Reviews
Small size is the reason for rust resistanceMaterial:Stainless Steel Screw!
[How is it used?
Replaced the brake hose guide with an external aluminum guide.:Replaced with Stainless Steel.
Was the one you received as per Image?
It is as accurate and clean as the Image.
Was the installation difficult?
Easy installation by simply replacing it.
How was your experience with it?
It can be used without worrying about Rust.
[Included Parts:were they on?
Screw only, nothing else is included.
[Was there anything that disappointed you?
Not particularly
▼Quantity since wdisc.:Pair (for Left and Right) Four bottles are required in the following table.
View detail
Washer diameter is Small
I used a 25mm Spacer to adjust the angle of the windshield on my CRF250RLY50, so I used this washer when I changed the fixed bolt.
The OEMScreen Fixing Bolt has a 13mm diameter UrethaneWasher and the color is Black, so I purchased this BlackWasher, but the diameter is too small, so I am not sure why. Even if the color is different, I would rather purchase a regular Stainless SteelWasher to protect the UrethaneWasher, because I can choose various sizes.
However, this BlackWasher itself is a very good quality product.
View detail
![[Bar End Repair Parts] Flat Washer](https://img.webike-cdn.net/catalogue/images/22383/031076-72_01_TS.jpg)
Small ObjectsParts
These parts are useful if you keep them in your parts box. View detail
Cowl stop.
The 900SS has a spacer and bolt that fly out of place due to vibration, and the front cowl that holds the spacer in place needs to be mass-tightened regularly as the bolt will loosen if you are not careful. Posh rubber is similar to the OEM product and I think the quality is even better. View detail
Just a Washer.
It's just Washer.
It is just a Washer with 22mm OD, M6 hole, 1.6mm thickness.
I said it twice because it is a Large thing.
We had no choice but to purchase the Bar End because the part in question, which had been stocked, had gone missing.
It may seem that Large is sturdy without it, but in fact, if it is not installed, the Bar End may easily fall off, cannot be firmly fixed, or may interfere with the Throttle.
So it is practically an indispensable component.
It's just a Washer. (Lol)
Considering the price, if you have the time, it is much cheaper to buy the same Size at Home center.
I didn't have Timing to go buy it, so I bought it on webike.
View detail
There are many color variations.
[How is it used?
I replaced the bolt and washer that holds the exterior of my KDX220SR with DRC's Aluminum Spacer for M6, and I really like the way it looks. However, I wanted to change the aluminum washer to a Green Light type to match the Lime green exterior, and since DRC does not have Green Light, I went to Webike and looked for another manufacturer's product and found this one. "Lime green." purchased
Was the one you received as per Image?
Compared to the DRC model, it is a little taller and smaller in appearance, but the design is along the same lines.
Since they are not used side by side next to each other, it is not a concern.
At the time of purchase, the price was 990 yen for a package of two, which is relatively expensive compared to DRC-made products.
(DRC products are available in packs of 4 for 782 yen and up.) The product was exactly as shown in the Image.
Was the installation difficult?
There is nothing difficult about this product, which is installed by biting it in place of a washer when fixing the bolt.
How was your experience with it?
Like the Aluminum Collar of today, this color can be used on Bolts with heads of 10.5mm or less in diameter, so it is highly universal, and the impression of the appearance can be changed depending on the Bolt head design used. The appearance can be changed depending on the BoltHeadDesign and Sense.
The coloring of Anodized is also vivid, and I will continue to use it and see how it fades due to UV rays.
[Included Parts:were they on?
None
The product has 13 color variations, so I think it will fit the image of large-bodied people.
[Was there anything that disappointed you?
I like the look of the product and I am not disappointed with the purchase.
As there are Anodized products The colors are not what I saw in the pictures." If possible, it may be safer to check the actual product at a motorcycle accessory store before purchasing.
The color I purchased this time is "Lime green." But...
Due to the nature of Anodized staining Candy Lime Green The color is very similar to the color of the original.
Other items that would be helpful
Point and hang of installation
As mentioned above, this is a fashion color used in place of a bolt washer, so it is a simple job to use this product (Aluminum Collar) when attaching a cap bolt of the appropriate length to the bolt stop on the part where it can be attached.
[Availability and clarity of the Instruction Manual
No Instruction Manual is available
The ease of use is top level, so I don't think it's likely to be used incorrectly.
