Reviews
Replace
Good Look. easy to install. About quality and texture About the feeling of use About Design About Size Chart Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing View detail
Looks?
[How is it used?
I bought it with other parts because it was cheap.
Was the one you received as per Image?
As expected.
Was the installation difficult?
The supplied non-slip rubber is too thick, so I prepared a separate tape and wrapped it around the bottom case and installed it over the top of the bottom case.
How was your experience with it?
Some motorcycles are equipped with these things from new, but I am not sure how effective they are.
Better than nothing, I guess.
[Included Parts:were they on?
Both band and rubber tape for fixing are included.
[Was there anything that disappointed you?
Quality was as expected and expectations were not disappointed.
View detail
Universal Bikes
About shipping and packaging Good product. i ordered and install it for my bike. nice look and protect the forks.fast shipping. thanks kitaco.. View detail
FOR CB250F
Easy to install.It looks good. reasonable price, good packaging.Thanks to the webike team.highly recomended.good for the genuine buyers. View detail
Parenthesis is also good.
My son, who used to wear it on his mid-size motorcycle, switched to a large model, but wanted to wear it again, so I bought it.
I'm hoping that it will prevent damage to the inner tube of the Front fork caused by stepping stones, etc.
My son says it is good from Cool.
The cost performance is outstanding as it looks and functions up at this price.
Installation is also very easy, so many people can do it themselves without bringing it to a motorcycle shop.
View detail
Inner Tube, Dust Seal Protection
Since some models of Manufacturer have been equipped with TippingGuard as a standard feature, we believe that it has a certain effect. (CB400SF Spec2, etc.)
As per the Instruction Manual, it is easy to install, just insert the non-slip rubber and fasten with the Tie Wrap.
When running at high speeds, it seems to function as a physical Guard, considering that it prevents a direct hit to the Inner Tube, since it is covered with dead insects and other debris.
I don't like the idea of it turning white over time, so I'm protecting it with Super hard, and I'm looking forward to seeing how well it holds up.
(It's cheap to replace...)
View detail
Impression changes! The effect is ….
[How is it used?
I purchased this product to hide rust on the front fork and to change the impression of its appearance.
Was the one you received as per Image?
Yes
Was the installation difficult?
It is easy to fasten with Tie Wrap.
How was your experience with it?
I am happy with the change in appearance.
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Mini Front Fork Guard
This time, after repairing an old ELIMINATOR 250SE with a front fork oil leak, I put it on just in case.
The front fork of the ELIMINATOR 250SE is soft, so I think it will be effective in protecting the Inner Fork.
I am satisfied with the cosmetics and the Accent.
View detail
การ์ดแกนโช็ค kitaco อันนี้ใช่งานจริงได้ดีเลยครับป้องกันฝุ่นไปจับที่แกนโช็คทำให้แกนโช็คไม่สึกหลอง่ายกว่าปรกติ View detail
Looks satisfying!
The appearance has changed dramatically.
It feels like the Front has been stiffened.
View detail
Appearance Self-satisfaction
It is easy to install.
self-satisfaction
I don't know how effective it is, because I don't fall over with my MONKEY125.
Front has gone lumpy!
View detail
Focus on appearance
Maintenance Stand is also available. View detail
Cost performance is good!
I saw that my webi friend KITA had installed it.
I bought it because I thought it would hide the corroded part of the Front fork.
I don't have an Instruction Manual for installation.
It's easy, material there, inexpensive, and only takes a few minutes to install.
Quantity:Pair (for Left and Right) It will take a little longer for those who want to go into more detail, such as the Balance of the
The front fork is also prevented from being damaged by stepping stones, etc.
In this case, the use of Wound and corrosion can be hidden.
It is also a dress-up, and the black parts on the front fork look good.
It is a Simple good thing.
View detail
Fork Guard
Easy to install
It looks good.
View detail
The real thing is bigger than expected
I installed it on a honda xr 50 motard model. I used it as an appearance, but the actual product I got was a bit oversized than I expected. If it is installed on other models, it may be more suitable, so I suggest that if it is installed on a mini For bike models, choose the appropriate brand for the model. The common product will always be over size compared to the mini bike model. View detail
simple and cheap
it tooks 10min. for install. fits perfect with my NC750X 2016. no gap and stay strongly on the fork because of the rubber. View detail
I'm not sure how it works, but I'm trying it on.
[How is it used?
It is attached to the Upright Front Fork.
Was the installation difficult?
Easy to install, just wrap the Body and tighten with the Tie Wrap.
How was your experience with it?
You can't see it, it doesn't have much of a Custom feel, and I'm not sure if it works or not.
[Included Parts:were they on?
Tie Wrap and Protective Rubber
(Point of installation and hang/Instruction Manual, availability and clarity)
There is no Instruction Manual, but you'll know it when you see it.
View detail
Also introduced in TZr250
Following the introduction of this product to the CBR250R (MC19), we have also introduced it to the TZr250 (1KT).
Installation is one minute (laughs)
I wrote about it in my impressions of the MC19, but I guess it's better to have it since it's on the latest models (laughs).
It's not like they were scratched by stepping stones or anything, but the old ones have to be given a lot of Large treatment, you know (laughs).
View detail
It's on all modern cars.
I'm sure you'd rather have it (laughs).
Therefore, I introduced it, CBR250 R HARICANE2.
The front fork seems to have overhauled.
Then it's even better, isn't it (laughs)?
Installation is easy. Just snap it on, cinch it up, and you're done (laughs).
Make sure you don't hit anything unnecessary and you're done.
By the way, I had to put one on my TZr250. ,.
View detail
scratch-resistant
The GSX-S125 is an Upright Front Fork and does not have a cover, so I installed it to prevent scratches.
The installation took about 15 minutes.
I think it looks a little better.
View detail