Reviews
It is surprisingly noticeable when you put it on, which is good.
Used 4 pieces for Handlebar Clamp on XSR900.
The price is a little high, though, as it is a place that is always in view while driving, so it is highly satisfactory.
We were lucky to have a Gold similar to Fork.
M8 is with O-ring.
I found out when I put it on that I can see the silver color of the Bolt. I am satisfied with it because I can't see it while driving.
View detail
Looking for ways to use it.
I was going to use it for a Handlebar Clamp on my XSR900, but it was not available in this size, so I ended up buying it in vain.
I ended up buying M6, M8, and M10, all of which are of good quality and may not be as expensive as they should be.
I've seen some of these products not match the color when you buy them, but the gold of this series is similar to the gold of the XSR900's Fork.
M8 and M10 are O-rings. We will keep them until we can find a use for them.
View detail
It looks surprisingly different and good.
XSRLogoQuantity under XSR900 Meter:Pair (for Left and Right) Used for
The price is a little high, though, as it is a place that is always in view while driving, so it is highly satisfactory.
We were lucky to have a Gold similar to Fork.
M8 and M10 are O-ring, but M6 seems to be resin color.
View detail
Osha cosmetic lid
Osha's Cap that has been around for a long time.
[How is it used?
In Bolt's Cap on Silencer Bracket.
Was the one you received as per Image?
Image itself
Was the installation difficult?
It was so easy that I was surprised.
How was your experience with it?
It was great and Parenthesis is good.
[Included Parts:were they on?
It came with an outer bag.
[Was there anything that disappointed you?
None at all.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Cool!
I always buy CapBottle covers from you. View detail
One point
The price is a little high, but it stands out and is fashionable when worn.
It is a little loose, but with some ingenuity, it is not a problem.
View detail
Z900RS SE
Some parts can be removed quickly and others can't. A little expensive. View detail
For coloring around the Engine
Small but immeChainLarge Parts.
It is only a cap of M6 bolt, but I feel that the custom feeling will become even larger by setting several caps.
Gold tends to be too heavy, so I used it around the Engine area while racking my brains about this and that.
View detail
Cost-effectivenessOutclassing
We got this for the purpose of hiding the presence of Bolt, since there are many Red Mono Parts.
The problem with this type of small thing is that once you get into it, you lose the Drill. (Lol) 。
I'm sure it'll come off pretty easily." I thought it was a good idea, but it is fitted more firmly than I expected.
Just a Large size? Diameter? I felt that the NASA Type could hide the Bolt better.
View detail
For dress-up around Caliper
This is a Repeat item as I recently got into Cap Bolt Cover.
Gold is used as a color, but it would be too much like a "kudzu" if it is used all over the place, so red was chosen for this project.
It's just a Bolt cover, but it's a Bolt cover.
They say that just by fitting such a tiny object, the sense of custom increases.
However, I set the Caliper side to NASA Type, so it somehow failed. Crying 。
View detail
ImpactLarge, although not so subtle.
I ordered a Babyface Racing hook and a Silver cap bolt, which lacks a sense of unity.
Installation is done by "Giggle." It does not take much effort because all you have to do is push in the
Just be careful not to push too hard or it will float slightly.
Up close, it is obvious that Bolt is filling in the holes, but from the side, I think it gives a sense of Gold's cohesiveness. I think.
View detail
GOOD when combined with Cap Holder
I installed their Cap Holder and bought it to hide the Black Bolt head.
I was not sure about the other type, but this one is more integrated with the Holder in terms of design.
I'm not sure what to do with these items, but I'm afraid I'm going to run out of drills if I start obsessing about them. (Lol) 。
View detail
Rust prevention by preventing water accumulation in the recessed part of the bolt
[How is it used?
When it rains, water collects in the recess of the cap bolt, so I decided to cover it before it rusts.
Was the one you received as per Image?
It was just like Image.
Was the installation difficult?
Installation was super easy. I was rather careful to take it out of the package so as not to drop it.
I degreased the Bolt recess with Parts cleaner before installing it in the Bolt recess.
In order to prevent it from falling off, I applied a thin layer of Grip bond to the O-ring part of the shockproof Gel from DAYTONA that I happened to have.
How was your experience with it?
Works as per Image. It hasn't come off so far.
I chose the same black color as the Handlebar Post so it doesn't look out of place.
[Included Parts:were they on?
No. O-ring is already installed.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
It is better to degrease the recesses of the Point and hang/Bolt before installation to prevent them from falling off naturally.
Items to buy together/You don't need to buy it, but if you have Sealant or Liquid Gasket, you should apply it to the O-ring part and install it to prevent it from falling off naturally.
View detail
Glam up your Cap bolt
What made you decide to buy?
I purchased this product for the purpose of dress-up around OEMAttachment and Engine Guard.
How was your experience with it?
The appearance of the Engine area has changed a little. Probably, others will not notice if I don't tell them, but I am satisfied with myself.
This is the part you want to check before driving to make sure it won't come off due to vibration.
[Regarding installation]
Installation is easy, just insert it into the head of the Engine GuardMounting Bolt. However, when I bought it, it was difficult to insert into the Bolt, so I used a little silicon spray on the ORing and installed it.
View detail
I installed it to Bolt of Tandem Footpeg.
I bought this to give my tasteless Bolt head a little Custom.
Because it is a Black Bolt and a Black Cap, it is difficult to understand it when seen from others, but
He is satisfied with Large, so it is good.
View detail
For Dress-up
Suitable for Cap bolt in various places.
There is a stopper on the product so you don't have to worry about it coming off.
I wish it was a little cheaper…
View detail
Cap bolt Cover
The Wrench hole in the Cap bolt is bothering me so I installed it as well as the Dress-up.
The color is Black, so it looks nice and tight.
View detail
Bolt cover
Looks good to me.
But if you do one place, you might want to align other places too…
View detail
It's not the way it's supposed to be used, but …
When I recently replaced it with an Accossat Wire Clutch Holder
The wire and lever attachment point is a Pierced-type pivot pin
Wire's ThailandCo will be in full view
I was looking for something to block up
I think you could use Cap bolt's Cover and the Pin hole diameter
When I measured it, it was 8mm, so I bought a cover for 10mm
I put it on as soon as I saw it and it was Exactly
I bought the Silver, but there are many color variations
You may purchase one to match the color of the Lever
After that, it might come off due to vibrations, so I'll use a Rubber-type adhesive
I'm thinking of fixing it
View detail
It could be a little cheaper
I've bought them many times to cover the head of One Point and Bolt
It would be great if you could make it a little easier or increase the number for the same price
It's a tighter fit than you might think, and it won't be gone before you know it
I sometimes buy them because of price adjustments
View detail