Reviews
Fits: HONDA Forza(MF10), SUZUKI ADDRESSV125, HONDA FORZA Z ABS, HONDA FORZA Z, HONDA FORZA Z, HONDA FORZA Z, HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA FORZA Z ABS, HONDA FORZA Z ABS, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
It is very good product of COSPA.
Put this item to cut the Rear Fender of Address and angle it to a near vertical number.
Is it because the vibration is Large in Single? Another Fender Eliminator is a strong Type that also fixes SIDE and more than double the price. Is that necessary?
Certainly, when running after installing, the number is fluttered, but if you prevent vibration from breaking out Number, you can either add Cushion between Number and Bracket or attach License Plate Holder
Is it okay.
There is no extra Bracket next to it, so I'm satisfied as I'm refreshing.
View detail
Pretty good
Installation was done at DIY. The manual is slightly unkind to the amateur. There is only OEM Parts and accuracy is good, car name Logo is included etc. etc. Quality is satisfactory. Angle adjustment of Plate mounting base is fixed so it can not be done. When I installed the License Plate directly, since the ground of Reverse side was exposed and it seemed poor, KIJIMALicense Plate Base (Black) We purchased separately purchased and installed it. Just this increased the texture considerably. View detail
Fits: HONDA Forza(MF10), SUZUKI ADDRESSV125, HONDA FORZA Z ABS, HONDA FORZA Z, HONDA FORZA Z, HONDA FORZA Z, HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA FORZA Z ABS, HONDA FORZA Z ABS, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
Moderate angle ◎
It is attached to the original maker Scooter but it is not warped and it has become a very good angle. Normally it is hard to see NORMAL. Although the finish is slightly sloppy but it is a part that can not be seen, there is no particular problem. View detail
Fits: HONDA DREAM50, HONDA ZOOMER, HONDA Byte, HONDA GORILLA, HONDA MONKEY, HONDA APE
Recommendation also like Cost!
I feel a little angle from NORMAL. It is Recommendation because it does not feel unsatisfactory and the atmosphere of the car body also changes. Installation was also easy. The atmosphere from behind will definitely change! View detail
Fits: HONDA Forza(MF10), SUZUKI ADDRESSV125, HONDA FORZA Z ABS, HONDA FORZA Z, HONDA FORZA Z, HONDA FORZA Z, HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA FORZA Z ABS, HONDA FORZA Z ABS, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
Nothing's backwards!
【What made you decide the purchase?】
It is decided that the comment of Impression and the height of evaluation
【How was it actually used?】
Certainly cheap and poor products are different in one taste and lid taste.
【Was it difficult to install? (Hard parts case)】
It was relatively simple as it removes the existing Number and tightens it together. Also handling Instruction Manual is described carefully so it is wonderful.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Do not over tighten Bolt kind, make sure that there is no loose after running.
[Is there anything I was disappointed about?]
This product is TAB screw at both ends, so you can install Nuts if you have one. In other words, since Ploy itself has Screw Mountain on both ends, it can not be used with PlateSingle Body.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I thought I wanted not to weld Screw Mountain.
【Have you compared items?】
License Plate Holder of POSH and so-called pushing raising
[Others]
I am using this product for reverse installation, because it is changing to POSH's Fender Eliminator Kit, the angle of Number is slightly rising so it was a little bit so it is for lowering the angle, please refer to the image. m (__) m
View detail
Fits: HONDA Forza(MF10), SUZUKI ADDRESSV125, HONDA FORZA Z ABS, HONDA FORZA Z, HONDA FORZA Z, HONDA FORZA Z, HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA FORZA Z ABS, HONDA FORZA Z ABS, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
Number Transfer
It is good to make it cheap and secure.
As the Number was moved to the back of the Backrest, due to Number which became too vertical mounting, the angle was adjusted with this product.
View detail
Used for Universal's Fender
I bought it because the hole fixing the License Plate to the Fender of Off-road motorcycle is not empty.
Besides DRC, there are products that fix License Plate with rough AndRoad, but we chose this because it is lightweight!
View detail
Fits: HONDA DREAM50, HONDA ZOOMER, HONDA Byte, HONDA GORILLA, HONDA MONKEY, HONDA APE
Commitment to invisible places
After installing Back fender stay, Fender and Number make contact and purchase as a countermeasure.