[Notes]
It's been around for a while. FUJI TSUBO TYPE color." The outer diameter is larger than that of the "L", so please check if you want to install it on an exterior that has a depression.
[ITEMS TO BUY TOGETHER
As mentioned above, please purchase a bolt to match this product. Please consult with your wallet before purchasing.
[Opinions and requests to Manufacturer
This variety of color variations is quite attractive, please continue to sell as much as possible.
View detail
Is it sensitive to ultraviolet rays?
I put it in a Screen Fixing Screw, but I found cracks on 3 out of 6 screws, perhaps due to UV exposure, so I bought it for replacement. I have no problem with the quality if I consider it as a consumable product.
This time I bought it at the same time with Seat Cowl and for Side Cover for 6Millimeter screw.
View detail
It's degrading
I put it in the Screw of Seat Cowl and Side Cover to prevent vibration, but I bought it for replacement because there was a cracked part after about 2 years due to deterioration.
Since it is polycarbonate, I think it is necessary to be careful about cracks caused by over-tightening.
View detail
Black
Since the bracket is black, I bought it to unify the Fixing Screws with black as well.
Black is good in rust-resistant Stainless Steel, but not cosmetic in terms of the price of two pieces for sale.
View detail
If it fits with Screwhead.
The OEM RubberWasher of MRAScreen was cracked, so we replaced it with an aluminum one that looks and does not crack. I could not tell that it was BlueAnodized. View detail
Expensive but worth it!
[How is it used?
OEM Washer Rustetc. Rustproof Material as Repair Parts as it deteriorates over time.:I changed it to Stainless Steel.
Was the one you received as per Image?
High Quality and Rust-Free!
Was the installation difficult?
It is easy to replace an old Washer.
How was your experience with it?
You can use it without worrying about Rust as well as Nut.
[Included Parts:were they on?
Nothing else is attached as shown in the image.
[Was there anything that disappointed you?
Expensive is a regrettable Point in Neck.
I am not sure if they are not sold in Single Item, but I have a mid-Quantity:It is subtle that you have purchased 1 Set of 3pcs.
View detail
Mounted on a Brembo oiler
Because the rubber mat I bought elsewhere was too thick to fit on the oil pot, I bought this rubber mat, which is relatively thinner. It is just right to install on Brembo's large oil pot. It is used with the galespeed oil pot bracket. One thing is that the metal gasket is a bit thick and cannot be fully screwed in place when screwing the bolts. -------------------------------------------------- -------- Because the rubber pads I bought elsewhere were too thick and installed on the oil pot, I bought this rubber pad, which is thinner than it. Installed on the big oil pot of Blabo, it is just right .It is used with the GALESPEED oil pot bracket. One thing is that the metal pad is a bit thick. It cannot be completely screwed in place when the bolt is twisted. Powered by Google Translator View detail
to fix
Used to prevent scratching and loosening of PartsFixing Screws.
Since it is Stainless Steel, I thought it would be good for rust resistance and discoloration resistance.
View detail
to fix
When fixing the parts, I used stainless steel bolts to prevent rust, scratches, and loosening. View detail
comparatively high
I wanted a rust-resistant stainless steel to fix the parts, so I installed this one. Is it a little cheaper for a larger quantity?
Selling price, a bit expensive.
View detail
Stainless Steel
We preferred rust-resistant Stainless Steel for fixing the Parts, so this is what we used.
Quantity:1 Set of 2pcs. but the price is a little high.
View detail
Good Universality
[How is it used?
Used for Motorcycle maintenance
Was the one you received as per Image?
Street Image
How was your experience with it?
I was curious about Bolt's Wobble.
Since it is a RubberWasher, it is highly universal and could be installed as expected.
Other items that would be helpful
Opinions and requests to Manufacturer
It would be helpful if they could be purchased in single units (less expensive).
View detail
Spring washers are highly effective with trusted Posh products.
This product is a trusted Posh product, and the spring washer is very effective. View detail
Fixing of plastic parts
We use it to prevent scratches and loosening of the Fixing Screw part of plastic parts. The product is available in large quantities and is reasonably priced, so it is useful as a periodic replacement or consumable item due to deterioration or deformation. View detail
To Visor's One point!
I purchased this for my Visor One point. It is easy to install and brilliant! 。 A little pricey, but definitely a showstopper! View detail