Reviews
Regarding installation.
It is not Circuit use, so it is appearance oriented, but it has presence.
The only thing is that I have to use the screw holes in the Radiator carver for installation, but I can screw the Bracket in and use it as a bracket.
The Bracket is then screwed back on. When attaching a plastic cover on the surface, place a washer between the plastic cover and the surface to prevent cracking.
When I tried to work with it, the weight of the bracket caused one of them to come off. It took me about 30 minutes to get it to fit.
I don't have to worry about it. It's a foreign product, so it can't be helped. Also, since it is a screw hole of Radiator, it will be the first place to be hit when it falls over. In the worst case, the Radiator may be damaged.
It looks good, and I would buy it even if it were a little more expensive if it had the same features as the Frame Slider but closer in shape.
View detail
Spoiler
Very expensive for what it is. Why is there no carbon fibre option? It is so tiny and just made of plastic costs so much and doesn't even come painted. But it does make my bike look good. So oh well. View detail
Satisfied with Style
Since it is a Universal Product, it does not Exactly fit the Cowl curve, but I managed to install it.
I like the Style.
View detail
It's a complete jokeGoods, but it's hot
I bought it without expecting any effect when the third vane boom arrived.
You can't see it when you're riding it, so you can't have aerodynamic performance test-like fun when you're riding in the fog.
But it's good because that's the kind of product it is.
View detail
I feel a tremendous amount of Force.
Dress-up products.
You can install it by double-sided tape. It's very easy to install.
The subtle curves make it difficult to find a place to just fit in Cowletc. and it's hard to find a place to just fit in, but when you find a place that just fits and it's a good place, it's an amazing feeling.
When I drove the car after installing it, I felt like the front wheel was going to be blown off when I drove at 80km/h, but now I think it's gone. I feel like it is gone.
I felt an amazing (Down) Force force.
I think it's mostly a story product, but it might work, for one thing.
If you want a different kind of dress-up, this is the one for you.
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
Processing Base Kana ,,,
It is cheap! Thin! Purple (?_?) BALI is out!
The position of the hole is also subtle! (; ???) Why is there a Double - sided Tape called? (Lol)
I think that there is no problem if it is Processing Base.
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
Whether to find value depends on people
【What made you decide the purchase?】
Because there was no other Manufacturer issuing Winglets.
【How was it actually used?】
Although it is my personal opinion to the end, I thought that the price is somewhat higher due to quality.
Whether it feels appealing to this product or not depends on people.
About the quality of the product itself
First of all, the material of the product itself is cheap and not as bad as it is, but BALI remains
It can not be said that good construction is not good.
Also, since there is no Instruction Manual for product installation, I do not know well how to install it, I examine it in various ways, look at the picture of the product guide of Manufacturer, finally understand how to put it in some way.
■ Effect
Because I am a street-riding Main person, I do not know the effect of Winglett.
Although I bought it with an appearance emphasis, the loneliness of Front I felt in YZF - R 25 (Satisfactory) I think that it was buried.
【Was it difficult to install? (Hard parts case)】
Confused because there is no Instruction Manual about installation.
Also, the position where Double-sided Tape is attached can not be especially.
Why did you put here?.
Please find images of installation on MOS's page.
(I'm not sure I'm also there... )
【Please tell me the installation point and hang (Hard parts case)
Nothing in particular.
However, Double-sided Tape which is attached to the product from the beginning has poor affinity with the product itself,
It almost does not make sense of Double-sided Tape. (It will peel quickly)
I think that it is better to replace the Double-sided Tape to be used with a powerful one.
(I'm worrying about making it Magic tape. )
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
Because of Hard parts, none.
[Is there anything I was disappointed about?]
There is no installation instruction manual.
The affinity between Double-sided Tape and goods is too bad.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I think the installation Instruction Manual should be attached.
Moreover, it seems that it is better to review the material of the product itself or change the type of double-sided tape.
【Have you compared items?】
nothing special.
[Others]
I wrote about various products, but I think Concept itself is good.
Somehow Front site will change the impression of R25 which is unsatisfactory altogether.
Because the Winglet for R25 is not very much (it can be obtained even with Yahoo auction etc., but the price is high. )
, I personally think that if there is something that is Painted or if the installation method is solid, it will be popular.
View detail
It does not suit 10R
It is Wing-like Parts used in MotoGP Machine.
Easy Custom parts that anyone can stick with Double-sided Tape.
Although it was nice to order in a strawberry, but when you tried to put it in, it did not suit you as much as 10R. I mean, this Motorcycle 's Cowl looked quite complicated.
I try painting colors, I tried changing the shape, but after all there was no place to wear that I liked, it is already entrance.
There was a person wearing around Headlight at R25, but it suited him very well. It is ant because the price is cheap also thinking after buying it.
View detail
It can not be helped if it is Universal
I just bought it before I got out already
For motoGP after 2 weeks
I bought it.
To fit the rounded surface of the product
There is not a nice place for 12R Cowl to install
To the picture point without ginger
Because the texture of the product is Plastic Bodied
If it is painted with Spray it is too cheap
There is no power like motoGP
It is awfully small, but Big Li
View detail
Imechen effect Large!
I tried purchasing.
The first impression was that it was smaller than I thought.
Because the mounting surface is curved, depending on the type of vehicle it may be that the surface may not fit.
Also, as I was worried that the installation with Double-sided Tape will peel off when receiving wind pressure
(I think that there is no way to think about safety) ,
I cut it and put up FRP and use it by machining so that Screw can be stopped with the current car matching shape.
View detail