Reviews
I appreciate that InchNut is available in 1pc. units.
I used this product to install DockingHardware on my 2000 XL883XL1200C SPORTSTER 1200. This time I used Nylon nut to prevent loosening, and the price was reasonable. View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
CUB of Overhaul, incidentally.
CUB I bought this while I was at Overhaul of The price is cheap and stylish. View detail
Fits: HARLEY-DAVIDSON , HARLEY-DAVIDSON XL1200C SPORTSTER 1200
Preparation for Vehicle Inspection
Exhaust System will be returned to OEM when the car is inspected next February.
At that time, I purchased the Flange nut in advance to replace it.
Compared to the product photo, I think it is overpriced in a good way.
View detail
Looking for something similar but can't find it?
It is rather expensive,
Plating of iron instead of Stainless Steel
Cap Nut in Flange without Serrete
Hexagonal section is long
I have not been able to find anything at tool dealers or other places that meets the requirements of the above.
I'm sure I can get them more inexpensively, but it's already too dull to look for them.
It is just right for use on the Exhaust stud bolt of the Exhaust System, where you want to avoid troublemakers and such when removing and installing.
There are no concerns about the quality of the plating, and no particular peeling or rusting appears even after long-term use.
View detail
Fits: HONDA MONKEY125, HONDA MONKEY, HONDA SUPER CUB, HONDA glom, HONDA CUB, HONDA NSR80, HONDA NSR50, HONDA NS-1
Used on JC75 Grom. Probably only one turnout.
When replacing the clutch cover on the Grom, the centrifugal filter has to be removed, but without this I was reluctant to purchase it because I could not remove the nut that is deep in the clutch cover.
The Ratchet plug is 12.7mm, and the one I had was only 9mm, so I purchased a Conversion Adapter separately.
The length of this Adapter just reached the insertion hole, so we did not need to use Extension.
Once the centrifugal filter is removed, this part is no longer needed.
View detail
Replacement of aged well nut
The well nut used to hold the screen in place had deteriorated over time and had become chica-chica, so we replaced it. I am not sure if the old well nut was OEM or external, or how long it had been in use, but it seemed to have been in use for quite some time, and had hardened, leaving it in a tightened shape that made me think it might have been over-tightened.
In this case, we chose KITACO's product, which is less expensive than OEM's. The number of KITACO's product was 5 pieces, whereas we needed 6 pieces, so we used 2Quantity:I purchased a set. I think the number of units needed depends on the type of car and the location where it is used, but I don't think that 5 units are needed very often. Well, it is still cheaper than buying 6 OEM ones.
There is nothing particularly difficult about the installation, but removing the hardened old well nut was a large challenge, and we had to be careful not to damage the cowl by using radio pliers and picks. Once the old ones were removed, all that was left was to put the new well nuts through the cowl holes.
I installed it, and there is no particular problem, but in the review of other people who used this product on daeg, the size was Exactly to the Cowl depression, but on zrx1100, the diameter of the Well nut umbrella was a little small in relation to the Cowl depression.
As a matter of course, the new Well Nut will protect the Screen from vibration because the Rubber is newer and therefore more flexible.
View detail
Purchased for Bolt dropout prevention
[How is it used?
Purchased for Bolt dropout prevention
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy
How was your experience with it?
I'm worried if I don't see them regularly.
[Included Parts:were they on?
(after the -te form of a verb) not ..
[Was there anything that disappointed you?
I wish it was a little stiffer.
View detail
Good to keep it from loosening
I purchased this product for Exhaust System fixed Bolt.
The lock is tight and will not loosen, so it can be used safely in any location where there is vibration.
View detail
It was good
It is M8 Nut (Red) and I am happy with the color and finish.
However, I am concerned that they are easily scratched when tightened.
View detail
K-CON Hexagon Nut
About quality and texture The quality is good and the packaging About the feeling of use The quality was good, and there was no problem installing it Products to buy together m8 bolt, M6 Washer Difficulty of installation easy Cost performance and comparison with other products About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing I bought it for use under various circumstances, but I installed it in the place where the linker moved and I am satisfied View detail
Fits: HONDA MONKEY R, HONDA MONKEY, HONDA DAX, HONDA XR MOTARD, HONDA CHALY, HONDA BENLY , HONDA APE
G-Craft M6 Reverse Nut
About quality and texture It's great. About the feeling of use The quality was good, and there was no problem installing it Products to buy together M6 bolt , m6 nut Difficulty of installation easy Cost performance and comparison with other products The price is a little more expensive than other companies, but I believe it's G-craft, so I'm satisfied with the purchase About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing There was no problem installing the blinker because of this item View detail
Fits: DUCATI 1098R, DUCATI 1098, DUCATI 1098, DUCATI MONSTER 1200, DUCATI DIAVEL, DUCATI DIAVEL, DUCATI STREETFIGHTER, DUCATI 1299Panigale, DUCATI 1199Panigale, DUCATI 1299 Panigale S, DUCATI 1098S, DUCATI 1098S, DUCATI 1199Panigale R, DUCATI 1199Panigale S/Tricolore, DUCATI 1199Panigale, DUCATI Multistrada 1200, DUCATI Multistrada 1200, DUCATI Multistrada 1200, DUCATI MONSTER 1200S, DUCATI MONSTER 1200R
Repurchased.
