Reviews
Generally good.
Material:I'm using Aluminum Oil drain bolt and I'm concerned about overtorque!
The Copper Washer will crush, allowing for better adhesion and easy Torque management!
They are cheap and I replace them once a year!
View detail
Bolts that are prone to loosening no longer loosen naturally.
Used for Bolt of KIJIMARear Carrier which is easy to loosen by vibration and overload.
Used for Bolt, which loosens up quickly when running with a heavy load.
I thought about using this Washer as a result of thinking about what I could do, although it would be so if I said it was inevitable because it would have exceeded the load capacity of this Rear Carrier!
I came back from touring with my luggage and souvenirs packed to the limit in my GIVI Top caseE300, but I was able to feel the effect because the bolt, which had been a little loose in the past, was still closed as it was before I left!
View detail
For the inevitably loose Bolts.
I had a problem with the Bolt loosening due to vibration, but I just put this Washer between it and tighten it, and it doesn't loosen easily anymore.
The part I used was the Tanax Shark mirror.
This is the moving part that connects the Handlebar to the axis of the Mirror.
The MirrorBody is a little heavy and the vertical vibration of the motorcycle makes it easy to loosen, but with a Washer in between, it's hard to loosen naturally!
There are various sizes, so I recommend that you buy after measuring the size you need well.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA BENRY CD50, HONDA monkey, HONDA monkey, HONDA Super Cub 50, HONDA dachshund, HONDA jazz, HONDA magna fifty, HONDA Monkey BAJA, HONDA Monkey R, HONDA Monkey RT, HONDA jazz, HONDA magna fifty, HONDA Monkey BAJA, HONDA Monkey R, HONDA Monkey RT
Always changing!
I used it when I bored up my Monkey. The Copper Washer under the left side is not leaking oil and there is no problem. View detail
Fits: SUZUKI Sky Wave 650, SUZUKI glass tracker, SUZUKI Glass Tracker Big Boy, SUZUKI Glass Tracker Big Boy Fl, SUZUKI Glass Tracker Fl, SUZUKI Wolf 125, SUZUKI SV650, SUZUKI SV650 S, SUZUKI ST250, SUZUKI ST250(Fl vehicle), SUZUKI ST250 E, SUZUKI RG500 "., SUZUKI RG400 "., SUZUKI RG125 "., SUZUKI RA125, SUZUKI GSX400L, SUZUKI GSX400E Katana, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1100S Katana, SUZUKI GS750 GL
No leaks.
It is used by exchanging to Short Tube in 1100KATANA. View detail
For custom and care around Brake.
I bought this to go with the Overhaul around Brake.
The deciding factor in the purchase
I decided to buy this product because I could choose the number of containers, so I could specify the amount I needed, and it was inexpensive.
It's also a trustworthy Brand, Active.
[Impressions of using it]
As you can imagine, I don't know because I've never had a Washer go bad and leak Brake fluid, but it's usually good.
There is also an Aluminum Washer, but I have decided to use Copper Washer for all of them because I have a certain preference.
This time, we made room for Quantity:I bought 1 Set of 20pcs. but you can use the extra for spare or next time, so it's good to buy more.
Products compared
I bought this product because it was inexpensive, a famous brand, and it was easy to choose the quantity.
【Review】
You can choose the number of packs, and the quality is completely fine, so if you are touching around Brake for now, I think you can buy it and it won't be wasted.
Quantity:Even if you buy 1 Set of 10pcs.:Buying 1 Set of 20pcs. doesn't make the price any less reasonable! But when I bought it, I thought it was Quantity:1 Set of 20pcs. is a little bit cheaper than 1 Set of 20pcs. because it gives you more Points! (Lol)
View detail
Fits: SUZUKI Sky Wave 650, SUZUKI glass tracker, SUZUKI Glass Tracker Big Boy, SUZUKI Glass Tracker Big Boy Fl, SUZUKI Glass Tracker Fl, SUZUKI Wolf 125, SUZUKI SV650, SUZUKI SV650 S, SUZUKI ST250, SUZUKI ST250(Fl vehicle), SUZUKI ST250 E, SUZUKI RG500 "., SUZUKI RG400 "., SUZUKI RG125 "., SUZUKI RA125, SUZUKI GSX400L, SUZUKI GSX400E Katana, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1100S Katana, SUZUKI GS750 GL
No leakage of exhaust gas
Used on a GSX1100S '87.
It is changed to Short Tube.
There are no exhaust leaks.
The size is perfect.
View detail
No problem
I bought this for my Stainless banjo. No quality problems. View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
To dress-up the Handlebar area
This is a very nice product. The plating is beautiful and the handlebar looks great; View detail
Gasket is made of copper for peace of mind.
