Reviews
Custom look
The Instruction Manual was also good and easy to understand.
If you are not confident about the installation, you can use Shop.
I think you should ask for it... ♪
View detail
Installation review
I bought it to change the rear luggage rack, and contrary to my worries, it fits well. However, you have to separate the air duct and pull it hard from the inside with pliers to make it fit all the way.
There is no difference from the other parts and the finish is clean. I dressed it up at a low price. -------------------------------------------------- -------- I bought it to change the rear luggage rack, and contrary to my worries, it fits well. However, you have to separate the air duct and pull it hard from the inside with pliers to make it fit all the way. There is no difference from the other parts and the finish is clean. I dressed it up at a low price. Powered by Google Translator
View detail
Left Side is Refreshing
Joint is Rubber, but because it is tightly made and stiff, it is tough to install without removing the Air cleaner cover.
There seemed to be no worry about it coming off that way, and the appearance was quite Refreshing!
View detail
Alot bigger than stock
Another awesome product from SP Takegawa, need to modify stock air box to allow the bigger intake to fit but it is worth it. Engine can breath so much easier now. View detail
Securely attached, strong netting
The air filter cover made by another company was installed, but the adhesion of the mesh part came off, and although it was repaired by Bond, it came off immediately.
The netting is solidly constructed with no risk of detachment due to its built-in structure.
However, the ducts are perfectly fitted and securely installed, with no wobble, and there seems to be no concern about the ducts coming off while driving.
The appearance is also neat and tidy.
When installing the Duct, it is better to remove the Air cleaner box before installing the Duct into the Air CleanerBox, because the fit of the Duct into the Air CleanerBox is Large strange, and it is easier to apply force.
View detail
I do not know if it is cold.
[How is it used?
I installed it on my XJR1300C. Even though it is not listed, it is the same as the NORMALXJR, so I was able to install it without any problems.
I have installed YOSHIMURA's Oil Temperature Meter, but I could not see any change in oil temperature.
Was the one you received as per Image?
It was just as Image.
As expected of MORIWAKI, the construction was very good.
Was the installation difficult?
Mount bolt of oil cooler to quantity:It is very easy to remove the 2pcs and insert this product between them.
How was your experience with it?
I do believe that the amount of air intake has increased.
I think so because the entrance is LARGE as shown in the image.
[Included Parts:were they on?
No, there is not. The OEM Bolt is also reused for installation.
[Was there anything that disappointed you?
Not particularly
View detail
I wonder if they are Refreshing.
OEM air duct removal and installation.
The Rubber was soft and easy to install and remove with the heat stroke alert in effect.
If it's winter, you might have a hard time.
View detail
Refreshing appearance, loadability up!
It looks Refreshing and better! This Parts does not change the driving performance, but the purpose of replacing it was the appearance and loadability. Originally, the air duct was designed to face upward to prevent water absorption. I think it was originally designed to look like a snorkel in a car, but I rarely drive in such a place, and even if I change to these Parts, the air duct is still on the top, and it looks cooler. I feel that there are a lot of good things about the new parts, such as the fact that the air duct is still there and the approach to the rear suspension is easier. As a bonus, the bolt mounting base that appears when the OEM air duct is removed appears as a good place to hang a net hook when loading! This is a great solution to the problem I had when I used to go camping and couldn't hang my hooks because of this duct!
It has a good texture, looks good, is easy to load Up, and even a Custom beginner could finish putting away the tools in 15 minutes.
View detail
Looks good!
I am not sure of the effect.
Maybe we'll find out when we drive more distance.
It looks pretty Cool.
View detail
Securing the Loader Hook on the cargo bed
Purchased product because the Loader Hook on the LeftFront cargo bed cannot be secured.
Duct Quantity for installation:I had some difficulty with the set, but managed to get it in place by using a SmallSlotted screwdriver.
Others have commented that there was a whining sound when driving, but I could not tell while driving because of the engine noise, but I could not help but notice such a sound when slowing down at traffic lights.
It looks OK because Refreshing and Loader Hook can be used without any problems.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS Cafe
Parenthesis OK
Anyway, Parenthesis is good.
It took a long time to deliver, but it was the right part to get.
Expensive but satisfactory.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS Cafe
eagerly awaited
It is almost the same as OEM, but I am satisfied because I have been waiting for this part.
About 60,000 yen is not cheap, but I don't think it is a loss, and there are individual differences in evaluation.
View detail
It is easy to install. Easy to use cargo bed
Installation is easy
(Since the connection is RubberMaterial?, it may be softer and easier to work with on warmer days.)
It looks good and makes it easier to run the rope around the cargo bed.
View detail
There is a hissing sound.
I'm not sure if I need it or not, although I'm sure it's cooling because it's catching the wind. Maybe it's self-satisfaction with my car, but the build is GOOD. View detail
Pretty good
[How is it used? fishing
Was the one you received as per Image? high
Was the installation difficult? No
How was your experience with it? good
[Included Parts:were they on? indicates negation, inexperience, unnecessariness or impossibility
[Was there anything that disappointed you? nothing special
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
If you like Carbon
I like Magical racing products and bought it to dress-up.
The texture of Twill Weave Carbon is great.
The clip on the reverse side is not used, but the front side is fastened with 3 bolts, so it seems to be large and sturdy.
I thought about buying YAMAHAEmblem and putting it on, but without it, it is Refreshing and I think this is the way to go.
View detail
SUZUKI Air Intake Cover
When you have one side not looking so good, why not just get a new one anyway. The cost was very good and better than I could get from the UK, like a thrid of the cost. Ok, shipping was extra but as I had other parts in the order, it all worked out brilliantly. Arrived with me within a week of ordering, very fast via Fedex Express. Packaged really well and no hint of any damage to the outer box or any of the inner boxes. Well, pleased with my purchase and now the bike looks that little bit better. Thanks Webike for the great service throughout View detail
TricksterPowerIntakeDuct
After the change, I can hear the intake sound better than OEM, and I doubt the power increase is enough to be noticeable, but the intake sound is pleasant, so I'm happy!
It's hard to see Custom, but I'm glad we did it!
View detail
Weight saving
The side ducts were fading, so I took this opportunity to convert them to Carbon. I am satisfied with the quality and feel. The best thing about it is that it is lightweight. View detail
Thin and durable. High quality.
Etching factory is still high quality. The texture is different from others.
I had been wearing one from another company, but it was the right decision to change when I replaced the side duct.
View detail