Reviews
Luxury that can be done because Custom.
Along with Bore up, Nut which holds Stud bolt tends to loosen, and as a countermeasure, I used Nut with nails, but because it is a part that gets high heat, I can not use Stainless Steel and use iron was doing. Iron is not all-purpose, Rust comes out. I was looking for something good Parts to find out this item. Those who are using Zeta's Lever think that they understand, but the products of ZETA are very accurate and have good appearance. The same was true for this Titanium nut. It is equipped with a lock mechanism to create thin and lightweight.
General User has Material : Titanium products are just a self-sufficient, Titanium raises Custom feeling to 1 Rank and 2 Rank. Titanium nut for Titanium Exhaust. How is it, is not it? Haha
It is a Parts you want to use by all means.
View detail
Fits: KAWASAKI GPZ900R NINJA [Ninja]., KAWASAKI GPZ900R NINJA [Ninja].
Cospa - - -
This price with this Bolt
I think that the person of the Large body thinks (I also thought that)
Old OEM rust and weight
If you compare and compare
It is worth buying
Though I want it, those who worry about the price
Let's buy and refresh
If you keep on riding GPZ in the long run
It is Parts without loss
View detail
Fits: MV AGUSTA TURISMO VELOCE 800, MV AGUSTA STRADALE 800, MV AGUSTA RIVALE800, MV AGUSTA F4-750, MV AGUSTA F4 RC, MV AGUSTA F4 1000S, MV AGUSTA F4 1000R, MV AGUSTA F4 1000R, MV AGUSTA F4 1000R, MV AGUSTA F3 800, MV AGUSTA DRAGSTER 800, MV AGUSTA DRAGSTER 800RR, MV AGUSTA BRUTALE990R, MV AGUSTA BRUTALE800, MV AGUSTA BRUTALE920E, MV AGUSTA BRUTALE800, MV AGUSTA BRUTALE675, MV AGUSTA BRUTALE1090RR, MV AGUSTA BRUTALE1090RR, MV AGUSTA BRUTALE1090R
With Accent ♪
OEM's Wheel nut got scratched soon so introduce it here! Become one point Accent and Parenthesis is OK ♪
Ease of scratching.... Maybe it will not change (sweat)
View detail
Altogether
Even if there is no stock, good things will arrive early.. Although it is still not installed, I'd like to change it to a break sooner. Image street thing, I guess the best ~. View detail
Just right
I use it to stop Sprocket of Rear wheel such as NSR 50.
Because it is 17 mm in pure STD Nut, Wrench is hard to apply and desorption is difficult, but changing to this Nut will make it 14 mm so it will make Wrench easier to put on.
View detail
Dress-up to Celebrity
I installed it with Accent as RODFixing Screw of Shift change.
Compared to normal M6 Nut, it is much expensive but satisfied.
Let's tighten securely with the tool after adjustment. Because it is inconvenient to lose it by dropping it.
View detail
Fits: HONDA CB Series, HONDA XE series, HONDA APE 100, HONDA APE 50, HONDA KITACO cylinder head compatible, HONDA SUPER CUB 50, HONDA DIO(4Cycle), HONDA TODAY, HONDA MONKEY, HONDA MONKEY125, KAWASAKI KLX110, KAWASAKI KSR110, SUZUKI GS50, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI GAG, YAMAHA TT-R125, YAMAHA TT-R50E, YAMAHA TT-R90
Simultaneous installation is recommended
This time I used it together with Lightweight Camshaft Sprocket. Used Head is CUB 100 THAI 100 EX with J * N 105 cCam's 97 cc + PC 20 revision. It is designed to turn to high rotation with Cam effect. Weight reduction of rotating parts will work. This time it is only Titanium nut. As for weight, weighing about 1 g. Only 1 g, but 1 g. I do not know at about 8000 rpm of OEM use, but I think that you can see the effect for people turning from 10000 rpm. However, it may be about 10 times as expensive as OEM which is expensive. My turnip was 8 mm nut, but 6 v monkey lock nut has strength of 6 mm, so strength and resistance to Other Company Product is there.
Titanium Retainer + Nut set + Lightweight If you use it with Camshaft Sprocket it may be even better. I used a Titanium Retainer from a certain Manufacturer, but I used it in the past but it became a Buddha on the waist. Lightweight Parts think that it is better to use Risk side by side as well as side by side.
View detail
Small efforts will bear fruit.
Main purpose is to reduce weight.
It looks good Parenthesis and it does not rust so it looks better.
