Reviews
Small size is the reason for rust resistanceMaterial:Stainless Steel Screw!
[How is it used?
Replaced the brake hose guide with an external aluminum guide.:Replaced with Stainless Steel.
Was the one you received as per Image?
It is as accurate and clean as the Image.
Was the installation difficult?
Easy installation by simply replacing it.
How was your experience with it?
It can be used without worrying about Rust.
[Included Parts:were they on?
Screw only, nothing else is included.
[Was there anything that disappointed you?
Not particularly
▼Quantity since wdisc.:Pair (for Left and Right) Four bottles are required in the following table.
View detail
Cowl stop.
The 900SS has a spacer and bolt that fly out of place due to vibration, and the front cowl that holds the spacer in place needs to be mass-tightened regularly as the bolt will loosen if you are not careful. Posh rubber is similar to the OEM product and I think the quality is even better. View detail
Is it sensitive to ultraviolet rays?
I put it in a Screen Fixing Screw, but I found cracks on 3 out of 6 screws, perhaps due to UV exposure, so I bought it for replacement. I have no problem with the quality if I consider it as a consumable product.
This time I bought it at the same time with Seat Cowl and for Side Cover for 6Millimeter screw.
View detail
It's degrading
I put it in the Screw of Seat Cowl and Side Cover to prevent vibration, but I bought it for replacement because there was a cracked part after about 2 years due to deterioration.
Since it is polycarbonate, I think it is necessary to be careful about cracks caused by over-tightening.
View detail
Expensive but worth it!
[How is it used?
OEM Washer Rustetc. Rustproof Material as Repair Parts as it deteriorates over time.:I changed it to Stainless Steel.
Was the one you received as per Image?
High Quality and Rust-Free!
Was the installation difficult?
It is easy to replace an old Washer.
How was your experience with it?
You can use it without worrying about Rust as well as Nut.
[Included Parts:were they on?
Nothing else is attached as shown in the image.
[Was there anything that disappointed you?
Expensive is a regrettable Point in Neck.
I am not sure if they are not sold in Single Item, but I have a mid-Quantity:It is subtle that you have purchased 1 Set of 3pcs.
View detail
Mounted on a Brembo oiler
Because the rubber mat I bought elsewhere was too thick to fit on the oil pot, I bought this rubber mat, which is relatively thinner. It is just right to install on Brembo's large oil pot. It is used with the galespeed oil pot bracket. One thing is that the metal gasket is a bit thick and cannot be fully screwed in place when screwing the bolts. -------------------------------------------------- -------- Because the rubber pads I bought elsewhere were too thick and installed on the oil pot, I bought this rubber pad, which is thinner than it. Installed on the big oil pot of Blabo, it is just right .It is used with the GALESPEED oil pot bracket. One thing is that the metal pad is a bit thick. It cannot be completely screwed in place when the bolt is twisted. Powered by Google Translator View detail
G-Craft M6 Washer Large Outer Diameter
About quality and texture It's great. About the feeling of use The quality was good, and there was no problem installing it Products to buy together M6 bolt , m6 nut Difficulty of installation easy Cost performance and comparison with other products The price is a little more expensive than other companies, but I believe it's G-craft, so I'm satisfied with the purchase About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing There was no problem installing the blinker because of this item View detail
G-Craft M6 Washer Large Outer Diameter
About quality and texture It's great. About the feeling of use The quality was good, and there was no problem installing it Products to buy together M6 bolt , m6 nut Difficulty of installation easy Cost performance and comparison with other products The price is a little more expensive than other companies, but I believe it's G-craft, so I'm satisfied with the purchase About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing There was no problem installing the blinker because of this item View detail
For Setting
I purchased this for Setting.
I think anyone who looks at this product knows what effect it has, etc.
The product is exactly as described.
View detail
protection
Used to prevent scratches and loosening when fixing Cowl, Screen, etc. Low price, Quantity:1 Set of 4pcs. so it can be used quite a bit.
Consumables, cosmetically good product even with regular replacement.
View detail
Stainless Steel
The bolt was replaced with a stainless steel bolt and a stainless steel spring of the same material was installed to prevent loosening.
It is Stainless Steel, contains 10 pieces, and is reasonably priced.
View detail
Stainless Steel
This is an installation to change Bolt to Stainless Steel. The price is very reasonable and the number of pieces is very reasonable. View detail
Fixing of plastic parts
We use it to prevent scratches and loosening of the Fixing Screw part of plastic parts. The product is available in large quantities and is reasonably priced, so it is useful as a periodic replacement or consumable item due to deterioration or deformation. View detail
scratch-resistant
Purchased to prevent scratches when installing Fixing Screws for plastic parts.
It also helps a little to prevent over-tightening and loosening.
It contains a number of pieces and is reasonably priced.
View detail
Screen Protection
For the Screen, I originally used a black Washer and a black low head hex bolt, but I bought this bolt from Home center, and I like the shape, but the steel rusts. I like the shape of this bolt from Home center, but it is rusty from the steel. I've painted it a few times, but I've decided to give up on it. I've decided to give up on it.:I decided to replace the screws with Stainless Steel Plus screws, and also replace the Washer, which was dirty and rusty.
The product is a little thinner and stiffer than the ones I've used in the past, but it seems to do its job well. The bolt washer that holds the cowl in place is getting damaged, so I'm thinking of ordering another Size next time.
View detail
Fits: YAMAHA Day Version 400, YAMAHA XZ400D, YAMAHA XJR400, YAMAHA XJR400 S, YAMAHA XJR400 R, YAMAHA XJR400 R II, YAMAHA XJ750D, YAMAHA XJ400, YAMAHA XJ400 ZS, YAMAHA XJ400 ZE, YAMAHA XJ400 E, YAMAHA XJ400 D, YAMAHA T-MAX, YAMAHA T-MAX (FI vehicle), YAMAHA SRX250, YAMAHA SRX250 F, YAMAHA FZ750, YAMAHA FZ400R, YAMAHA Day Version 400, YAMAHA XZ400D
RCEngineerRingExhaust Gasket
And the price! I think the quality is good too!
I would use it again.
View detail
That's it. That's it!
Used for Oil replacement.
Since it is a consumable product, it is better to be cheap, and Quantity:The Set contains multiple copies, so if you make a mistake, you don't have to worry about replacing it.
View detail
I was able to use it on my KTM 250 EXC-R.
I was able to use it as DrainPacking on my KTM250EXC-R.
I can use it without any problem such as oil leakage.
View detail
There have been changes.
CYGNUSX (1YP2) with 0.95mm of other car OEM and 1.45mm total (1.1mm up from OEM)
I used 120/80-12 for the rear tire, so it was like Manual 2nd gear.
It feels like it's closer to 1st gear starting. The top speed is almost the same, although the rpm has increased.
It may have an effect on fuel consumption, but it is one more setting that is close to the ideal.
View detail
Quantity:It's great to be able to buy from 1pc.
Active Washer, Quantity:It is useful because it can be purchased from 1pc.
You can also choose the thickness of 1mm Copper Washer or 2mm Aluminum Washer.
This time, when I changed the clutch release of GPZ900R, I wanted to prevent interference between the clutch hose and the engine.
2mm thickness and Thickness:I used different 1mm, but Quantity:I am satisfied that I can buy 1pc. at a time so I can use it without waste.
View detail