Reviews
Cheaper than Kawasaki OEMParts
I used it for 1400 GTR. Although it is used as a substitute for OEM Parts when exchanging a Well nut that is strange when you remove consumables or Cowl, there is no difference in Size or use feeling. KawasakiOEMParts (92015-1757) That's 1pc. Because it is about 200 yen, this item is considerably more affordable. I think that I will continue using it. View detail
This is good, is not it.
Quantity with certain Amazon ○ : Set of 50pcs. I bought a cheap commodity, but when I turned Screw, I got Nut and it did not become usable so I bought this item. I could firmly fix it. Please also be careful when you buy a certain Amazon 0 item. This item is recommended. View detail
Fits: HONDA Super Cub 70, HONDA Super Cub (HA02), HONDA Super Cub (C90 type), HONDA little cub, HONDA Super Cub 50 (C50 type), HONDA Super Cub 50 (AA01), HONDA SuperCUB110pro [SuperCUB110Pro]., HONDA SuperCUB110 [SuperCUB110]., HONDA CUB [Cub]., HONDA little cub, HONDA Super Cub 50 (C50 type), HONDA Super Cub 50 (AA01), HONDA SuperCUB110pro [SuperCUB110Pro]., HONDA SuperCUB110 [SuperCUB110]., HONDA CUB [Cub].
Is good
I was looking for something that will not rust as it will run on the mountain with CUB and become muddy.
It was not possible to attach it to the clipping point on hand, the Up type muffler of the water circle RACING.
The water head Racing Up Exhaust System may be used if there is an ultra thin socket?
View detail
Luxury that can be done because Custom.
Along with Bore up, Nut which holds Stud bolt tends to loosen, and as a countermeasure, I used Nut with nails, but because it is a part that gets high heat, I can not use Stainless Steel and use iron was doing. Iron is not all-purpose, Rust comes out. I was looking for something good Parts to find out this item. Those who are using Zeta's Lever think that they understand, but the products of ZETA are very accurate and have good appearance. The same was true for this Titanium nut. It is equipped with a lock mechanism to create thin and lightweight.
General User has Material : Titanium products are just a self-sufficient, Titanium raises Custom feeling to 1 Rank and 2 Rank. Titanium nut for Titanium Exhaust. How is it, is not it? Haha
It is a Parts you want to use by all means.
View detail
Small efforts will bear fruit.
Main purpose is to reduce weight.
It looks good Parenthesis and it does not rust so it looks better.
Since Bolt's Edge is pointed, it may be injured if you touch a little.
Weight reduction requires a small effort.
View detail
For the purpose of improving beauty
AGRAS : Screw is heavy to install the Racing slider
Because we used Titanium's long Bolt, it is bag-like so that the Screw part does not protrude for the purpose of preventing danger and improving aesthetic appearance Nut. KITACOConveniencePartsK-CON : I used Cap Nut with Flange.
It also becomes Dress-up
View detail
Fits: YAMAHA BWS100 (Bewith), YAMAHA JOG50 series, YAMAHA Axis 90, YAMAHA Grand Axis, YAMAHA Jog 90, YAMAHA BWS100 (Bewith), YAMAHA JOG50 series, YAMAHA Axis 90, YAMAHA Grand Axis, YAMAHA Jog 90
Feeling of security.
Bore up to 71 cc, so purchase it at the same time - I installed it. Because the compression ratio has not been raised, the original net STD Nut will be enough, but since there is a sense of security that you think that this one is durable, purchase - I am satisfied with the installation.
In either case, we may do some kind of processing.....
View detail
Used for XJR 1300 Disc Rotor Bolt
I used it for ENKEIWheel for installing Disc Lock.
Unlike OEM, install with Bolt and Lock nut.
There is a lock mechanism at the top of Nut.
Building is a good feeling, I fastened Torque wrench
1Quantity : 2pc. Set All, there was no funny stuck and it was the same tightening adjustment.
