Reviews
Illuminates cleanly and evenly
If you don't have License Plate Light, this is the only choice!
LED Tail lamps originally had a License Plate Light, but it was wiped out without our knowledge!
I was searching for a Webig to take measures against car inspections, and I found a wonderful product!
Prices are not as low as they could be, but someone is living off of this, so it can't be helped!
I am concerned about the durability, but it is a well-known manufacturer, so I guess it doesn't matter.
View detail
It can be easily put on anywhere!
[How is it used?
When I bought a new cbr600rr Fender, it did not have a License Plate Light, so I purchased this product which can be retrofitted.
Was the one you received as per Image?
As per Image
Was the installation difficult?
It was easy, you can see the installation video on YouTubeChannel, so if you follow the instructions, you should be good to go.
I installed a conversion coupler for Honda, but the License Plate Light did not work, so I used the one that comes with the coupler and interrupts the wiring. The reason why it did not work was that the fuse was out. You can either modify the coupler or use the included coupler, both of which are easy to install.
It attaches to the back of the Number with Double-sided Tape, so it is very easy to put on. It is also strong enough.
How was your experience with it?
The LEDs are very bright and well lit, and the fact that they are compact and not very noticeable is great.
[Included Parts:were they on?
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
License Plate Light
I bought this product because I needed a License Plate Light for a small custom job, and I think it is easy to install, but I think it is easy to break if you bump it a little bit. View detail
Small and shiny ones are good.
If there is such a Compact and Stylish one, I would buy it.
I made a bracket and attached it.
View detail
Bracket must be self-made
Bracketetetc. If you can DIY, you can put it on without any problem.
I bought this product because the Fender Eliminator was also self-made.
I am satisfied with the brightness.
View detail
bright
I use it for a position lamp and it is much brighter than the NORMAL lamp.
The white color is very bright and cool, and since it is LED, I think it is very durable.
View detail
Nice and bright
Hurricane have an excellent LED license plate light available right here. I have been using it for a few years now and the light produced from the five LEDs is perfect and matches the rest of the LED lighting on my Honda Monkey 125. Installation is very simple, all you need it a clean flat surface and the double sided tape on the back of the LED light does the rest, I was originally concerned the double sided tape would not last but has shown no signs of deteriorating out in the weather. Pricing looks to be fair for a LED light of this quality. View detail
very satisfied very very very
The light is quite bright.
The product is also of good quality and I am very satisfied.
It is very good when used together with TST fan-less products.
The TST product itself is very easy to use and feels like something delicately made.
very satisfied haha
Hahaha
haha
Hahaha ------------------------------------------------- --------- The light is quite bright.
The product is of good quality and I am very satisfied.
It is very good to use it together with the TST fenderless product.
The TST product itself is very easy to use and there is something delicate about it. The feeling of being made
very satisfied
View detail
![LED Number Plate Light [Blade License Plate LED Lamp]](https://img.webike-cdn.net/catalogue/images/40464/07290012_597b544c70c9e_TS.jpg)
bulb-out replacement
Cheap? Nice to look at?
I had no problem inspecting the car.
View detail
If you're looking for a compact license plate light, you've come to Recommendation
[How is it used?
As a replacement for the LED attached to KIJIMA fender less that was damaged by water after one run in the rain.
Was the one you received as per Image?
Compactness, texture, and coverage are all satisfactory.
Parenthesis is good for wing section shapes.
Was the installation difficult?
If you have made it to Fender Eliminator, Bolt On.
If you don't have it, Wiring process is required.
How was your experience with it?
I've run it in the rain a few times and it's in good shape.
[Included Parts:were they on?
License Plate co-tightening with Bracket.
[Was there anything that disappointed you?
I thought KOSOLogo was going to be lame, but I was pleasantly disappointed that it didn't stand out.
I bought it because I thought it would break soon anyway, but it's surprisingly long-lasting.
This is a Recommendation for those of you who are using a Fender Eliminator and a big License Plate Light and a GSX400E.
KOSO is hard to underestimate!
View detail
Ideal for position lamps
I am using this lamp in the position lamp of Scooter and it is very bright in comparison to the NORMAL. View detail
4.6
How we did it:We wanted the cars behind us to be able to recognize the Motorcycles, because it was too dark for OEMs.
Installation and Accuracy:It can be installed the same way as the OEM. Reverse of the removal order. Turn Right to lock after inserting the contacts.
Quality and texture:It is also properly coked. There is no miscellaneous taste.
