Reviews
Fits: YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ125X, YAMAHA YZ250X, YAMAHA YZ250F, YAMAHA YZ400F, YAMAHA YZ450F, YAMAHA YZ450FX, YAMAHA YZ250FX
Easy to apply Decal without YAMAHA's stamp
When applying Decal, OEMGuard has a raised YAMAHA imprint, and I bought it because I thought Decal would peel off easily.
It looks good, installs well, and is durable enough when used. No complaints, no excessive interference with the Fork outerTube, and the Decal was easy to put up.
View detail
Fits: HONDA CRF450R, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ450F, YAMAHA YZ125X, YAMAHA YZ250X, YAMAHA YZ250FX, YAMAHA YZ450FX, KAWASAKI KX450F
Required equipment for YZ
CYCRA Disc Covers and Quantities:Used in Set.
YZ is required for Enduro because of the weakness of the thinness of the Front fork abyss
Fixation is done by biting into the hollow of the Fork, then occupying the Screw to fix the Quantity:Pair (for Left and Right) The method is to spread out the screw to the "smallest" possible size, but this screw is a tricky one and very small.
Licking is very difficult to remove.
When removing the Screw, even if it is a hassle, it is necessary to clean the area around the Screw and make sure that the Wrench can be inserted securely.
Size-wise, it is unavoidable, but this is the only point to note.
View detail
as expected (neutral and negative events)
I used it on my FZS1000, which was for an XJR1300, but I bought it thinking it would work since it has a similar fork.
As a result, it was installed perfectly.
Clearance with Fender is Limit, but no contact and no rattling.
I am satisfied with the color. The price is high, but...
This itself is easy to install, but I had a hard time pulling out the OEM Guard.
View detail
Replace
Good Look. easy to install. About quality and texture About the feeling of use About Design About Size Chart Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing View detail
Universal Bikes
About shipping and packaging Good product. i ordered and install it for my bike. nice look and protect the forks.fast shipping. thanks kitaco.. View detail
FOR CB250F
Easy to install.It looks good. reasonable price, good packaging.Thanks to the webike team.highly recomended.good for the genuine buyers. View detail
Parenthesis is also good.
My son, who used to wear it on his mid-size motorcycle, switched to a large model, but wanted to wear it again, so I bought it.
I'm hoping that it will prevent damage to the inner tube of the Front fork caused by stepping stones, etc.
My son says it is good from Cool.
The cost performance is outstanding as it looks and functions up at this price.
Installation is also very easy, so many people can do it themselves without bringing it to a motorcycle shop.
View detail
Fits: HONDA CRF450R, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ450F, YAMAHA YZ125X, YAMAHA YZ250X, YAMAHA YZ250FX, YAMAHA YZ450FX, KAWASAKI KX450F
Required for Yamaha-type Fork bottom
[How is it used?
The fork bottom of the YZ series is so thin that it will break if it hits a rock or something,
I thought, "You should have thought of OEM! But I thought so, so I bought this one.
It would be safe to put it on from the time the car is new, and I can't even find a cheap Chinese one,
Was the one you received as per Image?
It is exactly as it looks. It is by far cleaner than making it on a lathe by myself, and it attaches properly.
Anodized is also darker than expected and Exactly on the OEM exterior.
Was the installation difficult?
No hassle at all.
Screw1pc. only.
Wrench was hard to get into if you tried to put it in a good position.
How was your experience with it?
It's a new car but I don't have to worry about it breaking so I can go GunGun bumping into rocks.
It also protects you from unexpected stones hiding under the wadachi.
Instead, Inner Tube is almost a no-guard, so if you get carried away, you will bump it and cry.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
I am replacing the exterior, so a Variation in a different color might be nice.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I would like to have other colors.
I was also wondering about this Type of Guard.
Disc & Bottom Fork Protector Disk & Bottom Fork Protector
Brand：POLISPORT:Poly sports
https://www.webike.net/sd/23639148/
View detail
Inner Tube, Dust Seal Protection
Since some models of Manufacturer have been equipped with TippingGuard as a standard feature, we believe that it has a certain effect. (CB400SF Spec2, etc.)
