Reviews
Interference at Bottom
For various reasons, when I removed the FrontStubby, I felt it was not enough, so I installed the Fork Guard.
Depending on the type of car, it may interfere with the Upper Cowletc. when it is bottomed out.
Please note that this is a GPZ900R and it will hit you in the guts.
My personal opinion is that the Bolt is Torque but I liked the hex on the pot. (tooling comes with it).
View detail
Looks?
[How is it used?
I bought it with other parts because it was cheap.
Was the one you received as per Image?
As expected.
Was the installation difficult?
The supplied non-slip rubber is too thick, so I prepared a separate tape and wrapped it around the bottom case and installed it over the top of the bottom case.
How was your experience with it?
Some motorcycles are equipped with these things from new, but I am not sure how effective they are.
Better than nothing, I guess.
[Included Parts:were they on?
Both band and rubber tape for fixing are included.
[Was there anything that disappointed you?
Quality was as expected and expectations were not disappointed.
View detail
Fits: HONDA CRF250R, HONDA CRF250RX, HONDA CRF450R, HONDA CRF450RX, HONDA CRF450L
UFO UFO Fork Slider
This one was for a crf250 motocrosser, but I found information on social networking sites that it could be installed on a crf250md47, so I bought it. However, it interfered with the front fork and I gave up on installing it. It was a pity. View detail
Fits: YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ450F, YAMAHA WR250F, YAMAHA WR400F, YAMAHA WR250R, YAMAHA WR250X, SUZUKI DR-Z400SM
Fork Guard Bolt Set
BonsaiParts (Not so obvious)
Will it be lightweight?
I bought it because it was inexpensive.
View detail
Fits: YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ450F, YAMAHA WR250F, YAMAHA WR400F, YAMAHA WR250R, YAMAHA WR250X, SUZUKI DR-Z400SM
less conspicuous
I installed it on my WR250X
You will be delighted to see it Shiningly and shining.
Frankly, it is not very noticeable.
View detail
Fork Guard
Easy to install
It looks good.
View detail
Fits: KAWASAKI KLX450R, KAWASAKI KX250F, KAWASAKI KX450F, KAWASAKI KLX250, KAWASAKI D tracker, KAWASAKI KX125, KAWASAKI KX250, KAWASAKI KX80/II, KAWASAKI KX85, SUZUKI 250SB, SUZUKI RM-Z250
high
I replaced the OEM because it was getting tired.
The OEM color is just a plain bolt, so replacing it with ZETA's Fork GuardBolt will make it stand out.
For dress-up purposes, I think it is quite effective.
The only colors available are Red and Blue, so I would like to see other colors. Personally, I'd like to have a black one, but I guess I'll have to paint it myself.
I am satisfied with the results. I recommend it.
View detail
Interference with Down fender
I wanted to Refreshing Fork Guard.
I've installed it.
Down fender made by OVER.
Bracket interfered with …
I was able to install it, so we'll see how it goes for a while…
Be careful if you are using Down fender.
Well, there's no such thing as compatibility between parts.
I'll have to buy it to find out.
I like the look of it.
View detail
Fits: HUSQVARNA TE250, HUSQVARNA TE125, HUSQVARNA TC125, HUSQVARNA FE450, HUSQVARNA FE350, HUSQVARNA FE250, HUSQVARNA FC450, HUSQVARNA FC350, HUSQVARNA FC250
Mounted on TE250
I always ride HUSQVARNA's TE250 for forest road touring and hill climbing.
After about a year of use, the exterior of the car was getting worn out and the fork guard was getting cracks. I tried to order the OEM exterior, but it was very expensive. I tried to order OEM exterior but it was very expensive.
Now I can ride my motorcycle in Paris for another year.
View detail
Fits: HONDA CRF150R, HONDA CRF250L, HONDA CRF250M, HONDA CRM250AR, HONDA XR250, HONDA XR400 Motard, HONDA CR85 R II 97-07, HONDA CR85 R 97-07, HONDA XR250MOTARD
It'll make your feet stand on end! Kana.
Material:Because it is aluminum, it may become lightening, but because it is originally a very small screw.
But when the color is added to the tip of the front fork, it looks tighter.
I wasn't expecting much, but I was surprisingly pleased with the results.
It's for people who can separate it from the appearance Custom.
View detail
Fits: HONDA CB750, KAWASAKI GPZ900R, SUZUKI BANDIT1200, SUZUKI BANDIT1200, SUZUKI BANDIT1200S, YAMAHA XJR1300, YAMAHA XJR1300, HONDA CB400Super BOLDOR Revo, HONDA CB1100, HONDA CB1300 SUPER BOLDOR, HONDA CB1300SF, HONDA CB1300SF, KAWASAKI ZRX1200, SUZUKI BANDIT1200S, HONDA CB1300SF, SUZUKI GSX-R1100, SUZUKI GS1200SS, YAMAHA XJR1200, KAWASAKI ZZR1100, KAWASAKI ZZR1100
The atmosphere changes completely.