Performance/Function:it's very bright compared to the OEM beanbags. You can see this by checking the Rear from the riding position.
Feeling:I've been using it for a year, exposed to the wind and rain, but there are no problems.
Cost performance:If you can buy safety and security at this price, it's very good.
Overall:I'm glad I bought it.
View detail
It was as expected.
I felt the OEM WedgeValve was not enough and replaced it
The installation is quite can tan and looks good, the LED light is parenthesis good
View detail
I matched the Headlight
I've made the Headlight a Sphere Light 4500K and I've got a T10 to go with it Quantity:Purchased in 1 Set of 2pcs
The Position light was bright enough and there was no color difference between it and the Headlight
The T10EX, which also has a light-emitting part on the side, may seem even brighter than the T10EX because the light-emitting part is only on the front It is not
This area may be a matter of conformity and preference
I replaced the License Plate Light at the same time, but it's moderately bright I'm glad I used the T10, which doesn't have direct light
However, it takes a lot of force to insert it into the Socket, so you have to be careful not to touch or damage the luminous part Be careful
View detail
bright
Number I installed a light, I am convinced. LED lighting is beautiful.
It's easy so you can install it in a matter of minutes. Please watch a video of Manufacturer.
I think this Manufacturer is no doubt.
View detail
Mounting with Fender Eliminator Kit
LED Lamp on the Fender Eliminator Kit was very poor so I purchased this additionally.
There is no hard work because the installation is only co-tightening with the License Plate and processing of the LEAD line.
View detail
It looks nice
Since I moved the Number position
I need it and I am relieved because it is a purchase Active product
With 4 LEDs, it seems that there is no problem photometrically
We have stocked Bolt balls of Number so we will light it together.
View detail
Easy to use for the first time in Small.
Along with Fender Eliminator, it turned on..
It seemed that the adhesive strength was weak in the attached Double-sided Tape, and it peeled off immediately when it stuck to the situation. Large seems to be durable on a flat surface.
Although I do not know about durability, I seem to have done Waterproof treatment for the time being, and it was on without problems even after the rainy day.
Light intensity is sufficient brightness to illuminate Number.
Cost performance is also nice and it is Recommendation because it does not bother with the installation place because it's Small..
View detail
![[Repair Parts] LED Lamp Body](https://global.webike-cdn.net/photo/impression/f2/f2e522d4eb306e8437b43bde84660090L.jpg)
LED power supply compatible with AC power supply License Plate Lamp
Purchased to install License Plate Light on KDX 200SR.
Following the adjustment of the angle angle and the installation of the Reflector, it is now possible to run completely with confidence.
【What made you decide the purchase?】
As we increased Headatt's Watt count, we decided to make LED light with low power consumption.
Normal LED light can not be used with KDX of AC power supply, but it is thought that it can be diverted if this product for AC power supply GROM can also be diverted.
【How was it actually used?】
Thickness was thin, and it was installed on the back of Tail cowl.
Installation is strong Magic tape + Tie Wrap Fixing glued with cemedine.
In the vicinity of Idling there is insufficient power generation amount to illuminate the whole number, but when I confirmed by having a friend run behind, I can see the number sufficiently with white light during driving.
【Was it difficult to install? (Hard parts case)】
Because it is a product for GROM, Wiring was short and could not be attached to KDX as it was.
For that reason Wiring was extended processing.
Other than that it was installed without problems.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Adhesive Tape is attached to the product, but it alone is uneasy with Off car with many vibrations.
Therefore, peel off adhesive, attach strong Magic tape to License Plate Light and car body with Cemedine and adhere it, and fixed it with Tie Wrap.
It runs over 1000 km including off-road, but it does not fall at all.
[Is there anything I was disappointed about?]
None
【Hope for Manufacturer - Please let me know if you have any improvement points]
It is better to reduce the power consumption.
【Have you compared items?】
None, I can not find any other LED corresponding to the AC License Plate Lamp.
[Others]
For now and so on etc. Although there is not, but this product diverts the commodity for GROM to the last, I think that complaints can not be said even if it breaks suddenly.
Anyway, it is now possible to run completely with peace of mind by attaching this product following adjustment of Number angle, Reflector, from the state of almost Number only state.
View detail
Expectation of lifetime
I changed all LEDs since I made all LEDs leaving the License Plate Light of the 90 year GSX-R 1100. I did not expect the brightness, but it is bright. I am looking forward to how much more. View detail