Reviews
Looks good!
I think it is good because it is easy to tighten up the look just by putting it on!
Just a little cheaper would be nice lol.
View detail
Size is perfect and easy Custom!
Although the Parts can easily be used as they are.
Version up by wrapping or painting!
These are the same Parts as OEM. They also look the same!
View detail
Let's see if this will get us through this winter!
Since I have HandlebarUp, how about the Point that prevents wind? View detail
Well, good!
The material color is black, and it is an unpainted product. It is
Therefore, it is not pure Black.
If you just want to Black this place, buy it.
The others are expensive and a pain to install.
The accuracy of the puckering is excellent, but double-sided tape looks like it should be Plus.
View detail
Dullness Solution
Rubber is just right because it was tacky. It can be installed by anyone right away. 。 If you think Rubber is lame, by all means. View detail
Good vibes
I was really not satisfied with the OEM rubber cap, so after installing it, I am Large satisfied. View detail
My Motorcycle!
At first, I thought that some modification would be required for installation, but it is almost the same as OEMParts!
The work took about 10 minutes One Side, was well packaged, and the items themselves seemed to do a good job.
View detail
Good texture, though fine alignment is necessary.
Material:Since carbon products cannot be bolted on, it is necessary to adjust the position of the tail lamp and modify the position of the holes for the fixed pins. The carbon pattern is beautiful when exposed to sunlight, but it is not noticeable because of its small exposed area (laugh). View detail
Because OEMCover is not cool.
I bought this because the OEM Cover is not good looking, and I was worried about the Rear Axle guard, but at the time of purchase, I was considering an external exhaust system, and there was a possibility that it would interfere with some of the exhaust systems, so I decided to go for the easy way out.
The design is much cooler than OEM. Personally, I think it would have been nice to have a product without the word "Manufacturer" or with a simple design.
Also, the cover itself is reasonably stiff, so I think it will protect the Swing Arm if the fall is just a standing fall.
As others have said, the space between the pins is too narrow to fit easily, and since I didn't have a plastic hammer, I couldn't knock it in, so I widened the pins a bit.
Also, due to the trial and error process, the grooves were scratched quite a bit by the pin, and the pin's clamping side (the side that goes out) was sharp, though not sharp, so it scratched quite deeply.
When I wiped it with Plexus, it became less noticeable, but when I left it as it was, it stood out as Large, so I think I need to be careful when installing it.
View detail
HONDA Honda FootDeflector
This is a Honda OEMOption product.
MTfor Vehicle.
Double-sided tape and screw stopper.
The Cowl mounting screw is used, so there is no modification at all. (Co-tighten)
If the Double-sided Tape part is warmed up and the Cowl part is degreased and installed properly, it will attach securely.
It seems to me that Style takes precedence over wind entrainment effects.
(In Cool)
View detail
SUS441Oil tank protector
Material:Carbon and it looks GOOD!
The long screw for installation was also included, so I think that the screw is short enough to increase the thickness of the installation part, so it is not so easy to install.
On my unit, when I have the Handlebar fully locked in Left, the Fork's Outer seems to be interfering slightly.
View detail
Stylish
It can be installed on the instrument panel, center console and door lining. It is the best custom parts to dress-up your car. View detail
It's not bad, but the cosmetic?
It is the same color as the Front Axle Slider and the balance can be taken, and it is not bad, but I think the price is high. If it is half price at least, I think it is a bargain.
Is the Material penalized, or is it just enough to Cover you if you have a light standing gouge?
I don't think it's a replacement for Slider.
Well, Slider will be replaced if it falls, too, but it is Style outstanding compared with Rubber cover of NORMAL.
Installation is very easy, just remove the NORMALRubber cover, pull out the Split Pin, put it on and insert the Pin.
View detail
It's not half as luxurious as it sounds!
The cap is well machined so the Snap pin is a little tight but it stays in place. It's a lot more expensive than the OEM Rubber cover. This is a great product.
Material:I think PlasticCap can be expected to serve as a slider in case of a fall.
However, I think this price is still too high just for the Cap and Snap pin.
View detail
This is exactly the Parts I wanted.
The Z900RS must prepare the split pin when adjusting the chain.
I was looking for a Beta pin that is both fashionable and easy to maintain, and this is exactly what I bought it for.
I'm very happy with the accuracy of the NutCover, and the Pin is not a waste of time.
I dare to say that the drawback is that the price is too high and the end surface of the Pin is poorly finished and does not slide in comfortably as it is.:It's Stainless Steel, but the color is not good, so I polished the edge surface to be smooth, and the PinBody is also polished to Polished (although you can hardly see it)
I feel the mark printed on the cap is noisy personally, but it is bearable. However, because the position of the hole and the print are not matched, when you want to adjust the position of the mark, you need to adjust the position of the Axle Shaft.
It takes a certain amount of effort to pull out the pin, so I think it won't come off while driving or get tricked on the road, but I fixed the wire with insurance.
View detail
Fits: DUCATI 1299Panigale, DUCATI 1199Panigale, DUCATI 1199Panigale, DUCATI 1199Panigale, DUCATI 1199Panigale, DUCATI 1299Panigale, DUCATI 1299Panigale, DUCATI 899Panigale, DUCATI 899Panigale, DUCATI 899Panigale, DUCATI 959Panigale, DUCATI 959Panigale
It looks red, but the formation of the cross section is more - - -.
Used for 1299S. I wanted to unify at Tank Pad 's Manufacturer so purchase.
Carbon is quite thick and it seems to be protecting firmly.
It shines in DucatiRed.
However, as for the section of Carbon, although the surface polishing is done, it is conspicuous by thickness as it is as it is.
I wanted you to be careful so far as I will price so much.
Another person also pointed out, but since it is fixed with Seal material, I am worried about peeling off it.
0 pay closed.
View detail
Feeling tightened with a look up
For installation is It is mountable to the bolt. is. The position of Bolt was never Gap and it was able to be installed without problems. I made it to Twill Weave Carbon, but it looks nice as well. However, a little texture with Twill Weave Carbon of Side coverUnder - Although it may look different, I feel a sense of incompatibility, but I think that it can be exchanged because it is a few part after 2014 MODEL. View detail
Billet parts are roman
It is the installation to 2007 type R1.
I thought of purchasing for Dress-up.
The notation here corresponds to 09 - 10, but as long as you check ProductNo at Manufacturer 's Site, you can see that it corresponds to R1 in 2007.
Mounting is only to exchange OEM Parts. Since the attached Screw was shorter than the one of OEM, I used the OEM person.
I selected Silver according to Slider 's Base color out of 5 color' s colors It is a nice feeling.
Prices are somewhat higher so we recommend purchasing with Point.
View detail
This is chrome rather than stainless. Heavier gauge steel than expected, fittings are just ok, but looks fantastic when fitted.
This is chrome rather than stainless. Heavier gauge steel than expected, fittings are just ok, but looks fantastic when fitted. View detail
[Webike Monitor] Following on the Fender, it is purchase. Truly, structure is beautiful and satisfactory. Since it is small, although it may be a Parts of appearance, a feeling of existence is rather than a weight saving. (Kana with a hig
[Webike Monitor] Following on the
Fender, it is purchase.
Truly, structure is beautiful and satisfactory.
Since it is small, although it may be a Parts of appearance, a feeling of existence is rather than a weight saving.
(Kana with a high price)
View detail