The appearance from the front becomes very parenthesis good and the conspicuousness goes up though it is a small part. View detail
Fits: HONDA CB750, KAWASAKI GPZ900R, SUZUKI BANDIT1200, SUZUKI BANDIT1200, SUZUKI BANDIT1200S, YAMAHA XJR1300, YAMAHA XJR1300, HONDA CB400Super BOLDOR Revo, HONDA CB1100, HONDA CB1300 SUPER BOLDOR, HONDA CB1300SF, HONDA CB1300SF, KAWASAKI ZRX1200, SUZUKI BANDIT1200S, HONDA CB1300SF, SUZUKI GSX-R1100, SUZUKI GS1200SS, YAMAHA XJR1200, KAWASAKI ZZR1100, KAWASAKI ZZR1100
wrong nut
i have received the package nice and not damaged. but when i ooened the box to check the contents, theres 4 screw and 4 nuts in one packing, 3 nuts supposed to be the one used for the item, nut/washer type. but theres 1 without washer, just the nut. refer to the photo and u will understand what i mean. webike, pls reply me, how to solve the problem. otem i bought is not cheap. View detail
Good for color change
The shape and texture are almost the same as the OEMs
However, when it comes to installation, it's not very accurate and you have to pull to fit the screw holes
Thanks to this, though, there is no tension-induced rigidity after installation
And put the Gold genus color between the screw hole and screw
(This is OEM, the color Gold is welded to the resin of Fork GuardBody So this area is different
The screw holes may be damaged if you install it in a haphazard manner, but since it is a part to be removed frequently, it is a good idea to take it off frequently
If you're not interested in color-changing, I would recommend OEM, although OEM is a bit more expensive
View detail
Fits: HONDA CB750, KAWASAKI GPZ900R, SUZUKI BANDIT1200, SUZUKI BANDIT1200, SUZUKI BANDIT1200S, YAMAHA XJR1300, YAMAHA XJR1300, HONDA CB400Super BOLDOR Revo, HONDA CB1100, HONDA CB1300 SUPER BOLDOR, HONDA CB1300SF, HONDA CB1300SF, KAWASAKI ZRX1200, SUZUKI BANDIT1200S, HONDA CB1300SF, SUZUKI GSX-R1100, SUZUKI GS1200SS, YAMAHA XJR1200, KAWASAKI ZZR1100, KAWASAKI ZZR1100
Noticeable
I am Material : I bought Titanium, but it was not good for baking. There are preferences, but there are quite individual differences, so people who stick to it is recommended to purchase at Shop View detail
Fits: HONDA CRF450R, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ450F, YAMAHA YZ125X, YAMAHA YZ250X, YAMAHA YZ250FX, YAMAHA YZ450FX, KAWASAKI KX450F
Included Parts : I can not use Screw
Screw is tightened with Hexagonal Wrench, and it expands Ring, but Screw immediately tightens. It is useless because it is naming before it can be fixed to Fork. I finally got off with the same 2 mm Torque. As soon as purchasing it is better to exchange Screw at Home center.
I do not know the Guard performance yet.
View detail
It may not be necessary.
Installation can be installed in about 15 minutes without difficulties. I'm pretty self-asserting even in such Small Parts.
Products received at hand did not have much grill, but I think that this is OK.
View detail
Fits: HONDA CB750, KAWASAKI GPZ900R, SUZUKI BANDIT1200, SUZUKI BANDIT1200, SUZUKI BANDIT1200S, YAMAHA XJR1300, YAMAHA XJR1300, HONDA CB400Super BOLDOR Revo, HONDA CB1100, HONDA CB1300 SUPER BOLDOR, HONDA CB1300SF, HONDA CB1300SF, KAWASAKI ZRX1200, SUZUKI BANDIT1200S, HONDA CB1300SF, SUZUKI GSX-R1100, SUZUKI GS1200SS, YAMAHA XJR1200, KAWASAKI ZZR1100, KAWASAKI ZZR1100
I purchased an Titanium M size. It's secure. No problem about that. 2 torque wrenches were included in the set.Both the same T25 size. But, the size of the screws that connect the bracket should be T20. (Size of screws to conne
I purchased an Titanium M size.
It's secure. No problem about that.
2 torque wrenches were included in the set.
Both the same T25 size.
But, the size of the screws that connect the bracket should be T20.
(Size of screws to connect fork and main unit is T25)
I mounted them using my own screws.
If you don't have screws stocked, you'll have to purchase them separately or change the screw.
They might have made a mistake putting 2 screws the same size. If so, other kits may include both T20 and T25.
View detail
It is Colet who is not in an old model although it is pure equipment at VMAX of an advanced age type. It was charmed by the low price and Poti was carried out to it. My vehicles required some devices (Size problem) to attachment. The problem clea
It is Colet who is not in an old model although it is pure equipment at VMAX of an advanced age type.
It was charmed by the
low price and Poti was carried out to it.
My vehicles required some devices (Size problem) to attachment.
The problem cleared with powerful double-stick tape.
Since it became carrying out
appearance good, it is +*.
View detail
Since it is existing appearance, it excludes, but attachment is easy. It understands, if a thing is seen. It is running, and since it shifts, it does not become precocious. Is practicality the twist which is not is Massey grade? There is a
Since it is existing appearance, it excludes, but attachment is easy.
It understands, if a thing is seen.
It is running, and since it shifts, it does not become precocious.
Is practicality the twist which is not is Massey grade?
There is also no specification of verification.
He bought it as dress-up parts from the first.
View detail
Since the hole had opened into the portion of the bellows currently attached to Faulk of DT50, it was attached instead. (Intention that off-road one does not run) Although it is not so expensive, there is touch in character with Yasu for a while.
Since the hole had opened into the portion of the bellows currently attached to Faulk of DT50, it was attached instead.
(Intention that off-road one does not run) Although it is not so expensive, there is touch in character with Yasu for a while.
Or [ that the thing of the carbon tone was better even if somewhat high ] ... It is better than nothing and he has a feeling which the circumference of a front made a few firmly.
View detail