I repurchased the Nut to replace it along with the Sprocket and Chain exchange.
Material:Since it is Aluminum, I decided to replace it because I knew it would get scratched when replacing the Sprocket. It had faded and I think it was just the right choice.
I think I will replace the Nut in the future when I replace the Sprocket, so I rate the cosmetics as low.
It would be good for a small dress-up of the footwear.
View detail
Fits: DUCATI 1098S, DUCATI 1199Panigale R, DUCATI 1199Panigale S/Tricolore, DUCATI 1098, DUCATI 1098R, DUCATI 1098, DUCATI XDiavel, DUCATI XDiavel, DUCATI STREETFIGHTER, DUCATI STREETFIGHTER S, DUCATI Multistrada 950, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S Touring, DUCATI Multistrada 1200S Pikes Peak, DUCATI Multistrada 1200, DUCATI Multistrada 1200S Granturismo, DUCATI Multistrada 1200, DUCATI Multistrada 1200, DUCATI Multistrada 1200 Enduro
A little dress-up
The rear sprocket, flange, and flange cover had been replaced with CNCRACING ones, but the flange nut was OEM, so the flange nut was replaced as well.
The work was done by a Dealer because I don't have many tools, etc.
Since it is a Flange nut, there is no need to change it unless the Flange is replaced.:Aluminum, so it should be replaced at the time of replacement.
Other products from CNCRACING with Red Anodized paint do not fade mysteriously, but this Nut has been in use for about 6 months and I think it is fading.
It is good for a little dress-up.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
I feel like Engine tuning!
[How is it used?
Normal city driving
Was the one you received as per Image?
Yes
Was the installation difficult?
Installation is easy since it is a replacement for the NORMAL, but it must be tightened with the specified Torque.
Tightening is easier to apply Torque because it is Longer than NORMAL.
How was your experience with it?
It looks Tune.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Not particularly
View detail
Even if you put it on and take it off.
I think Large is a good product because the Screw Mount is not ruined even after putting it on and taking it off several times. View detail
Fits: HONDA MONKEY R, HONDA MONKEY, HONDA DAX, HONDA XR MOTARD, HONDA CHALY, HONDA BENLY , HONDA APE
New ROD, so new Nut!
I renewed the ROD when I lengthened the Shift rod, and I also renewed the Nut while I was at it.
Since it is a Stainless Steel ROD, it must use a Stainless Steel Nut or it will be Rusty....
It is an ordinary Stainless Steel Reverse Nut.
View detail
I bought Pitch 1.5 by mistake.
[How is it used?
I purchased this product to secure the Engine Guard.
How was your experience with it?
The thing is fine, but I made a mistake and bought 1.5 when I needed Pitch 1.25.
It is made of Stainless Steel called SUS304, so it should be basically rust-free.
Prices are also available in the Quantity:I think it is reasonable for 1 Set of 2pcs.
View detail
Fits: DUCATI PANIGALE V4 S, DUCATI PanigaleV2, DUCATI SCRAMBLER 1100, DUCATI Multistrada 1260, DUCATI PANIGALE V4, DUCATI STREETFIGHTER V4 S, DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER S
I am self-satisfied.What is the effect experience with Single Body?
After finishing the improvement of riding position and appearance customization, we started to improve the driving performance and feeling by introducing functional parts. Replacement with AELLA Axle Shaft.
At the same time, Shaft collar and this nut were also replaced. Material at a reasonable price.:Even with Titanium, there is no way to experience the effect of these parts alone. It is a world of self-satisfaction.
It is a good product to temporarily satisfy the uncontrollable greed and self-satisfaction of AELLA believers. (Laughs)
View detail
prevention of slackening
It is installed to prevent loosening.
Black is more expensive, so here is Quantity:1 Set of 3pcs. is helpful because it is less expensive.
View detail
Screw replacement
Screw replacement to prevent loosening.
MaterialStainless Steel is rust-resistant and reasonably priced.
View detail