Reviews
Stops firmly.
If they spread out a little, they will stop well.
It is not a place where force is applied, so be careful not to overtighten.
View detail
Convenient
I had a Base attached to use the RAM Mount, but it was in the way when I got it down in the Circuit, so I was looking for something to hide the Screw Mount after removing it and came across this.
This will not get in the way of getting down.
But it is expensive for a Nut.
View detail
Cheap and High quarity
I bought this product as a set with a bolt.
High quality. Machining and anodizing are perfect. It is used for fixing the fairing. However, the color will fade if exposed to direct sunlight. I don't think this price is too high.
The delivery to the Philippines was economy mail (18th). -------------------------------------------------- -------- I bought this product with a bolt and a set.The quality is high.Machine processing and alumite processing are perfect.It is used to fix the fairing. will fall. I don't think this price is high. Delivery to the Philippines was economy mail (18th). Powered by Google Translator
View detail
900SSCowl RubberNut replacement
RubberNut on Cowl and Cowl Bracket was damaged and was replaced.
I could not get it in with just my fingers, but I pushed it in with a Hexagonal Wrench and it worked.
View detail
They don't sell them around there.
Stainless Steel and Black! Cap Nut is common, but I could only find one with a Flange at Webig.
The quality is good! It's expensive because it's Stainless Steel, but that makes sense because it won't rust or fade!
View detail
NTBWell nut
Screen was replaced with a new one when Screen was replaced.
The quality is no different from OEM Product.
View detail
For weight reduction and dress-up
We also replaced the Nut while installing the DRCBolt to reduce weight and dress-up. (to prevent electrical corrosion)
I had learned my lesson by using an aluminum nut that I had purchased at a direct-shipping shopping site in a certain country, which had a blown screw thread when I tightened it.
As expected, there was nothing blurry about Mt. Screw.
I would not feel comfortable unless the product costs a little.
Due to the nature of the Gold genus, it is recommended to occasionally retighten or take measures to prevent sagging.
In my case, I apply a small amount of Screw lock agent to tighten the screws.
It was more effective than many times of increasing tightening. It does not sag at all.
Weight difference is NORMALSteel 15gx4pcs
M6x20Aluminum 5gx4pcs
1/3. Please use it to reduce weight.
View detail
Affordable Material:TitaniumFlange Lock Nut
We installed this ZETA TitaniumFlange Lock NutZT21-1061 (M6 P=1.0) on the M6 Cap Bolt that pushes the Master Cylinder.
The locking mechanism seems to have a narrower Screw Pitch at the top, which makes it impossible to tighten by hand at all.
I was worried that if it was too tight, it might damage the mountain on the Bolt side, but when I actually tightened it, it seemed to be Large sturdy without that much concern.
However, no type of lock nut can be guaranteed not to loosen, so I will be sure to check regularly to see if it has loosened.
I am very satisfied with the improved functionality and of course the quality of the look and feel of the product.
View detail
AGUSTA
I use Blue and Red differently, so that helps. View detail
AGUSTA
Match the color of Adjuster. View detail
Fits: HONDA MONKEY125, HONDA MONKEY, HONDA SUPER CUB, HONDA glom, HONDA CUB, HONDA NSR80, HONDA NSR50, HONDA NS-1
It was used for clutch exchange of NSR50. If there is a special tool after all, it is as safe as something. However, a little more than 5000 yen is slightly high only with the tool of clutch exchange.
It was used for clutch exchange of NSR50.
If there is a special tool after all, it is as safe as something.
However, a little more than 5000 yen is slightly high only with the tool of clutch exchange.
View detail
βTitanium.Maziora blue
The Nut that matches the βTitaniumium bolt that I had purchased is the only one for βTitanium, so I bought it from Webig, who had it in stock and delivered it quickly.
Lock nut with O-ring, so there is no need to worry about damaging the bolt screw threads.:Lightweight due to Titanium
The price is a little high, but it is also used for Works Masscene, etc., so it is a titaniumium nut with a high degree of self-satisfaction.
View detail
Fits: SUZUKI GSX1000S KATANA (KATANA), SUZUKI GSX1100S KATANA (KATANA), SUZUKI GSX750 KATANA, SUZUKI GSX750 KATANA, SUZUKI GSX750 KATANA
Good parts.