Since Bolt's Edge is pointed, it may be injured if you touch a little.
Weight reduction requires a small effort.
View detail
For the purpose of improving beauty
AGRAS : Screw is heavy to install the Racing slider
Because we used Titanium's long Bolt, it is bag-like so that the Screw part does not protrude for the purpose of preventing danger and improving aesthetic appearance Nut. KITACOConveniencePartsK-CON : I used Cap Nut with Flange.
It also becomes Dress-up
View detail
Fits: YAMAHA BWS100 (Bewith), YAMAHA JOG50 series, YAMAHA Axis 90, YAMAHA Grand Axis, YAMAHA Jog 90, YAMAHA BWS100 (Bewith), YAMAHA JOG50 series, YAMAHA Axis 90, YAMAHA Grand Axis, YAMAHA Jog 90
Feeling of security.
Bore up to 71 cc, so purchase it at the same time - I installed it. Because the compression ratio has not been raised, the original net STD Nut will be enough, but since there is a sense of security that you think that this one is durable, purchase - I am satisfied with the installation.
In either case, we may do some kind of processing.....
View detail
Used for XJR 1300 Disc Rotor Bolt
I used it for ENKEIWheel for installing Disc Lock.
Unlike OEM, install with Bolt and Lock nut.
There is a lock mechanism at the top of Nut.
Building is a good feeling, I fastened Torque wrench
1Quantity : 2pc. Set All, there was no funny stuck and it was the same tightening adjustment.
Stone Titanium Titanium (^^) It's light. (Lol)
View detail
Something useful
There are some points of use inside Cowl There are those who ride in Motorcycle are bulk purchase Recommendation.
It's almost disposable, but the price is not high so far, I think that there is no problem because the performance is also solid.
If you tighten it too tightly it will be Large and strange later so be careful!
View detail
Fits: KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-10R, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-S1000, YAMAHA YZF-R6, YAMAHA YZF-R6
It's pretty good
I attached Titanium nut, but I tried to buy it because the character was etched and Parenthesis was good.
Because the Stem shaft is visible because of Open end, I am requesting Hole Plug with One-off.
Strongly, Titanium has a sense of security, but it is a little worried about Aluminum.
In addition, I need a 36 mm Socket but I did not have a hand, so I went to the tool shop to buy it (I do not know how many times I will use it in the future ... f (^ _ ^;
View detail
Fits: HONDA MONKEY [MONKEY]., HONDA GORILLA [gorilla]., HONDA MONKEY [MONKEY]., HONDA GORILLA [gorilla].
Used with GORILLA
OEM's Bolt got rusted, so I bought it as a Stainless Steel if you exchange it anyway.
It becomes OEM's 14 to 17 mm, torque is easy to put on, it looks better.
Size is not sold to Home center.
View detail
Parenthesis on Titanium Well
Used for CNC Racing's Sprocket carrier + Sprocket. It's made with Beta titanium of peace of mind and of course satisfaction is also high. Originally Aluminum Nut So weight reduction ??? View detail
Shield fixing
Purchased for fixing Front cowlShield. Each time OEMShield was removed and my own Shield was installed, Walnut deformed and finally got caught.
OEM Product 350 yen / Fierce high! KITACO made price 1 / At the price of 4, the performance is the same. After all I will buy here ...
View detail
Fits: HONDA MONKEY125, HONDA MONKEY, HONDA SUPER CUB, HONDA glom, HONDA CUB, HONDA NSR80, HONDA NSR50, HONDA NS-1
It is KITACOKITACO Center Lock Nut Wrench.
It is KITACOKITACO Center Lock Nut Wrench.
I bought it for desorption of NSR 50 Clutch. It was very easy to use, it was solid, and I was satisfied with Large.
View detail
Purchase
Hexagon Nut of M10 is located in the neighborhood's home center Pitch 1. I bought a thing of KITACOConvenienceParts with only 5 things. M10P1. I was able to use it without problems with 25. KITACOConvenienceParts are rich in variety and useful. View detail
Purchase
I was looking for M10's Lock nut and found this item and bought it. It is used for mounting Bolt of Torque rod of Rear brake. M10Pitch1. It's safe because 25 Posh Flange Lock Nut. View detail
Exhaust System Flange nut exchange
Nut who was using before went loose while driving.
And since Rust was also coming out, I exchanged it each time. It can not be used for thick type of Exhaust pipe, but Exhaust System is Striker so it was good. Previously it was NGC and that Exhaust System needed exclusive items.
View detail