I also thought about Angle Change Type or Homebrew Bracket, but because it does not change the angle, it's more simple!
Where Laser is also hidden by Number, is Megukawa's commitment?
Both quality and number angle are satisfied
View detail
Fits: HONDA Forza(MF10), SUZUKI ADDRESSV125, HONDA FORZA Z ABS, HONDA FORZA Z, HONDA FORZA Z, HONDA FORZA Z, HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA FORZA Z ABS, HONDA FORZA Z ABS, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
We recommend you to use the home center's Universal stay
【What made you decide the purchase?】 Since the Fender EliminatorSet is not in CBR 250 RR, since I tried to cut OEMFender by myself and turn it into my own Fender Eliminator, since the angle of Number is overturned, I will sell Universal Bracket sold at home center and so on so that it is level with the Tail part of Seat Cowl Although I was thinking to use it by bending it seems weak, friends broke Bracket while traveling in that way Bracket broke and dropped Number So when I was looking for a strong Bracket I found DAYTONA 's Slant License Bracket so I bought it Saw.
【How was it actually used?】 I was worried how much the angle would rise, but I felt it was just too crowded, because it faced the tail cowl just in line with the angle of the original Fender, it's a very nice feeling. Unlike the Universal Bracket of the Home center, it's solid, so it's a bit heavy but it's sturdy and it does not seem to worry about breaking.
【Was it difficult to install? (Hard parts case)】 Bracket itself is easy because it is attached immediately without processing anything.
【Please tell me the point of installation and hang (in the case of Hard parts)】 It's very simple, so it's not particularly.
[Is there anything I was disappointed about?] I wanted to decorate Number Bolt to Bolt, but I am sorry just because I can only use the Bolt included.
【Hope for Manufacturer - Please tell me if there are any improvement points】 I'm happy if you can use decorative Bolt as I wrote above.
【Have you compared items?】 Home center's Universal Bracket
[Others] Although I was worried because there were few corresponding models, I could use it without problems for CBR 250 RR.
View detail
Fits: YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S
Exquisite angle
I caught OEMRear Fender and wore it when I made it to Fender Eliminator. The angle of Number has become exquisite and idealized. Making well, you can well fix Number and Reflector Bracket to Well. View detail
Fits: HONDA Forza(MF10), SUZUKI ADDRESSV125, HONDA FORZA Z ABS, HONDA FORZA Z, HONDA FORZA Z, HONDA FORZA Z, HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA FORZA Z ABS, HONDA FORZA Z ABS, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
Angle adjustment of License Plate
Although it is for Address, I used it for angle adjustment of MONKEY.
Merit is few as it is broken or ugly if you adjust the angle with Bracket selling in Homsen etc. However,
This product is made durable and can be used with confidence.
Do not bounce up the angle like Mischief,
I am very happy with the feeling that it is slightly rising.
I do not know unless it is diverted,
When attached with Match, satisfaction is also Large (Lol)
Just until now Number has stopped with Taper bolt and I made it to Fashion with Bolt cap,
This does not use Bolt, but it makes me feel like Bolt to stay with Cap Nut.
It is not good that it becomes uneasy or uneasy due to vibration etc. Fashion difference disappears.
So I cut one ☆.
If you only mention saying that you attach an angle to Number, it is an undisputed Parts.
View detail
Fits: HONDA Forza(MF10), SUZUKI ADDRESSV125, HONDA FORZA Z ABS, HONDA FORZA Z, HONDA FORZA Z, HONDA FORZA Z, HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA FORZA Z ABS, HONDA FORZA Z ABS, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
Cheap and easy
Cut Normal fender and attach it, it seems to have not bought a Fender Eliminator Kit.
However, if you attach it to a vehicle already equipped with the Fender Eliminator Kit, it will be too angled and will violate safety standards.
I think that it is cheaper and easier and better than making your own Bracket.
View detail
Stainless Steel has thickness and is firm
I installed it in KSR 110. Stainless Steel has thickness and is firm. In order to avoid interference with the Tail lamp, I grinded the Center part of this Bracket with a little Grinder. View detail
Fits: YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S
Gentle angle adjustment can be performed and it is very satisfactory.I think that appearance from width may also be felt refreshed.angle attachment nonchalant on the Scooter -- carrying out -- recommendation.
