Reviews
I think a little more Size would be nice.
I bought 0.3mm thick with 10mm inner diameter to improve the rattling of Chinese Lever.
The result was slightly too thick to use.
I wish there was a thinner 0.1-0.2mm
View detail
for adjustment
To adjust the brake lever & pedal place
I feel good that the rumble is at its smallest limit.
View detail
I'm glad I was able to use it.
I switched to NINJA1000sx, and when I tried to use STAND, I bought the color that fits without any research.
If you are looking for the best in the market, you will find that there is a lot to choose from.
I used it because it arrived immediately after ordering and the Size was right.
View detail
necessities
It seems expensive, but I can't do without it.
I think you should definitely put it on.
View detail
JC92 can also be used.
JC92 compliant.
It is recommended to use Rigid Handlebar to increase the amount of information on the car body.
You can also experience this with the original squishy Front suspension.
But the vibration is transmitted to Direct, so it is easy for your hands to become numb.TradeOff.
View detail
Appropriate size for Ninja1000
I bought it because the Pin supplied with the DAYTONA Front Stem Up Stand was limited to 24mm and the Ninja 1000 needs 27mm.
Of course, this product is made by J-TRIP and not by DAYTONA, so it is not a compatible product.
However, I thought that the inside diameter of a large body like this is the same as the standard! So I bought it, and tried to insert it into the smallest one of the attached pin of DAYTONA (maybe)... Exactly.
In fact, I was able to work with it in that state, but it is originally fixed firmly and used, and the strength is uncertain and may be damaged someday, so if you are poor and want to be able to make a stopgap, please do so at your own risk.
View detail
Just the right thickness
When I installed the Rear Sets, the Master Cylinder interfered with the Swing Arm and I was looking for a 3mm Spacer.
Parts mass merchandisers in the neighborhood are always 1 to Quantity:2pc. I bought this from Webig because they only had about a Set in stock and I wanted 4!
If I am not in a hurry to buy a part, I go to a mass retailer and buy it from Wehbig.
View detail
Instead of Shim adjustment of RADIAL CALIPER
Used for Shim adjustment of RADIAL CALIPER.
I changed the Rotor to a slightly larger one, so I used it to position the Caliper.
I am satisfied with the accuracy of this product.
I love that it comes in a variety of thicknesses.
View detail
K-CONParts, the one that scratches the itch!
[Usage]
Due to the change of Axle Shaft diameter by WheelConversion.
By inserting it into a 12mm Axle Shaft, it can be used as a Shaft with an outer diameter of 15mm.
【Motivation or reason for choosing or purchasing
There are two types of CUBSeries, one with a larger axle shaft diameter and the other with a smaller axle shaft diameter.
The hole diameter of the Swing Arm is 15mm and the Bearing hole diameter of the Wheel side is 12mm.
I was wondering if there is a convenient collar that can be inserted into a 12mm shaft to make the outer diameter 15mm. I did a search and found out that there is!
As you can see, K-CONParts has a great lineup of small items that are compatible with a variety of motorcycle customs.
[Fit & Feel]
We were able to do this with Cananoco, which is relatively easy to process and cheap to cut.
It was also easy to smooth out the sections with File.
It seems to be strong enough because I can drive without any problem after installation.
View detail
It's great as a general M6 ScrewSpacer though.
I think it's the best in terms of quality and texture.
There is no other place to praise, but I intended to use it as a Mirror Spacer of FZr1000 which is our beloved car, but the outline was too large to use.
I think it would be a better product if there was a Lineup of external form.
The video shows the FZr1000 Touring scenery after the maintenance was completed.
View detail
Items that are one point of fashion.
It is a kind of "One point" fashionable item that is used by inserting it into the hole of the cap bolt.
So there is no relation to Spec. or durability.
One thing to keep in mind is that it is made quite tightly in terms of dimensions. It's pretty stiff when you take it off after installation. thing.
Shove a slotted screwdriver etc. into the gap. (By Lever's principle) When you remove it, don't let it slip out and hit the surrounding parts, or get hurt by your hands.
I'm deducting one star because I think it's expensive for just a Small thing.
View detail
If you're going to install it securely, be prepared.
I bought this because I needed it to install ShiftAssist, and I was able to install it on my 2013 model without any modification.
InstallationInstruction Manual is not included in the package, so I installed it referring to the one I checked on Net.
View detail
For adjustment.
I used it to adjust the width of my DAYTONA rear stand hook!
I put on 3mm, but I think 5mm would have been better…
It is helpful to have various Size.
View detail
บู๊ชรองน็อตที่ได้รับ ขนาดสินค้าตรงตาม คุณสมบัติของสินค้าในหน้าเว็บ สินค้าคุณภาพดี แข็งแรง ทนทาน มีขนาดให้เลือกหลากหลาย View detail
Good product
I used it to adjust the Exhaust Band fixation.
As a Spacer, it is neither good nor bad.
The sale of Small portions is very helpful.
View detail
I don't mind the vibration and I recommend it.
There was a feeling that the Front fork had a pu-pu-pu feeling, and when I thought that the rigidity of Fork was too weak, I found out that Handlebar had done Rubber mount and replaced it, the Pull'n'Pull feeling was resolved splendidly. View detail
It comes in a whole range of sizes, so you can choose!
When changing the Handlebar, we needed to change the mounting of the Steering Damper and used it as a spacer for height adjustment.
For M8's outline φ20mm are suitable for the area where the steering damper is hard to be installed. 15mm height was purchased and then the height was shaved off by 2mm to 13mm to fit the car. The finish is beautiful and it doesn't look like it's been taken off.
If I ever need a Spacer for any kind of DIY installation again, I'll be looking for one from this K-CON lineup.
View detail
I used it to increase the height of the Handlebar.
Although this spacer is aluminum, there is a high-grade feeling because it is nickel plated. I was looking for a spacer with a good finish and shape because the mounting position is a noticeable point. View detail
You can find the exact Size you want!
If you're doing maintenance or custom work, you'll probably use color a lot, but it's inconvenient because it's surprisingly not available at Home center or even in stock at mass retailers.
I used to use several layers of Washer as a color, but it didn't look good….
After all, a solid color is good! It's also a good point that it's Black Anodized so it doesn't stand out!
View detail
Replacement for OEM parts
It was used to replace OEM parts (exhaust bracket color) that have been discontinued.
The quality was fine, and I was able to install it on the same OEM parts and etc.
It's not anodized, so it's not for the parts of the body that are important to look good.
I don't use it, but it was perfectly functional.
It's helpful when you're buying that they're properly labeled with the size.
View detail