Reviews
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS Gryphus, YAMAHA CYGNUS X, YAMAHA FORCE, YAMAHA BW'S125, YAMAHA BW'S X, YAMAHA BW'S 125, YAMAHA BW'S R, YAMAHA MAJESTYS, YAMAHA MAJESTYS, YAMAHA SMAX, YAMAHA SMAX
The color was what I wanted.
There are four in total, but the bolt behind the Right Side did not fit, so I had to file down the body and managed to install it. I think it is an individual difference, but this is acceptable. I am glad that it was only this much because it is a visual effect part and if it needs to be modified so much that it changes from the original model, it would be meaningless to replace it. View detail
Fits: HONDA MONKEY, HONDA GORILLA, HONDA MONKEY BAJA, HONDA MONKEY R, HONDA MONKEY RT, HONDA APE 50, HONDA XR50 MOTARD, HONDA XR100MOTARD, HONDA NSF100, HONDA NSF100, HONDA XR100 Motard, HONDA Ape 50, HONDA XR50 Motard, HONDA Monkey R, HONDA Monkey RT, HONDA Monkey BAJA, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA NSF100, HONDA XR100 Motard
Purchased at Custom.
It was fine, but good. View detail
For mounting of cargo hooks
I used it to attach the Loading Hook for easy use of the Net to supplement the capacity of the Small TypeTank Bag. On the back side, a Loop is threaded through the Club bar.
I used a loading hook M8 with the same posh face as the colored Spool and a Stainless bolt M8x120mm without any modification. I think a M8 x 25mm colored spool or a 1cm short Loading Hook would have been fine. However, in the case of the Short Hook, the inner diameter is too large to interfere with the Club bar, and a thin Hook made of gold might be better suited for this purpose.
View detail
Certainly the vibrational frequencies are thinner!
Compared to before installation, the ThornThorn-like vibration between 3000 and 4000 rpm has become a little more mild. I would like to install a heavy bar end with Plus alpha from now on.
For your information, the product number is AT-W0006A for S1000RR to 18 years old cars.
I initially purchased AT-W0007 by mistake. The←s product is for S1000RR '19 and later.
View detail
For fine tuning
Used to compensate for Cowl Bracket Gap in combination with other thicknesses of Spacer View detail
for adjustment
Repurchased to add a step on the Screen I had previously put on. View detail
Spacer
Purchased to fine-tune the standing width between the Screen and the Screen stay. View detail
uplift
It is used to create an angle between the Screen stay and the Screen. It is black, the same color as the Bracket, so it does not stand out and is unobtrusive. View detail
Fits: SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI GSX-S125
Operation Fee Ring Improvement
I am riding a GSX-R125, but when I use high RPM or go for long touring, I felt the clutch connection was loose. I was a bit worried about disassembling the clutch as a DIY project, but it wasn't that difficult. The most difficult part was removing the gasket.
I was concerned about the possibility of one-sided contact, etc., considering the spring's seating position, so I removed the burrs with diamond sandpaper. The thickness was 0.9mm when I measured it with Caliper, though it was described as 1.0mm. I thought, "Why is this a plate material? I thought so, but... I have not verified whether it affects the surface of Spring's seat or not, because it is my personal impression.
After the installation, the connection feeling of the clutch became direct. The feeling of slipping when shifting up at high rpm has been reduced. I think that the pressure of the OEM clutch is stronger than that of the Shim, and it is harder for the clutch to slide. I thought that the weight of the clutch lever would theoretically be heavier since the spring has been reduced by the thickness of the shim, but there is no change that I can actually feel.
I think the Shim installation was effective. If you are dissatisfied with the clutch feeling, it may be worth replacing it. Personally, I am happy with the replacement.
View detail
I am satisfied with this price.
GCraft's CarbonPerafen is a surface [Color] I bought it to distribute the pressure with a thin Spacer with a Large tight outer diameter because it looked like it would crack with the Bolt that came with something like Clear.
The Spacer in this Series is finely Sized, which is helpful.
View detail
A wide variety of size variations to choose from
Multiple patterns of OD, ID, and thickness are available for use in various places.
This time Webike had M10Size in stock and I was planning to purchase other products, so I bought it as well.
Size, texture, etc. are perfect.
It was a great help because it was a hassle to go all the way to the Motorcycle supply store to buy the Size, which was not available at the nearby Home center.
It is not worth the hassle and cost to select and buy each Size, so if I wanted, I would have to pay 3,000 yen for a Quantity that contains multiple items and is less expensive.:I wish I had a Set product.
View detail
Instead of Washer
It was used as a Spacer when installing GIVI's Carrier.
I usually use a 6mm washer on top of a 6mm washer because it is a hassle to measure the size and prepare a spacer, but since I drop it every time I do maintenance, I replaced it with this product to improve serviceability.
It's just an ordinary Spacer, but it's nice to be able to choose from several sizes and thicknesses, etc.
From a functional standpoint, stacking Washers is sufficient, but this is a good product for those who care about appearance and serviceability.
View detail
Thank you for all your help.
I use it all the time.
Thank you again for your assistance.
Sometimes the stock is low at nearby mass retailers, etc., so Webike helps me out in such cases.
View detail
Used as Spacer for Exhaust System
When I buy a used external exhaust system, it may not have the spacer or bolt I need, so I buy it when I need it. It is very helpful that there are various sizes. View detail
Used for adjusting the width of Handlebar.
[How is it used?
The XJR1300C, which had to be inspected, was missing a handlebar width of about 10 cm, so we used four of these collars to pass the inspection.
The idea came from the Handlebar Spacer for the Z900RS from ARCHI.
Was the one you received as per Image?
It was just the right thickness, I wanted more than 22.2mm.
How was your experience with it?
Quantity:Pair (for Left and Right) To Quantity:2pc. Set by Set, and finally fixed at the Bar End of Babyface.
The inspector did not point out any particular problem, and the vehicle passed without incident with the width as stated on the inspection certificate.
View detail
Quantity:It was 1 Set of 2pcs.
I should have looked closer, but the Quantity:1 Set of 2pcs. without noticing Quantity:I bought 2 Sets.
I needed the color to make Rear Sets for footpeg, so I bought it for that purpose.
View detail
No motivation, no 4mm.
Bush replacement made it thicker by an ear, so Spacer took care of it.
5mm/4.8 3mm/2.8 each, short of dimension
Quantity because it is too much trouble to shave Spacer without 4mm Lineup.:Pair (for Left and Right) Washer adjustment in non-etc.
View detail
Fits: HONDA glom, HONDA MSX125
Cospa is good
Purchased to attach to Headlight.
It is easy to install and inexpensive.
However, I thought it would have been better if the Plating was a little darker, as the Gold was a little thin.
View detail
Used for installation of Rear Sets for other vehiclesOEMfootpeg diversion
Purchased as Spacer for Rear Sets installation on Z650 (Zapper) with OEM footpeg for GSX-R750.
Although it is possible to install the washer by using a stack of washers, we chose this product to improve the appearance.
No problem to install as the inner and outer diameters are the same as the Washer. The appearance has been improved to a large size, and I am satisfied.
However, if the height is WasherQuantity:The difficulty is that it is not possible to replace it completely because it was short by 1 pc.
View detail
![PREMIUM ZONE Cap Bolt Color [ for M 6 bolt ]](https://img.webike-cdn.net/catalogue/images/15903/91924_1_TS.jpg)
My impression changed quite a bit.
I put them around the Bolt of the Rear Mudguard. I personally thought that the color of the Bolt looked too bright before I installed it...so I bought two sets of Bolts and changed the Bolt to Black. View detail