Reviews
A4 Size is good.
Size is A4, so it is easy to handle.
The fact that it is not in a volume is good because it can be handled without Habit being attached.
View detail
cut out and use
Cut out and affix to the area of interest in Motorcycle. View detail
Good
I bought a new Motorcycle and bought this to prevent Tank from getting scratched.
It was a little difficult to cut when cutting with Scissors, but I was able to attach it successfully.
It is difficult to completely remove air bubbles, but I didn't mind because it prevents scratching. The size is smaller than I expected and the price is a little high, but I am satisfied with it.
View detail
There is also some gripe feeling.
Recently, SmallWound has become prominent on Tank!
I told myself not to worry about it because it was a training machine and I used it heavily, but I found an outlet product and stuck it on for prevention& protection.
The result was a Large success. The cut was quite precise, and by carefully removing air bubbles while adjusting the cut, I was able to achieve a generally clean finish.
Although it is not a GripType, it seems to have a non-slip effect and has some grippy feeling.
The work is to clean the surface thoroughly with Seat for removing oil from the attached kit, and then apply a liquid detergent diluted in the same way as for WindowFilm. (Container is also included.) Spray generously on the paste surface and Film and adjust the position.
The included spatula for pasting is just the right size and easy to use, but it seems to have two sides, so if you make a mistake, a wound will remain as shown in the image. (It is hard to see due to the reflection.)
Because of the complex shape of Z, we divided it into parts and removed air bubbles from the center outward.
To be sure, I left it for a day after the water dried to check the adhesion and took it for a test drive. There were no parts that were about to peel off, and the adhesion was firm, so there was probably no need to worry.
If it can be applied neatly, it will look good, and even slippery materials such as synthetic fibers can be used to hold the tank in place. (Not compared to GripType...)
The instruction manual is not included in the package, so please check the manual before preparation, and be prepared to work carefully and sparingly.
View detail
Fit for purpose
I chose the clear film despite being put on a black tank. The manufacturer claims the pads will take on a slight blue colour against black background.. but it's not really noticeable for me. It did take a bit of effort to push the majority of air bubbles out during installation. The colour block on the tank is still nicely visible, so that's a bonus. Make sure you know where your knees tend to sit & move on the tank before fitting the pads & allow this to guide your fitting location on the tank. View detail
High grip tires scatter stones.
CBR1000RR-R stepping stones as Cowl goes Wound
I put this product on it. It was Large strange to mold it.
I struggled. I managed to put it up, but my clumsiness made it difficult.
It suffered and looked considerably worse.
Large areas were better to be put up in sections.
The Curve surface was also watered with a misting spray, but Beauty
Cannot be done. Areas with a small area are finished well.
I did.
View detail
Before you damage your new car…
The New Model CROSSCUB110 that I had ordered was finally delivered the other day. I immediately read the various impressions of the senior CUB owners and found that the main pipeCenter cover is easily damaged by foot contact when riding, so I purchased this film to protect my feet while the car is still new. I bought this film to protect my feet while the car was new. Once I removed the main pipeCenter cover, I cut the film to fit the shape, and put it back on the body again. The rest of the cut film was used for the area I wanted to cover on the side of the center cover. View detail
Wound measures for side bag mounting
It's not a special feature, but if it's a loose curved surface, Seat will extend and follow it. 。 However, because I got the point at the last minute, Wrinkle entered in the middle! 。 When it deteriorates, I will buy the same one again. View detail
Protection.
I bought this to prevent scratches on my Tank.
Good abrasion resistance, good price and good as a protective Seal.
It also seems to be good for other parts of the body, so I put it on the parts I want to prevent scratches.
View detail
To prevent scratches.
I bought this to prevent scratches on the area where the Fuel Tank and Seat meet. If you put it on a new car, it will prevent the seat from rubbing by removing and riding, so it is Recommendation. View detail
It is effective in protecting the painted surface.
I'm sticking it where the Fuel Tank and Seat are interfering with each other. [Color] This is a clear, transparent tape that doesn't feel like it's being used and protects the painted surface. The seal is easy to apply to curved surfaces and is very effective in preventing scratches. View detail
Good product
This is a great product for the protection of the tank and Seat Cowl. It's a thin and soft material and can be attached to a bent area by heating it up. I'm not sure if this is the right product for you. I think it's a good thing that you can cut it into any shape or large size. View detail
The curved surfaces are difficult and take some getting used to.
I bought it because I wanted to protect my tank from scratches without compromising the OEM style.
Greedily "Quantity:Let's put it nicely in 1pc. I thought it was a bad idea and failed to paste it.
The curved surfaces seem to take some getting used to and hang.
(If you search the web. while wetting it with misting. . etc.)
I couldn't reapply it, so the failed Seal was wasted.
Did you learn a lesson the second time around? Without being greedy, I divided Seal into several pieces and applied it successfully.
If you put it on, it won't be so obvious, and Seal is thick enough that it's not too thick.
It's good for protecting you from scratches.
View detail
Expected
It is used for Helmet, not MotorcycleBody.
When using the Helmet Lock, I was worried about the scratches on the part of the body where the Helmet meets the body, so I used it to protect that part.
So far, it's not peeling or tearing and it's protecting me properly.
Large Satisfied
View detail
It's hard to stick it on
If you put it on Tank Bag, Seat Bag, etc., where it will rub against the exterior, it will be very effective in removing scratches It can be prevented
This product is a non-removable type
It is obvious that the exterior itself will not be scratched, but the Seal itself is also scratched due to its soft material It doesn't stick to the surface Therefore, it does not look bad after being attached
I use it for the part of the Side bag where the String and the exterior come in contact with each other
The downside is that it's difficult to put up
1.It is necessary to cut them into appropriate shapes beforehand
2.There's no trick to get the air out, so a spatula and water diluted with mild detergent won't trap air bubbles You need to put it up like that
If you are a first time user, I think it's good to be practiced with Small Size for failure
View detail
Fits: HONDA CBR650R, HONDA CBR650F
For prevention of skipping stones, etc
If you look at other people's imprints, it's hard to work with the Squeegee on this product, and it's more solid separately I bought Squeegee on amazon because I was told that the Squeegee that I did would help me work better I did
The work requires removing the entire cowl, so it has to be during a long holiday period like the GW or Obon holidays Is it too tight? Also, the Service Manual is a great help in removing the cowl
View detail
Good things but pricey
YZF-R1M I bought it for 2018 MODEL.
Since webike did not have R1M, purchase for ordinary R1.
M and normal R1 did not notice that the shape of Film is different.
Content is Film, Liquid, Squeegee is Quantity : Set, but it is difficult with the attached Squeegee.
I used a Squeegee with a felt.
Using the supplied liquid, if you do not mistake the procedure itself is not difficult.
You can start again if Film somewhat gaps.
However, if you cut Film, there is no spare, so you need to be careful.
View detail
I think that it is a good product.
When stretched and pasted, because there are linear marks in it, split into Small pretenses - Cut and think that it is better to stick it without stretching.
I failed once and I was able to successfully paste it for the second time.
View detail
Purchase
I purchased this DAYTONADAYTONA High protection seal for Side cover and Frame's Wound prevention. At first it was difficult to stick it well but the second time it was possible to stick it well. Because it is a transparent type, it is hardly noticeable. View detail
When pasting on a curved surface
We recommend that you warm while wearing it on a curved surface.
I myself did not do it for putting it in an unobtrusive place, but please be careful of nervous one
View detail