Reviews
Copper Packing
I want to use copper packing for drain bolt when changing oil.
It was thinner and smaller than I expected.
There doesn't seem to be any oil leaks and the Seal is done, so that's good.
Quantity:1pc., cheap in terms of selling price? I wonder.
View detail
KITACO Needle SIMM set 3×6×0.3/0.6
Used to improve Kyanopi's mid-range speed.
I think it is good because it is cheap and effective.
View detail
Low Torque Location
Material:The aluminum anodized parts were about to be bald, so I inserted them between the parts.
It's just right to use it on Cowl for scratch protection.
It's a very solid object.
View detail
World's Strongest Loosening Washer
I bought this one after mistakenly buying a Nut with a locking nut without a locking nut, and was thinking of replacing it with a Spring Seat Gold or Nylon locking nut, but they deteriorate and can only be reused about 5 times. I was thinking of replacing them with Gold or Nylon type Nut, but they deteriorate and can be reused only about 5 times. I tried it because it seems to be reusable.
Nord-lock washer:The world's first friction-independent, non-loosening product is the non-loosening Washer developed by Nord-Lock."
The "WedgeLocking effect" caused by Cam makes it physically impossible for Bolt to spontaneously return and rotate to loosen. according to what someone said Physically impossible." That's a great thing, isn't it?
Check the bolt length and clearance something.
Run it and it doesn't loose at all. It's awesome.
View detail
V125 K5 Fork Bottom Bolt Gasket as
V125 K5 Fork Bottom Bolt Gasket as
Cheaper than buying OEM Product
View detail
Purchased to replace Oil
[How is it used?
Bought this to replace oil on my PCX125, used it between drain bolts to seal them.
How was your experience with it?
It was Exactly 12mm! It was a size larger than the Washer that was originally used, but it worked fine. I don't know about durability, but I don't need to buy more for the time being since there are several in the package.
I will make sure to change it every time when I change Oil.
How did it compare to other products?
[Points to note]
It comes in a lot, so if you think you don't need that much, you may prefer other products. However, it is a consumable product, so I don't think it would be a problem to have a lot of it.
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
For places where you don't want to stand out.
This is the best choice for a washer in an inconspicuous location.
It is inexpensive and safe to use.
View detail
On Axle Shaft
Purchased because it is easier to replace the pin every time when loosening the Axle Shaft for Chain Maintenance etc.
I think it looks good because it is Stainless Steel and there is no Rust.
View detail
carburetor adjustment
Purchased to adjust carburetor on SEROW250
Startup was very poor as rated!
Simultaneous work with standard Throw replacement.
There is only one CARBURETOR, so the work is easy.
Many people remove the air cleaner, but it only takes 20-30 minutes to remove the air cleaner!
I think it would be better not to touch the Main if it is just to replace the Exhaust System.
Now it is easier to frontUP because it is more responsive and has a little more Torque at low speeds!
View detail
For Setting
I purchased this for Setting.
I think anyone who looks at this product knows what effect it has, etc.
The product is exactly as described.
View detail
Used for Belt drop
I used it to drop the Belt on my Scooter, and it is a little thicker and has the same effect as a longer Pulley boss. It is cheaper than Pulley boss, and when the belt is reduced, the washer can be removed and the drop-in effect will be restored. View detail
High gear conversion of ADV150
The ADV150's Pulley boss is 49mm and my PCX150 (KF18) is 47.5mm.
There is no ADV150 High speedPulley at the moment, so the only way to increase the maximum speed is to adjust it with the Pulley boss.
In the NORMAL state of ADV150, the limiter is activated when the meter reading is about 115 km/h. At the very least, the meter reading should be set to 120 km/h. I would like to increase the Meter reading to at least 120km/h.
I would like to change to Pulley boss for PCX150 and adjust it with Shim.
I put in 1mm Shim and it was 119km/h. This time I bought 0.3mm and 0.5mm and made it 48.3mm.
As expected, the speed was 121 km/h (Meter reading), but the Belt moves to the outermost edge of the Pulley, so it is safe to assume that the Belt will be
I think the best condition is with 1mm Shim in place (Normal 0.5mm).
*This is a spec. that is outside the manufacturer's expectations. Please try it at your own risk.
View detail
High gear conversion of ADV150
The ADV150's Pulley boss is 49mm and my PCX150 (KF18) is 47.5mm.
There is no ADV150 High speedPulley at the moment, so the only way to increase the maximum speed is to adjust it with the Pulley boss.
In the NORMAL state of ADV150, the limiter is activated when the meter reading is about 115 km/h. At the very least, the meter reading should be set to 120 km/h. I would like to increase the Meter reading to at least 120km/h.
I would like to change to Pulley boss for PCX150 and adjust it with Shim.
I put in 1mm Shim and it was 119km/h. This time I bought 0.3mm and 0.5mm and made it 48.3mm.
The speed was 121 km/h (Meter reading) as planned, but we will BeltGuide to the outermost edge of Pulley to be safe.
I think the best condition is with 1mm Shim in place (Normal 0.5mm).
*This is a spec. that is outside the manufacturer's expectations. Please try it at your own risk.
View detail
Stainless Steel
The bolt was replaced with a stainless steel bolt and a stainless steel spring of the same material was installed to prevent loosening.
It is Stainless Steel, contains 10 pieces, and is reasonably priced.
View detail
Stainless Steel
This is an installation to change Bolt to Stainless Steel. The price is very reasonable and the number of pieces is very reasonable. View detail
Rear Fender SPLCowl and as a Spacer between them
The accuracy of the A-TECH Rear Fender SPL was not good, so I had to bite the Spacer between the body and cowl sides. Initially, I had multiple layers of Large Thread Nut and Stainless washers on hand, but I didn't want to crack them because they were too hard to hit, so I used Nylon. View detail
Fixing Screw section.
Flat washers are also made of stainless steel to prevent scratches and loosening. View detail
Stainless Steel
In order to use stainless steel bolts to prevent rust when fixing the parts, this washer is used to prevent loosening. View detail
Cowl scratch prevention
I was concerned about Bolt tightening directly on Cowl and installed it.
This is a relief.
I think it would be easier to use if it were thinner and translucent.
View detail
scratch-resistant
Purchased to prevent scratches when installing Fixing Screws for plastic parts.
It also helps a little to prevent over-tightening and loosening.
It contains a number of pieces and is reasonably priced.
View detail