As per the Instruction Manual, it is easy to install, just insert the non-slip rubber and fasten with the Tie Wrap.
When running at high speeds, it seems to function as a physical Guard, considering that it prevents a direct hit to the Inner Tube, since it is covered with dead insects and other debris.
I don't like the idea of it turning white over time, so I'm protecting it with Super hard, and I'm looking forward to seeing how well it holds up.
(It's cheap to replace...)
View detail
Impression changes! The effect is ….
[How is it used?
I purchased this product to hide rust on the front fork and to change the impression of its appearance.
Was the one you received as per Image?
Yes
Was the installation difficult?
It is easy to fasten with Tie Wrap.
How was your experience with it?
I am happy with the change in appearance.
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Mini Front Fork Guard
This time, after repairing an old ELIMINATOR 250SE with a front fork oil leak, I put it on just in case.
The front fork of the ELIMINATOR 250SE is soft, so I think it will be effective in protecting the Inner Fork.
I am satisfied with the cosmetics and the Accent.
View detail
การ์ดแกนโช็ค kitaco อันนี้ใช่งานจริงได้ดีเลยครับป้องกันฝุ่นไปจับที่แกนโช็คทำให้แกนโช็คไม่สึกหลอง่ายกว่าปรกติ View detail
Fits: KTM EXC125, KTM EXC200, KTM EXC250, KTM EXC300, KTM EXC-F250, KTM EXC-F350, KTM EXC-F450, KTM SX125, KTM SX15, KTM SX250, KTM SX-F250, KTM SX-F350, KTM SX-F450, KTM SX-F505, HUSQVARNA FC250, HUSQVARNA FC350, HUSQVARNA FC450, HUSQVARNA TC125, HUSQVARNA TC125TX, HUSQVARNA TC250
Good looking guard. Snug fit on KTM
Matches the Acerbis rotor guard kit.fast and easy to install with 10mm socket. Beginner level installation skills.Good looking product. Would have given five starts but the fit is a little tight with the fork tube guards. I happened to have the fork tube guards off when I installed the these leg guards. I found that the fork tube guards had to go on first so you you can tuck the outside of the leg guards under the fork tube guards.Havent rode in mud yet, so not sure if it will be good. Will definitely protect lower shock from rocks and crashes, the plastic is really tough.. Had to remove the wheel to get brake side to fit but thats because I had rotor guard on. View detail
Looks satisfying!
The appearance has changed dramatically.
It feels like the Front has been stiffened.
View detail
Appearance Self-satisfaction
It is easy to install.
self-satisfaction
I don't know how effective it is, because I don't fall over with my MONKEY125.
Front has gone lumpy!
View detail
Fits: HONDA CR125, HONDA CRF250R, HONDA CRF250X, HONDA CRF450R, HONDA CRF450X, HONDA CR250
Light & Functional
Unsprung weight is important. These alloy bolts help with that! Bought these to complete a bike restoration... They work great and are lighter than and awesome look s stock bolts.Rated 5 out of 5 View detail
Fits: KTM SX, KTM SXF, KTM XC, KTM XC-F
Cost-effective Disk guard
It is a Disk guard that also covers the Bottom and Brake area.
The front wheel can be removed with the Guard in place, so it didn't get in the way too much when changing tires.
It looks tough, but the weight is light and the Guard has a wide range, so I think it is cosmetically pleasing.
The guard itself is scratched, but the disc and bottom are not damaged, and the brake is not broken.
View detail
![Upper fork guards [Upper fork Guards].](https://img.webike-cdn.net/catalogue/images/45640/8463500001_01_TS.jpg)
2022 yz250x
All-around protection. Good quality yz250x View detail
Focus on appearance
Maintenance Stand is also available. View detail
That's good. That's good!
Fitted with no problem!
I think it's usually good.
View detail