Reviews
since it is not meaningful unless it can perform processing of a torque cam -- attention -- that.
since it is not meaningful unless it can perform processing of a torque cam -- attention -- that. View detail
It is used as a number bolt. it is processed [ fender less ] although it is mere decoration truly -- I think that this will be the last finishing if it becomes -- a little high [ if it uses for fine places, such as not only a smile number bolt but a c
It is used as a number bolt.
it is processed [ fender less ] although it is mere decoration truly -- I think that this will be the last finishing if it becomes -- a little high [ if it uses for fine places, such as not only a smile number bolt but a cowl, admiration will come out custom and I will think that he is smart, but ] -- peevish [ come out and ] -- a smile
View detail
It attached to the pulley boss of an aprio (4JP8). It is a size of the inside diameter phi 13 and the outside diameter phi 21. 0.5 mm in thickness and 0.3 mm were purchased, respectively. I think that it is good to be able to change compositio
It attached to the pulley boss of an aprio (4JP8).
It is a size of the inside diameter phi 13 and the outside diameter phi 21.
0.5 mm in thickness and 0.3 mm were purchased, respectively.
I think that it is good to be able to change composition according to the state of a belt since the thickness of Sim has a variation.
For the moment, since the belt is in a new state, 0.5 mm is attached and the drop lump of a belt is carried out.
0 start acceleration became quite good.
View detail
Although it is small parts, it becomes the touch tightened depending on the place with GYUTSU, and is GODD! It seems that there is also reinforcement and is a recommend to a small dress-up up!!
Although it is small parts, it becomes the touch tightened depending on the place with GYUTSU, and is GODD! It seems that there is also reinforcement and is a recommend to a small dress-up up!! View detail
Processing of a torque cam which was not felt no experiences only by attaching ordinarily Like [ necessity ], . [ it is better to be by a paper etc. and to delete a clutch nut somewhat thinly although it may be it and individual specificity ] it i
Processing of a torque cam which was not felt no experiences only by attaching ordinarily Like [ necessity ],
. [ it is better to be by a paper etc. and to delete a clutch nut somewhat thinly although it may be it and individual specificity ]
it is better to adjust in accordance with a pulley, a belt, etc., since it is the setting parts which the clutch outer rubbed against the nut by a part for the thickness of a washer in my case and which not rubbing at first also runs, and it expands and may be rubbed against heat -- effective, if decided
View detail
The bolt of the circumference of the front fender of YZF-R 6'08 was changed to DRC. When the bolt of DRC was put in alone, compared with the pure taper bolt, the diameter of the bolt head portion was slightly small, and it felt thing insufficient.
The bolt of the circumference of the front fender of YZF-R 6'08 was changed to DRC.
When the bolt of DRC was put in alone, compared with the pure taper bolt, the diameter of the bolt head portion was slightly small, and it felt thing insufficient.
* Refer to the in play picture of DRC M6 taper bolt contributed before for a picture.
Then, when the spacer here was used, a feeling of a volume of the bolt rose at a stretch, and the settlement became good dramatically also in appearance.
Since it is general-purpose, it can be used even M6 v of the manufacturer of the other company, but it is just a bolt of DRC with the form which demonstrates true ability, and since it is preeminent for a sense of togetherness, I recommend-do that I have you use together with M6 v of DRC.
In addition, since the thickness is about 2 mm in the case of attachment, please be careful of bolt die length enough.
Although he is a gold bolt + gold spacer, even if he changes combination of a color, he may be interesting.
In addition, gold is deeper tone compared with the color of the other company.
View detail
This one was cheaper although it was the same number of ON as P company. Since the comparison of the actual thing is not carried out, the way of P company may have high quality. Since it was only the purpose of the crack prevention by fixation of
This one was cheaper although it was the same number of ON as P company.
Since the comparison of the actual thing is not carried out, the way of P company may have high quality.
Since it was only the purpose of the crack prevention by fixation of a cowl etc., here where a price is cheap was chosen.
Although it is still better if its own motorcycle has the same black washer since it is a black washer --
View detail
Since it came that he was poor at the nylon washer currently attached to the bolt of cowl attaching, it exchanged for the goods here. It is O that it can use without a price being cheaper than an original manufacturer's product, and caring about consu
Since it came that he was poor at the nylon washer currently attached to the bolt of cowl attaching, it exchanged for the goods here.
It is O that it can use without a price being cheaper than an original manufacturer's product, and caring about consumption.
View detail
It purchased, although the bolt hole after tandem step withdrawal is hidden. According to the color of a frame, lusterless Black paint application was carried out and it equipped with the head of the bolt. It is touch that the red anodized of the
It purchased, although the bolt hole after tandem step withdrawal is hidden.
According to the color of a frame, lusterless Black paint application was carried out and it equipped with the head of the bolt.
It is touch that the red anodized of the washer may become a one point of the circumference of a seat rail.
Taking out about 2000 yen merely needed two sets of courage for the washer...
