Reviews
scratch-resistant
I will put it on the area where it rubs. I hope it will be effective. View detail
For Tank Protection
I put it on the perimeter surfaces of Tank and Seat.
This is to prevent the paint from peeling off the tank as the Seat rubs against the tank after a long ride.
Apply diluted soapy water on the Tank before applying it to prevent wrinkling.
View detail
To prevent scratches
My commuter CUB has a white undercarriage, and before I knew it, it was covered in scratches and dirt from getting in and out of the car (tears).
It's been six months since I started riding, and I'm still looking for items to prevent scratches and stains, and I found this Film.
Quantity:I cut the 1pc. seat into three pieces, one for the main foot, one for the side of the Shift Pedal, and one for the bottom of the keyhole.
It's not impossible to do it by yourself, but it was smoother to do it with two people.
The surface to be applied is slightly curved, so one person should hold the edge of the seat while the other person pulls it to get a good fit.
If you make a mistake, you can reapply. Even if bubbles appear, they will disappear if you press down while stretching the top with a towel.
All in all, I think it's an easy Film to use, even for a beginner or a bit of a klutz!
I've been using it for about a month now, and it hasn't come off or anything.
I'm glad I bought this product because it doesn't make the area where I put it look bad.
View detail
for peace of mind
I bought this to prevent scratches on the body when loading luggage. I don't want to scratch it unnecessarily, but I also don't want to throw away the feeling that it is used moderately, and honestly, I feel that I could have done without it. View detail
It is effective in preventing damage.
There are various types of Tank Pads, but if you stick a Tank Pad on it, it will destroy the design of the Tank, and if you prefer not to stick anything on it, I recommend you to stick it on.
Transparent [Color] The clear film is inconspicuous and scratch resistant.
View detail
Good for protecting, but too thick?
I bought it to prevent chafing.
Cut and paste it with scissors, but because it is quite thick film, it peels off when you paste it on a curved surface.
In terms of thickness, it seems to be quite strong against rubbing, etc.
I think it is suitable for use in the chafing of the strings when the SeatBack is installed.
In terms of quantity, the size is enough to cover the required portion of 1 Set for 1 Vehicle.
I'm giving it this rating because it's not very convenient to use because it just comes off.
I think it could be a little thinner.
View detail
To prevent SmallWound
I bought it thought that I could reduce the scratches on FFork Cramp received from Stack Belt 's gold tool as much as possible.
At the time of the former rider WR 250 R, we did not use the protection sheet.
A half to a year after attaching the Stack Belt, when removing Belt, the mark of Belt's gold rubbed on the surface of the clamp remained firmly.
This Seat has thickness 0. It is as thin as 2 mm, so you can easily cut it with Scissors or Cutter.
Of course, it was able to stick firmly to a cylindrical part as well as FFork.
* Though it is thin, I think that it is pretty millet to stick it cleanly to a 3 dimensional curved surface.
Because it is thin, it has no effect of preventing scratches and because it sticks to a curved surface "Peeling" I was worried about, but I have put Seat on the motorcycle I am riding for about two months but there is no sign that it seems to be torn or peeled at the moment ♪
I think that the water of the high pressure washing machine is striking directly during car wash, but for now it is no problem.
I'd like to ride in tune and use it for other places.
View detail
Small can not paste on curved surfaces, contracts, changes to Yellow
When I came out, I used it for about 20 years ago.
It's not that strong, but it's thick enough
It protects us.
Some scratches return because there is also restorability.
It's a nice product, but it's hard to paste on curved surfaces.
It seems that Helmet is the limit.
After pasting, 0. Because it shrinks by about 5%, weak painting
It can not be used for the face. I wish OEM paint,
I avoided it when used on my painted surface with LacquerSpray
Maybe better. Paint the painted surface and paint to Wrinkle
Become.
Also, Yellow Balan in Seal itself (Yellow change) Comes out so that it is white
I do not recommend to paste it.
Only 3 points are OK..
View detail
It purchased to abrasion prevention of the Tail cowl at the time of attaching a Side bag. It can remove, even if attachment goes wrong, and it can stick again. However, if I think that it is limited and it removes repeatedly, it is washable by
It purchased to abrasion prevention of the Tail cowl at the time of attaching a Side bag.
It can remove, even if
attachment goes wrong, and it can stick again.
However, if I think that it is limited and it removes repeatedly, it is washable by a Parts cleaner etc., but since the
fingerprint and a Garbage stick and it becomes dirty, they are cautions to think appearance as important.
View detail
"As a protection film, thickness is a good touch. I cannot say anything about durability since it has just attached, but it seems it costs a little.I think that it is good for protecting a car from a small crack."
"As a protection film, thickness is a good touch. I cannot say anything about durability since it has just attached, but it seems it costs a little.I think that it is good for protecting a car from a small crack." View detail
He bought it for crack prevention of a tank. Since it is extended well than expected, it is good for a curved surface, but since it is extended too much, even if it takes the paper pattern of a part beforehand stuck on the contrary on an end with what
He bought it for crack prevention of a tank.
Since it is extended well than expected, it is good for a curved surface, but since it is extended too much, even if it takes the paper pattern of a part beforehand stuck on the contrary on an end with what can tend to do wrinkles, the passage cannot stick.
I think or, if it is easy to stick whether thickness is given and the harder one to a slight degree, and air cannot enter easily when sticking.
You have to stick little by little carefully, so that area is large.
A result is highly transparent, and as wax was applied, in order that gloss may come out, it is beautiful.
Moreover, a grip changes well.
Synthetically, is it common if the ease of sticking, a result, etc. are seen?
It will be perfect if it is easy to stick to a slight degree.
Appearance is not bad if it is only considered as crack prevention.
View detail