Reviews
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
The sense of ownership is unbearable.
Since it is the part that is visible when driving, it fills me with a sense of ownership and is very satisfying.
However, it was not easy to obtain the product because it was on order, and I felt that it would be impossible for an amateur to install it, so I asked Shop to do it for me.
View detail
Magical Racing Carbon Inner Cowl
I waited many months for this item but it was worth it. The finnish is perfect, the quality of manufacture excellent and the looks when fitted are amazing. A great addition to the bike. I will buy more from Magical Racing and I recommend their products. View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
It will look great on the outside!
2014 Japanese specification GSX1300R I installed it myself on HAYABUSA!
When installing, remove the front cowl set and then remove the handlebar After moving it to the tank side, remove the Brake and Clutch lever, and you will find the VIN number Remove the bolts on the meter bracket and replace the meter It is possible
It took me about 7 hours to install it, as it's pretty fussy to install, but it looks great! I think it's a no-brainer to buy it if you're worried about it because it will look good
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
The servicing side gets worse than NORMAL but the looks gets preeminently better.
I chose Magical as Cost performance and tried installing it myself. This is quite a struggle with Large strange work. In the attached manual, I described Handlebar ... but as a result of trial and error as to what I managed to do without removing Handlebar, I removed the Inner panel, Side cowl, Under Cowl, Clutch lever, Brake lever and finally Upper By taking Bolt fixing Cowl and shifting Upper Cowl a little while ago, Handlebar was able to fit CarbonInner without Rose at all.
Since Carbon hardly warped, installation should be done very carefully, around the junction of Normal cowl, CarbonInner, horn etc etc. For those who have always done Masking with curing Tape will be able to prevent scratches. Since this is a personal installation method to the end this time, I think that it is better to consider those who have experience in maintenance, or alternatives to be installed on Shop.
View detail
Products different from photos
In the photograph, Material attached by Screw : Rubber parts were not attached, and it took quite a while to install. It is bad that I did not notice it, but I was going to repeat the desorption and as a result Crack entered. Processing is necessary for price price etc. etc. Including this evaluation. Please check carefully when installing so as not to make the same feeling. View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
I feel luxury
I think that it is a good quality, reliable Manufacturer, and also excellence in Cost performance can not be missed.
It looks nice, there is also a sense of quality and the impression of Motorcycle also changes. I think that it is recommended product by all means.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Master Craftmanship
Magical Racing inner carbon panels are not only lightweight , but exquisitely beautiful items . Made with care by master craftsman , a pleasing addition to any custom motorcycle , and a must with matching mirrors . View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
It looks nice, but maintainability and heat resistance
First of all, the workmanship of the product, the arrangement of the Carbon eyes etc.. There is not much
Compared to OEM, it has an overwhelming presence.
Regarding the installation, although it is all self-installing, it was pretty daunting.
First of all, in addition to ordinary tools, Front-up Stand : Try twisting and detaching difficult unless you remove the Top Bridge.
Masking tape : Side cowletc. Masking to prevent scratches on parts that are likely to come into contact.
Hang the tank from the top : On the OEM's pillar will disturb the movement of the Top Bridge.
Removed parts etc. To prepare for installation, Top Bridge, Screen (It is necessary to divert the edge of TopCowl) ,
TankUp (It is necessary to move the Top Bridge to get it under the tank) ,
Brake and Clutch lever (Hose can not move to Tank side by bracing) ,
Either Handlebar (If the top bridge is not oblique at 45 °, the bar interferes)
If possible, if you leave Front fork, it will be easy to install without scratching the surroundings - - -
The attached state Fit feeling is Fit without firstly processing, but to OEMCover there is a Grommet,
There is no protrusion to push down from the top. Therefore, Quantity : Pair (for Left and Right) Can not fix bulging of.
Clearance with Tank Parts is wider than OEM, and insulation treatment is not done on Reverse side, so it is quite a while driving
I'm afraid to have a fever.
From 08 onwards, even under OEM, insulation measures at the bottom of the tank (Heat Insulating Material directly above Mission) Because of the hotness of the Engine is transmitted to the feet from the gap of Tank as soon as possible, further heat damage is likely to accelerate.
There is Fuse in TopCowlLeft Side, but it is possible to exchange somehow by floating the Cover around Meter.
It will be a rather troublesome and large-scale task, if you can not think this is fun, we will ask for a shop request.
Aside from those who are suffering from hot air from the bottom of the Tank since 08,
Automatic for Vehicle gap Tape is pasted between Tank and Frame to remove heat insulation treatment on the bottom surface of the tank bottom part Pump part and OEM Mission upper heat insulation seat to let the hot air escape from the Swingarm part.
By installing the WaterproofSmall Type electric fans at the bottom of the tank if possible, it is hardly hot.
.
View detail
The highest peak of self satisfaction (Lol)
We unified around Meter with Magical racing.
Performance etc. Although there is no change,
Satisfaction is the best I have on board. (Lol)
Previously, I was using OEMPanel with Carbon Seat, but the shape is difficult, I want CarbonPanel after all as Air comes in and tears. I bought it boldly.
After all, it is Cool when it is united.
ZX-14R is an Inner panel - As we sell both Meter panel cover and Magical,
I installed both..
Both of our vehicles are unified with twill weave.
Gold It is quite Large shopping
(Although not as much as the Exhaust System)
If you attach it, it is a convincing article.
It is lighter than OEMPanel, so it is also becoming lighter.
(I do not feel much difference (laugh) )
Regarding the mounting part, the part of the OEM's hidden claw is only the Tank Cover part, but it is fixed enough.
The position of the hole was also slightly deviated, but it was not quite enough to scrape, so it is quite a high product for accuracy.
I wrote long,
As I was driving all the time, I think that I was glad I bought it because it is the most visible part.
By the way, Production to order may be, but because delivery takes about one month,
When purchasing, plannedly
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
At this rest, it opts for preparedness and attaches by itself! Pleasing, since a result is also good and its COSPAR is good, although goods were seen. I would like to place an order for many things by addition again...
At this rest, it opts for preparedness and attaches by itself! Pleasing, since a result is also good and its COSPAR is good, although
goods were seen.
I would like to place an order for many things by addition again...
View detail