View detail
Fits: KAWASAKI Z2 (750RS), KAWASAKI Z1 (900SUPER4)
Brand-name parts are missing items and were troubled. It has attached without exchanging and processing it together, when taking carburetor alignment.
Brand-name parts are missing items and were troubled.
It has attached without exchanging and processing it together, when taking carburetor alignment.
View detail
Parts which can be arranged by attaching to a needle in a part for 1/2 step of E ring, and the deep direction. Probably, it is good for the carburetor from which a needle cannot be chosen in having in fine adjustment of setting together with jets.
Parts which can be arranged by attaching to a needle in a part for 1/2 step of E ring, and the deep direction.
Probably, it is good for the carburetor from which a needle cannot be chosen in having in fine adjustment of setting together with jets.
(It is not contained in goods although the E ring is also in a photograph)
View detail
It purchased in order to suppress shakiness of the floating pin of a brake rotor instead of the original purpose of use. Since rotor thickness was 4 mm, even if 3XV type TZR carried out the kiln of the wave washer, since there was much GATA, it was in
It purchased in order to suppress shakiness of the floating pin of a brake rotor instead of the original purpose of use.
Since rotor thickness was 4 mm, even if 3XV type TZR carried out the kiln of the wave washer, since there was much GATA, it was in floating whose diameter of inside and outside is ideal in this Sim of exactly by the pin for 5mm.
View detail
It exchanged for the anchor bolt of the step portion of a JOG next zone. It attached simultaneously with the aluminum taper bolt which has come out of DRC. The fine place was also changed although it was a portion which is not seen usually. Th
It exchanged for the anchor bolt of the step portion of a JOG next zone.
It attached simultaneously with the aluminum taper bolt which has come out of DRC.
The fine place was also changed although it was a portion which is not seen usually.
There are also four kinds of colors and it can make oneself liking in the combination of a color with a spacer.
Since it is not expensive, it is recommended.
Although it cannot use for the place which needs reinforcement, I think that it is enough for covers.
View detail
it uses for stopping a gas tank, although an axle shaft etc. should stop loosening, and are boiled and the split pin is used, Since reuse is difficult in case of a split pin when it removes by maintenance etc., it must place mostly with a new article,
it uses for stopping a gas tank, although an axle shaft etc. should stop loosening, and are boiled and the split pin is used,
Since reuse is difficult in case of a split pin when it removes by maintenance etc., it must place mostly with a new article, but if there is that loosen and the size of beta pin suits [ which can reuse ] a stop in case of beta pin, please try.
View detail
The color of the bolt was attached by the color which is different from a spacer with a DEYURA bolt. It changed rather than the seen touch considered. It is satisfactory!
The color of the bolt was attached by the color which is different from a spacer with a DEYURA bolt.
It changed rather than the seen touch considered.
It is satisfactory!
View detail
When it was a copper washer of the obscurity manufacturer of a good point overseas, because the inside diameter was too small, a banjo bolt might not pass, but in the crash washer made from a kijima, there was no such thing once. It can use in comfort
When it was a copper washer of the obscurity manufacturer of a good point overseas, because the inside diameter was too small, a banjo bolt might not pass, but in the crash washer made from a kijima, there was no such thing once.
It can use in comfort.
Bad point It is not in particular.
If you buy what is contained in large numbers since you may have how many sheets in the reserve, I will think that it is good.
View detail
It is used with the zoomer (ruckus) of HONDA. Acceleration of the low speed area improved by inserting between a good point pulley and a boss. If it is this engine performance at this price, it is five-stars evaluation without a complaint. it
It is used with the zoomer (ruckus) of HONDA.
Acceleration of the low speed area improved by inserting between a good point pulley and a boss.
If it is this engine performance at this price, it is five-stars evaluation without a complaint.
it is also that there is also width of setting to some extent since the thickness difference is also released -- it is .
Since rotational frequency exceeds 8000 rotations, it is introductory Mandatory of external CDI.
Bad point Although there is no bad point in particular, there are notes.
If it equips with these parts, rotational frequency will go up rapidly.
If rotational frequency is not managed with a tachometer etc., an engine will break.
Since a tachometer function also follows if it is a takegawa and a digital meter of ACEWELL, it is a recommend.
View detail
It is used for caliper exchange of KSR. the beginning -- appearance -- When thinking that the used aluminum washer was used since it seemed to be OK, but the touch of a lever was SUKASUKA, the fluid had leaked from the banjo... it seems that the thing
It is used for caliper exchange of KSR.
the beginning -- appearance -- When thinking that the used aluminum washer was used since it seemed to be OK, but the touch of a lever was SUKASUKA, the fluid had leaked from the banjo... it seems that the thing used once is unexpectedly put in order as HETA
When it fastened thoroughly and was crowded, that was very quite right, but since it was strict prohibition, it used to be random to the circumference of a brake as the new article.
If it was KSR although he incidentally noticed later, four pieces are needed and it was easy to come out...
View detail