It is a safe part to replace it as described in the product description. When replacing the bolt, it is better to leave it to PRO since it is tightened by Torque, which is a provision for replacing the bolt after loosening all Stud bolt nuts. View detail
Fits: HONDA MONKEY125, HONDA MONKEY, HONDA SUPER CUB, HONDA glom, HONDA CUB, HONDA NSR80, HONDA NSR50, HONDA NS-1
KITACO Center Lock Nut Wrench
About quality and texture - Top quality. Solid steel construction with 1/2" drive for connecting your tooling. About the feeling of use - Very strong tool. I thought I might have some issues torquing down the nuts with only those 4 little fingers but it's not a problem for this tool. Products to buy together - To use this tool with ease you will be needing something to stop the part from rotating. You can either go with the gear holder or pulley holder which are both available here on Webike from Kitaco. Difficulty of installation - The tool is easy to use, not much else I can say here. Cost performance and comparison with other products - The price looks to have increased from the time I purchased it so now there is better value available from other brands but still priced reasonable for a top quality tool that will last you a life time. About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use. Any concerns, cautions, or advice when purchasing - MiniMoto do a Monkey engine special tool set that has all the unique tools for these engines, wish I bought that from the start. View detail
Convenient
Well nut is used for Cowl and Screen.
I bought it FOR REPLACEMENT because the RUBBER deteriorates as it gets older.
I think it is a good value because the Gold amount is lower than OEM and the quality is the same.
View detail
Fits: KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1 (900SUPER4), KAWASAKI Z900 (KZ900), KAWASAKI Z750FX, KAWASAKI Z750, KAWASAKI Z2 (750RS), KAWASAKI Z1100R, KAWASAKI Z1100GP, KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z1000J, KAWASAKI Z1000R, KAWASAKI Z1100 GPZ
For Sprocket diversion
It was used to divert the Sprocket of the Z system to Kawasaki's Zr-7S.
As you may know, the shape of the sprocket nut on Zr-7S, ZEPHYR750, ZEPHYRχ and other relatively recent vehicles is different from that of the old Z series.
The Sprocket nut on the Zr-7S has a two-stage outside diameter, but the Sprocket nut on the old Z-series cars is just a Nut.
Incidentally, on newer vehicles such as the ZZr1400, the speed sensor is often taken from the front sprocket rather than from the meter gear on the front wheel, and the outside of the sprocket is square on top of the two-stage structure.
I believe it was M20 or M18 (I did not measure it).
So why did I need this Sprocket nut……
This is because the Sprocket nut in NORMAL did not allow the use of a turning Washer.
As a result of diverting the Sprocket, the Zr-7SNORMAL anti-turn washer could not be used, and the anti-turn washer also had to be diverted from the old Z-series washer.
Then, the outer diameter of the NORMAL Sprocket nut was too large, and the washer could not be broken off.
After researching, I found out the difference between Sprocket nut, as I wrote earlier, so I decided to purchase it.
The result was a Large success.
The same Screw diameter and Pitch of the Counter Shaft could be installed in the correct way.
Parts installed together
・Sprocket
Brand：SUNSTAR SUNSTAR
Product name:8mmOffset sprocket
Part Number:3C6-17
Non-rotating Washer
Brand：DOREMI COLLECTION DOREMI COLLECTION
Product name:F Sprocket Washer
Part Number:10483
View detail
Fits: HONDA glom, KAWASAKI Z125 PRO, HONDA MONKEY125, HONDA ZOOMERX, HONDA ZOOMERX, HONDA ZOOMERX, HONDA glom, HONDA CB400 F (JF52-1000001-), HONDA DAX125, HONDA 400 X , HONDA CB400 R, HONDA CB250 F , HONDA CBR250 R, HONDA CBR125 R, HONDA MSX125 SF, HONDA MSX125, HONDA MONKEY125, HONDA CT125, HONDA CL250
Great stuff. It makes my bike looks better. View detail
Fits: HONDA SUPER CUB series 50-110, HONDA MONKEY series 50-110
Safe because it is dedicated
It's a dedicated part.
It is safe to tighten with regulation Torque.
It is even more reassuring to know that it is precise.
The suspension has been renewed.
View detail
Thin type
I purchased this low profile lock nut because the length of the bolt to which the Exhaust System is attached was too long for the normal thickness lock nut to fit over the Limit Screw.
Thanks to this, I was able to tighten it without any problem and I am satisfied.
View detail
Used for Screen mounting
I purchased this product to install MRAScreen on my ZX-25R.
I felt the construction was more solid than OEMWell nut.
However, Screen is stopped at 6 places, so this product is not available in Quantity:Quantity in 5pcs.:1 Set and 2 are required.
If you are interested in purchasing Well nut, please click here.
Recommended
View detail