Reviews
Good
I bought a new Motorcycle and bought this to prevent Tank from getting scratched.
It was a little difficult to cut when cutting with Scissors, but I was able to attach it successfully.
It is difficult to completely remove air bubbles, but I didn't mind because it prevents scratching. The size is smaller than I expected and the price is a little high, but I am satisfied with it.
View detail
Is good
It is affixed where the Fuel Tank and Seat interfere with each other.
[Color] The tape is clear and transparent, so it is not noticeable and protects the painted surface.
Seal is easy to apply to curved surfaces and effective in preventing scratches.
View detail
Wound measures for side bag mounting
It's not a special feature, but if it's a loose curved surface, Seat will extend and follow it. 。 However, because I got the point at the last minute, Wrinkle entered in the middle! 。 When it deteriorates, I will buy the same one again. View detail
Protection.
I bought this to prevent scratches on my Tank.
Good abrasion resistance, good price and good as a protective Seal.
It also seems to be good for other parts of the body, so I put it on the parts I want to prevent scratches.
View detail
To prevent scratches.
I bought this to prevent scratches on the area where the Fuel Tank and Seat meet. If you put it on a new car, it will prevent the seat from rubbing by removing and riding, so it is Recommendation. View detail
It is effective in protecting the painted surface.
I'm sticking it where the Fuel Tank and Seat are interfering with each other. [Color] This is a clear, transparent tape that doesn't feel like it's being used and protects the painted surface. The seal is easy to apply to curved surfaces and is very effective in preventing scratches. View detail
The curved surfaces are difficult and take some getting used to.
I bought it because I wanted to protect my tank from scratches without compromising the OEM style.
Greedily "Quantity:Let's put it nicely in 1pc. I thought it was a bad idea and failed to paste it.
The curved surfaces seem to take some getting used to and hang.
(If you search the web. while wetting it with misting. . etc.)
I couldn't reapply it, so the failed Seal was wasted.
Did you learn a lesson the second time around? Without being greedy, I divided Seal into several pieces and applied it successfully.
If you put it on, it won't be so obvious, and Seal is thick enough that it's not too thick.
It's good for protecting you from scratches.
View detail
Expected
It is used for Helmet, not MotorcycleBody.
When using the Helmet Lock, I was worried about the scratches on the part of the body where the Helmet meets the body, so I used it to protect that part.
So far, it's not peeling or tearing and it's protecting me properly.
Large Satisfied
View detail
It's hard to stick it on
If you put it on Tank Bag, Seat Bag, etc., where it will rub against the exterior, it will be very effective in removing scratches It can be prevented
This product is a non-removable type
It is obvious that the exterior itself will not be scratched, but the Seal itself is also scratched due to its soft material It doesn't stick to the surface Therefore, it does not look bad after being attached
I use it for the part of the Side bag where the String and the exterior come in contact with each other
The downside is that it's difficult to put up
1.It is necessary to cut them into appropriate shapes beforehand
2.There's no trick to get the air out, so a spatula and water diluted with mild detergent won't trap air bubbles You need to put it up like that
If you are a first time user, I think it's good to be practiced with Small Size for failure
View detail
I think that it is a good product.
When stretched and pasted, because there are linear marks in it, split into Small pretenses - Cut and think that it is better to stick it without stretching.
I failed once and I was able to successfully paste it for the second time.
View detail
Very Easy to stick and stretch
This one is just perfect for the tank. I think it's because it's made by 3M. The glue is easy to stick and the material is easily stretched over curved areas and as soon as it dries, it doesn't peel around the edges. I will buy again for sure. View detail
High protection seal
Sprinkle the water diluted with the dishwasher like when sticking the sticker as written by others, sprinkler etc. You can stick it gently by pushing out air and water cleanly View detail
Purchase
I purchased this DAYTONADAYTONA High protection seal for Side cover and Frame's Wound prevention. At first it was difficult to stick it well but the second time it was possible to stick it well. Because it is a transparent type, it is hardly noticeable. View detail
To prevent SmallWound
I bought it thought that I could reduce the scratches on FFork Cramp received from Stack Belt 's gold tool as much as possible.