Stone Titanium Titanium (^^) It's light. (Lol)
View detail
Something useful
There are some points of use inside Cowl There are those who ride in Motorcycle are bulk purchase Recommendation.
It's almost disposable, but the price is not high so far, I think that there is no problem because the performance is also solid.
If you tighten it too tightly it will be Large and strange later so be careful!
View detail
Fits: KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-10R, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-S1000, YAMAHA YZF-R6, YAMAHA YZF-R6
It's pretty good
I attached Titanium nut, but I tried to buy it because the character was etched and Parenthesis was good.
Because the Stem shaft is visible because of Open end, I am requesting Hole Plug with One-off.
Strongly, Titanium has a sense of security, but it is a little worried about Aluminum.
In addition, I need a 36 mm Socket but I did not have a hand, so I went to the tool shop to buy it (I do not know how many times I will use it in the future ... f (^ _ ^;
View detail
Fits: HONDA MONKEY [MONKEY]., HONDA GORILLA [gorilla]., HONDA MONKEY [MONKEY]., HONDA GORILLA [gorilla].
Used with GORILLA
OEM's Bolt got rusted, so I bought it as a Stainless Steel if you exchange it anyway.
It becomes OEM's 14 to 17 mm, torque is easy to put on, it looks better.
Size is not sold to Home center.
View detail
Parenthesis on Titanium Well
Used for CNC Racing's Sprocket carrier + Sprocket. It's made with Beta titanium of peace of mind and of course satisfaction is also high. Originally Aluminum Nut So weight reduction ??? View detail
Shield fixing
Purchased for fixing Front cowlShield. Each time OEMShield was removed and my own Shield was installed, Walnut deformed and finally got caught.
OEM Product 350 yen / Fierce high! KITACO made price 1 / At the price of 4, the performance is the same. After all I will buy here ...
View detail
Fits: HONDA MONKEY125, HONDA MONKEY, HONDA SUPER CUB, HONDA glom, HONDA CUB, HONDA NSR80, HONDA NSR50, HONDA NS-1
It is KITACOKITACO Center Lock Nut Wrench.
It is KITACOKITACO Center Lock Nut Wrench.
I bought it for desorption of NSR 50 Clutch. It was very easy to use, it was solid, and I was satisfied with Large.
View detail
Purchase
Hexagon Nut of M10 is located in the neighborhood's home center Pitch 1. I bought a thing of KITACOConvenienceParts with only 5 things. M10P1. I was able to use it without problems with 25. KITACOConvenienceParts are rich in variety and useful. View detail
Purchase
I was looking for M10's Lock nut and found this item and bought it. It is used for mounting Bolt of Torque rod of Rear brake. M10Pitch1. It's safe because 25 Posh Flange Lock Nut. View detail
Exhaust System Flange nut exchange
Nut who was using before went loose while driving.
And since Rust was also coming out, I exchanged it each time. It can not be used for thick type of Exhaust pipe, but Exhaust System is Striker so it was good. Previously it was NGC and that Exhaust System needed exclusive items.
View detail
To fix Windshield ...
Purchased for Windshield of TRANSALP. Until now it had been totally deformed and had trouble removing.
OEM Product 320 yen / So it is quite profitable.
View detail
Just Convenience Parts
【Purchase motive】
I'm doing the desorption work of Mirror of FZ 1 FAZER and the corner of OEM's M6 Nut fixing Molror's Bolt has been shaved, : I found this item when I found a similar Nut in Stainless Steel.
【attachment】
I replaced it with OEM's Nut, so Fitting made no mistake.
[Others]
- From OEM's iron, Material : I think that there is almost no worry about rust becoming Stainless Steel.
- Since I think that there is a similar Nut as it is at the home center, there is a sense of security for those who installed it as a part for Motorcycle.
- The price is also Quantity : 1 Set of 2pcs. I think that it is valid if it is this place.
View detail
Inexpensive OEM Product quality
Well nut of Inner cowl, purchased because Rubber was torn by deterioration
Is it cheaper than OEM and quality is more than OEM?
Even if you buy one in reserve it is a good item.
View detail