Reviews
There is no correct way to cut.
I bought a second one and tried many different Cutters, but Scissors
I found it to be the best. If you are dexterous, you can use Cutter, Cut
I am clumsy, so I made a protective film for the SeatBack with a commercially available product. It is better to have a paper pattern, though.
View detail
It was 3M.
I bought this film to protect the SeatBack of my CBR1000RR-R. Unlike the OEM film, it is easy to cut and good for cowl.
Hard to blend in and become Wrinkle.
View detail
I love using it. Definitely a great product that I can recommend.
I have been using it since my previous Motorcycle, and now I have changed to a new one. The purpose is to prevent rubbing when using Side Back.
I think it used to be thicker Seat.... My memory is a little fuzzy.
It was much easier to use because it was thinner in my hand than I remembered.
The description of the product is Strong adhesion but it's not like it won't come off once it's attached. "Detachable." This is a Type that can be used to
By the way, the reverse side can be recovered to some extent by washing it with a neutral detergent.
Rather, it is this ability to attach and detach The best." and can be detached when needed and when not.
When I didn't need it, for example, I would stick it on the door of my Shoes box or on a smooth surface.
The use is pretty much infinite Large, as shown in the second image.
Seat itself is not very elastic, so three-dimensional curved surfaces should be viewed as almost impossible. It is necessary to devise a way, such as giving up on a clean installation or making a good cut to let it escape.
It contains 3 sheets of 30×25cm, so it is about 3 sheets of A4 size. So, I think you can keep 2 sheets as a spare if you have a certain level of anti-scratch level.
I think it is OK to replace them more and more as they gradually become yellowish due to ultraviolet rays.
OneQuantity for TouringRider:You will not lose anything by purchasing Set! No regrets! Treat before the scratches show the substrate!
View detail
taut
I was looking for something that wouldn't ruin the design of the Tank and I found this. I was looking for something that would not spoil the design of the tank and I found this. View detail
Is good
It is affixed where the Fuel Tank and Seat interfere with each other.
[Color] The tape is clear and transparent, so it is not noticeable and protects the painted surface.
Seal is easy to apply to curved surfaces and effective in preventing scratches.
View detail
Expectations for effectiveness.
I painted a tank and added a stripe on the cutting sheet to protect the area around the ferrule cap. It is very soft, so it is difficult to apply, but if you apply it with water, you can position it relatively easily.
I checked the adhesive strength with a scrap piece of wood, and it was quite strong and did not leave any marks when peeled off.
You can put it near the Key cylinder.
View detail
Flexible and easy to apply
The rope inevitably comes into contact with the Cowletc. when the Bag is strapped to the Seat when camping touring, and abrasions are attached. Although the contact part with the Cowl was cured with the curing tape every time until now, when the tape was peeled off, even the paint was peeled off together. I thought that this was not good, and this time I cured the Cowl with this product. Because it is a product of the purpose of course, the appearance was also neat, and it was able to achieve the purpose. However, I think that the price can be a little cheaper. I used this product on a previous Motorcycle at Repeat, and even after 10 years, it has not yellowed or hardened, depending on storage conditions. View detail
Stretchy and easy to apply
Because I put the Side Back on WR250R, I put it on the ZERO-GSide cover
Side cover for construction curing Tape first, and then the pattern production in Magic from that
Cut the curing Tape off well, sticking it to Protection film as it is
Although it is water-based, it stretches very well and can be applied beautifully even on curved surfaces
However, ZERO-G is matte finish, so you can understand that the place where you put it on will be Luster But..
A matted Film would be great too
It is very easy to fit on a curved surface and is recommended to stick it before it gets scratched
We'll see how durable it is, but if it gets damaged, we'll reapply it again
View detail
Very Easy to stick and stretch
This one is just perfect for the tank. I think it's because it's made by 3M. The glue is easy to stick and the material is easily stretched over curved areas and as soon as it dries, it doesn't peel around the edges. I will buy again for sure. View detail
Standard product
From old days this product is a classic one.
Single seat cover We used Cut finely to the part where the Cover and Seat of the attachment part make contact.
Scratch prevention effect is high, durability is also perfect.
View detail
High protection seal
Sprinkle the water diluted with the dishwasher like when sticking the sticker as written by others, sprinkler etc. You can stick it gently by pushing out air and water cleanly View detail
Can be used for anything
I bought it to protect various parts of Motorcycle from scratches etc..
The purpose is to protect from scratches attached to Tank, but it was used to protect scratches attached to Body from various Cable and Wire handling. In addition, Bag was attached to the upper part of Front fender and Rear side, and it protected from Body's scratch coming from shake of Bag. It can be used to protect all scratches.
I also own a bicycle. I also use it to protect scratches due to wire rubbing on my bicycle.
View detail
It grows unexpectedly, but I thought it was Decal tension and prepared preparation.
This is Decal rather than Scratch Prevention Seat.
It is better to form a mold firmly and dilute detergent Spray with Dryer water, prepare brushy items and go out.
Prepare to apply on third-order curved surfaces still more.
Or, impossible without Dryer (To paste cleanly)
Degreasing is also necessary.
That's why it's very good as a product, but if you set it up properly, it will be the best finish
By the way, it is unsuitable for places where you can scrape violently.
View detail
[ -- the webike Monitor ] -- since it is still a new car, it has stuck on the place where a crack is anxious. It can be used freely. It is recommended.
[ -- the webike Monitor ]
-- since it is still a new car, it has stuck on the place where a crack is anxious.
It can be used freely.
It is recommended.
View detail
Stick to the tank of GPZ900R. Although a hang goes into attachment, it is dramatically satisfied with natural touch of the result. Unless it approaches, it is not known that it is attached.
Stick to the tank of GPZ900R.
Although a hang goes into attachment, it is dramatically satisfied with natural touch of the result.
Unless it approaches, it is not known that it is attached.
View detail
At the time of new car purchase, it purchased for crack prevention of sheathing. Although stuck on the side of the tank, it is connected with UP of a knee grip, and it is quite d (-_^) It is good!!. Since Ella of the rear cowl had stretched, when
At the time of new car purchase, it purchased for crack prevention of sheathing.
Although stuck on the side of the tank, it is connected with UP of a knee grip, and it is quite d (-_^) It is good!!.
Since Ella of the rear cowl had stretched, when it stopped to a parking area etc., it stuck also on the outside of the rear cowl so that it might not get damaged.
Since a crack to the extent that it is very well thick and hit just for a moment is prevented enough, it is satisfactory.
View detail