Gentle angle adjustment can be performed and it is very satisfactory.I think that appearance from
width may also be felt refreshed.angle attachment nonchalant on the
Scooter -- carrying out -- recommendation.
View detail
Fits: HONDA Forza(MF10), SUZUKI ADDRESSV125, HONDA FORZA Z ABS, HONDA FORZA Z, HONDA FORZA Z, HONDA FORZA Z, HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA FORZA Z ABS, HONDA FORZA Z ABS, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
Although it thought that only mere a few would change the Plate angle of an external Fender less kit and being purchased, As the picture, it went up too much and gave up attachment (^^; Although I who neglected the check of the angle am bad, it is cheape
Although it thought that only mere a few would change the Plate angle of an external Fender less kit and being purchased,
As the picture, it went up too much and gave up attachment (^^; Although I who neglected the check of the angle am bad, it is cheaper than carrying out strongly as a product and carrying out its original work processing of the commercial Stay, and structure is also far good.
There should just be several kinds and a thing with a shallower angle.
It will give to a friend here.
View detail
Fits: YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S
It is the completion of a Dress-up up only at attaching. There is also intensity and a Cost performance is also good. An angle is also exactly good touch. Although there is also a product of other company, the direction of the goods here wins b
It is the completion of a Dress-up up only at attaching.
There is also
intensity and a Cost performance is also good.
An angle is also exactly good touch.
Although there is also a product of
other company, the direction of the goods here wins by a low price.
View detail
Fits: YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S
It attached to VF750F. It becomes such an angle. I compare pure and think that a Parenthesis is good. The Image after attachment was floated and purchased on the occasion of purchase. It is an exactly good angle as an Image. The Nu
It attached to VF750F.
It becomes such an angle.
I compare pure and think that a Parenthesis is good.
The Image after attachment was floated and purchased on the occasion of
purchase.
It is an exactly good angle as an Image.
The Number light made from an Active (LED-izing) and the Reflector are also exchanged simultaneously.
Although the
maker is different, it thinks that it is congenial.
It is performance ? which also uses the mounting hole of the
Original well and whose conviction is possible.
I think that it may compare that it is pure or you may feel it refreshed.
View detail
Fits: HONDA Forza(MF10), SUZUKI ADDRESSV125, HONDA FORZA Z ABS, HONDA FORZA Z, HONDA FORZA Z, HONDA FORZA Z, HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA FORZA Z ABS, HONDA FORZA Z ABS, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
having made goods of this sort on one's own, if it was before, but becoming cunning completely -- stripes -- although there were also things, since structure of such goods was good and sold to the Reasonable recently, it came to purchase only ready-made a
having made goods of this sort on one's own, if it was before, but becoming cunning completely -- stripes -- although there were also things, since structure of such goods was good and sold to the Reasonable recently, it came to purchase only ready-made articles.
Structure is also good considering the
price and the angle of a Slant is also moderate.
View detail
Fits: HONDA Forza(MF10), SUZUKI ADDRESSV125, HONDA FORZA Z ABS, HONDA FORZA Z, HONDA FORZA Z, HONDA FORZA Z, HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA FORZA Z ABS, HONDA FORZA Z ABS, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
Fairly inexpensive, since it is cheap. Two Bolt nuts removed attachment by the super-can Tan, and since it was attachment, it was immediately finished with the Number hole of the pure Fender. The angle is also moderate and affinity w
Fairly inexpensive, since it is cheap.
Two Bolt nuts removed
attachment by the super-can Tan, and since it was attachment, it was immediately finished with the Number hole of the pure Fender.
The
angle is also moderate and affinity with a Fender less is also a cinch.
View detail
Fits: HONDA DREAM50, HONDA ZOOMER, HONDA Byte, HONDA GORILLA, HONDA MONKEY, HONDA APE
It is as a picture and is the best for attaching an angle to a Number plate. if not solid in the check of the angle since angle adjustment cannot be performed -- -- a regrettable result is brought.
It is as a picture and is the best for attaching an angle to a Number plate.
if not solid in the check of the angle since
angle adjustment cannot be performed --
-- a regrettable result is brought.
View detail