At the time of the former rider WR 250 R, we did not use the protection sheet.
A half to a year after attaching the Stack Belt, when removing Belt, the mark of Belt's gold rubbed on the surface of the clamp remained firmly.
This Seat has thickness 0. It is as thin as 2 mm, so you can easily cut it with Scissors or Cutter.
Of course, it was able to stick firmly to a cylindrical part as well as FFork.
* Though it is thin, I think that it is pretty millet to stick it cleanly to a 3 dimensional curved surface.
Because it is thin, it has no effect of preventing scratches and because it sticks to a curved surface "Peeling" I was worried about, but I have put Seat on the motorcycle I am riding for about two months but there is no sign that it seems to be torn or peeled at the moment ♪
I think that the water of the high pressure washing machine is striking directly during car wash, but for now it is no problem.
I'd like to ride in tune and use it for other places.
View detail
Small can not paste on curved surfaces, contracts, changes to Yellow
When I came out, I used it for about 20 years ago.
It's not that strong, but it's thick enough
It protects us.
Some scratches return because there is also restorability.
It's a nice product, but it's hard to paste on curved surfaces.
It seems that Helmet is the limit.
After pasting, 0. Because it shrinks by about 5%, weak painting
It can not be used for the face. I wish OEM paint,
I avoided it when used on my painted surface with LacquerSpray
Maybe better. Paint the painted surface and paint to Wrinkle
Become.
Also, Yellow Balan in Seal itself (Yellow change) Comes out so that it is white
I do not recommend to paste it.
Only 3 points are OK..
View detail
When pasting on a curved surface
We recommend that you warm while wearing it on a curved surface.
I myself did not do it for putting it in an unobtrusive place, but please be careful of nervous one
View detail
Can be used for anything
I bought it to protect various parts of Motorcycle from scratches etc..
The purpose is to protect from scratches attached to Tank, but it was used to protect scratches attached to Body from various Cable and Wire handling. In addition, Bag was attached to the upper part of Front fender and Rear side, and it protected from Body's scratch coming from shake of Bag. It can be used to protect all scratches.
I also own a bicycle. I also use it to protect scratches due to wire rubbing on my bicycle.
View detail
It grows unexpectedly, but I thought it was Decal tension and prepared preparation.
This is Decal rather than Scratch Prevention Seat.
It is better to form a mold firmly and dilute detergent Spray with Dryer water, prepare brushy items and go out.
Prepare to apply on third-order curved surfaces still more.
Or, impossible without Dryer (To paste cleanly)
Degreasing is also necessary.
That's why it's very good as a product, but if you set it up properly, it will be the best finish
By the way, it is unsuitable for places where you can scrape violently.
View detail
To protect Shroud, Tank
KUSHITANI 's Country jeans for weekend touring
I will definitely wear it.
Because I dyed Jeans at the beginning this year
When running for a day Shroud got dirty on Black!
Also, Tank's matte paint rubbed with Jeans,
I was glossy a little whether the oil transferred..
VERSION 1 Car Seal of Car Protection Seal
I used it, but did not follow the shape of Tank
A considerable float came out.
As soon as it was about to be peeled off the edge
Created version 2 with a reputation here.
Prepare is important for this kind of work.
I repeatedly created the pattern paper again and again.
Company's CAD is Large (Lol)
The actual sticking also moderately stretches, and it can be attached neatly to the curved surface.
Immediately after putting on the matte portion,
Small irregularities of fine wrinkle and painted surface are conspicuous,
I gradually become familiar and become beautiful like a photo.
Shroud part must come
It is a level I do not know well whether it is pasted or not.
I'd like to put a matte on Tank,
I think that I'm surprisingly doing a match.
The only drawback is the price - - -
View detail
The effect is thin
I used it for the portion that Tank and Seat of SR 400 hit.
This time it will be the second purchase.
Although it was used as scratch prevention,
There may not be much effect on the part that always rubs.
In the rubbed part, a hole has opened in Seat.
Usage is a product of choice.
View detail