This purchase was made in conjunction with my own new Brake line construction.
Material that comes with the Banjo bolt:I guess it is no problem with aluminum, but I hadn't done this kind of work for about 30 years, so I had to introduce the copper gasket just in case.
View detail
I didn't have a clip on the main jet, but here it is!
The main jet on my Motorcycle's OEM negative pressure carburetor is not adjustable, it's a Fixed Type! I was disappointed that I couldn't change the number of steps with Clip, and then I found this product!
It's great. That's what KITACO is all about. This kind of product gives me hope.
I was disappointed that there were a lot of Parts missing from the carburetor itself, but I was able to reassemble the carburetor safely and reseat the parts that had valleys as a result of adjusting with Shim.
It's hard to understand the product description, but it comes with a 0.3mm/0.6mm thick Shim.
In terms of the number of clipping steps, it was about 0.5 steps even if you pile up two of them.
In my case, I stacked them, so I adjusted about 0.9mm.
This is a two-cylinder motorcycle, so you can use this product as a quantity:I bought 2 Sets and adjusted them.
View detail
Fits: KAWASAKI Z750 (air-cooled), KAWASAKI Zephyr X, KAWASAKI Zephyr 750, KAWASAKI Zephyr 400, KAWASAKI XANZUS 400, KAWASAKI Eliminator 400, KAWASAKI Eliminator 125, KAWASAKI Eliminator 400-SE, KAWASAKI Eliminator 400-LX, KAWASAKI Eliminator 250 SE, KAWASAKI Eliminator 250 LX, KAWASAKI estrea, KAWASAKI Estrella Custom, KAWASAKI Estrea RS Custom, KAWASAKI Estrella RS, KAWASAKI ZZ-R250, KAWASAKI ZXR400, KAWASAKI ZXR400 R, KAWASAKI ZX-4, KAWASAKI Z750GP
Quantity:1 Set of 4pcs. so if you are TWIN, you have a spare!
Exhaust I bought this as a consumable when removing and installing pipe.
There is nothing special about the performance of this product, so OEM is fine. (Or rather, this Size) seems to be quite common Size in 80~90's midsize Kawasaki cars, and the adaptable car models are wide. So you can use it without worry even if it is out of OEM version.
Of course, functionally, there was no exhaust leak and the performance was sufficient.
However, because it is 4 pieces 1Pack, it is too much if it is Single or TWIN. It is good if it saves it as a spare, but attention is necessary.
View detail
It's cheaper than the OEMs and more helpful.
I used it for the V-Strom 650Rear brakeOH.
Size is the same and it installed with no problems.
OEMs are $77 a piece, while this one is $55, not expensive, but cheaper is better, right?
OEM is Material:It was Aluminum. I don't think there is any difference in performance with copper, but …
If you're curious, Material:You might want to buy Aluminum.
View detail
I wonder what he used it for. Maybe TW?
Probably, but I think I used it around the TW200 Brake.
I don't remember!
But I haven't had any problems where I've supposedly used this, so it seems to be doing its job!
Good, good, good!
View detail
Purchased as a spare
I bought it as a spare in case something happened.
I haven't actually used it, but it looks solid in my hands.
View detail
Fashionable items that can be fashioned in a super-expensive way!
DRC's Spacer is in many places.
Use.
M6Taper bolt in a pack of four.
They come in handy because they can be colored!
View detail
You'd be surprised how much trouble you can get into without it
I bought it as a used Motorcycle CoolantDrain
It is a model called X1R of Thailand YAMAHA
The one that was originally attached has become jerky, so I replaced it
It's amazing how much peace of mind it gives you when you replace it, even though it's such a Small Sized Part
The stores that sell these types of trains are limited, so the Small and Cheap Parts But you'd be surprised what you can do without!
I'd like to keep it in Stock
View detail
Safe to use
I used to buy a pack of 5 in the same size as the multiple motorcycles I own
They ran out quickly, so I made a pack of 50 this time
It's very inexpensive and there's no oil bleed even if you've replaced it
You can buy them with friends and others to share
View detail
it's the best
It's a Repeater because it's very cheap and totally usable
Other Manufacturers are too expensive and this might be the right price
Next is Quantity:I am going to buy the Set of 50pcs
View detail
Aluminum spacer
There are several patterns, colors and shapes to choose from
Other Brand ProductScreen's off-color plastic washer Exchange from
The head of the torque is changed to a thin type, and washer is used here The custom feel goes up
Since it also expands the contact area, it may be effective in preventing cracking
View detail