking clutch release covers from POSH, FAZE, etc., but the Type, which is installed by sandwiching all the plate covers between the collars, became rigid and insecure after long-term use, so I decided to replace it with this product.
The upper three parts are fixed with a combination of plates, so it is very rigid and has a cover to hide the speed sensor.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS Cafe
Color faded.
We wanted parts that could support the change shaft and increase precision, and we also wanted to improve the slightly awkward sprocket cover's parenthesis.
Design preferences are subjective, but I think this is the coolest Sprocket cover.
The assembly is a bit puzzle-based, and if you are not confident in your dexterity, it would be less frustrating if you prepare someone's third hand to work on it.
The Change Shaft Holder has a BearingMETAL, but the accuracy is not that great, so it is safer to think of it as a bonus.
The hidden wiring will be exposed, but as it is, it will look sloppy, so wrapping 6Φ Spiral Tube around it will actually protect the wiring and give it a bit of a Spartan look.
I have actually been using this product for 3 years now. I wiped it with Dustcloth sprayed with Parts cleaner to remove dirt and the color came off. （The color has been removed. (That is why the area around the landmark looks silverish.)
I had no choice but to Masking the bu Landmark's place and painted it with dyed Q.
You may want to wipe the dirt with neutral detergent etc. instead of Parts cleaner.
I personally gave it 4 stars for quality cosmetics because of the color fade and the accuracy of the Change Accent, but basically it is a good product with an overall rating of 5.
View detail
สินค้าสวยงาม จัดส่งรวดเร็ว View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SB
It looks great!
Dress-up effect is quite high and Parenthesis is good, but the Gold price is a bit high. I thought that the grease would scatter from the crevices, but personally I found it acceptable. View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SB
Parenthesis OK
Looks Parenthesis nice ??Chain lube is worried about flying. View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1200S, KAWASAKI ZZR1100/ZX-11
Wow that's cool
It looks cool and I am satisfied with the custom look and feel.
The installation was easy since it was a simple removal and replacement, but I heard that the piston would pop out, so I referred to the service manual and pushed the piston in, gripped the clutch lever, and secured it with a tie wrap.
Demerit is only concerned about dirt and rust because I can see places I couldn't see before. I will try to clean it frequently.
View detail
For Dress-up
Since the footpeg was also Babyface, I wanted to get the Sprocket Cover as well.
The installation is Bolt On, so if you float the Cowl a little, it is Large sturdy.
It is completely for dress-up purposes as there is almost no practical part.
View detail
Expensive, but great product
I this thing 5 stars, but I think it is too expensive. I really wanted a case saver with a cover though and this was my only option. Part looks great and is well made. No regrets, despite the high price Ordered this product to get rid of the factory cover that held mud and other debris inside, and to be able to easily inspect my front sprocket. Just the ease of maintenance/ inspection is a good reason to buy. On the other hand, totally cleans up the look at the bike, looks great. Works great, . Can't beat it View detail