Reviews
Great piece of mind for a minimal price.
This is definitely the way to go if your looking to protect that brake rotor and also caliper from rocks, bushes, etc...Looks good as serves a purpose. In the majority of the terrain we ride is very rocky, it has saved my Disc more than a few times. this little piece of mind is priceless, and well worth the money.Looks really good.10 of 10 would recommend. Hop webike and get you one. View detail
Cheap insurance
Mount feels very sturdy, mounts up super easy, . I'm stoked on the look and the protection.If you can take your front tire off, then you should have no issues installing this thing. It looks great and gets the job done. Once the mounting kit is on, cover replacement should be really easy if needed. Mine has taken some dings, but has held up well and still looks great.I'd recommend a lil loctite on the bolts that hold the plastic on. View detail
I bought one for my next vehicle.
I have used this disc in the past and purchased it to install in a new vehicle. I have never had any problems with the disc bending, so I know it is working properly.:The design is simple and parenthesis is good. The price is not too expensive, so I think it's a good cosmetic product. View detail
Material:Plastic but durable
I used it for about 5 years.
I bought a new Mount and used it on the next vehicle I switched to.
I think that durability is high because there is no large-scale damage though there is whitening by Wound and mud on the surface as expected though I do not use it so hard.
When you install the Disk guard, the benefit of the protection of Caliper as well as Brake Disc is large. The Caliper piston returns to ScauperScauper by finger even if Seal is not changed. I think it is protecting from mud and water.
By the way, the OEMACERBIS Mount is a little annoying because the Dust Seal on the Wheel often falls off when removing and installing the tire even if it is new. The quality is also a little low.
The ZETA mounting kit is totally pimped out.
The texture of the aluminum processing is higher than the one made by ZETA, and the rib of the Wheel Collar is effective. The photo shows the Mount which has been used for 5 years (90h), but there is almost no deterioration.
By the way, the Mount of ACERBIS is a structure that the collar part and the Mount part become a separate body, and the Guard moves round and round before tightening, but it can be fixed by tightening the Wheel nut.
ZETA is all one piece structure, so you can adjust the position by moving the mount and tighten the wheel nut to fix it.
Personally, I think the ZETA is better serviced with the Mount as well.
Please refer to this page when you purchase Guard and Mount separately.
View detail
For disc and caliper protection
I used it for about 5 years.
As expected, there are SmallWound and whitening by mud on the surface, but there is no Large crack or deformation, though I do not use it hard, and I think it is strong subjectively.
I don't know what would happen if you HardHit a rock, but it seems like it would hold up pretty well depending on how it hits.
Not only does it protect the Brake Disc, but it also protects the Caliper Seals.
I assume that you have been doing regular maintenance, but even though I have not changed the seal once, the Caliper piston still returns to ScapauperScauper with my fingers. I think it has been protected from mud and water.
By the way, ZETA's mounting kit can be used for mounting. All other ACERBIS Disc Covers can be installed together.
The Mount made by ZETA has a higher texture of Aluminum, and it can keep the condition of the image even after 5 years of use.
The diameter of the collar of ACERBIS is not so large, so when you put on and take off the wheel, it will fall down and you will feel stress.
The one made by ZETA is good because it has Rib on the collar and can be fixed firmly.
View detail
High durability
I used it for about 5 years.
I bought a new Mount and used it on the next vehicle I switched to.
Even though it has not been used so hard, the surface is indeed whitened by Wound and mud, but there is no large damage, and I think it is strong subjectively.
If you wear the Disk guard, not only the brake disc is protected, but also the caliper is protected. The Caliper piston returns to SuperScauper with your finger even if you don't replace the seal. I think it is protecting from mud and water.
By the way, the OEMACERBIS mount is a little annoying because the Dust Seal of the Wheel often falls when removing and installing the tire even if it is new.
The ZETA mounting kit is totally pimped out.
ZETA is more cut-out and high quality, and the rib of the wheel collar is effective or the collar diameter is a little large, so it is good because it is hard to fall when removing and installing the tire.
By the way, the Mount of ACERBIS is a structure that the collar part and the Mount part become a separate body, and the Guard moves round and round before tightening, but it can be fixed by tightening the Wheel nut.
ZETA is all one piece structure, so you can adjust the position by moving the mount and tighten the wheel nut to fix it.
View detail
good
i installed it on my klx250 I like it because it looks good as well as guard against rocks It's safer to have it installed View detail
Design is good
I chose this one from a number of disk guards because I like its mesh-like design It is
It's safe to say that you're protected up to Caliper
Because of this, the Caliper cannot be removed with the Guard still attached
You can use ZETA's Mount, but the Screw's diameter and the Guard's hole diameter are almost the same so
You will have to widen or screw in the hole a little
Well, I'm sure it will spread out after a few times of being attached and removed
I don't know at the moment, but it's not molded in one piece and the different colored parts are welded together
I'm a little worried that the blackened part of the mesh might come off as it deteriorates It is
This is a production end-of-production MODEL, so I think New Model is safer
View detail
Durability is the best
Z ● Since the Disk guard made by TA was broken, it returned to this product which was used by another car before that.
However, because it is not translated by oneself, I do not know how it broke with what I said, but it was cracking at the bottom of the Caliper and it was not that I was torn off when I saw the damaged part It was a GizaGiza like damage expressed in manga, not linearly broken.
When wearing it in other cars, when shaping this product of acerbis with Cutter Knife etc., I thought that flexibility and hardness are optimal because it was very sticky and needed to shave.
View detail
Design is Cool!
I also purchased separately owned WR 250 R for purchasing for RM - Z 250 because it is also attached and I like it.
Instead of "performance" to Guard the original Fdisc, Design is wearing only "looks" called Cool (;´･ω･)
If you look after Muddy road surface, it seems that there is a meaning only to attach because the mud adheres considerably to the surface, I think while car wash.
(Well it's because it's a product for that - - - )
In order to mount it, MountKit exclusive use seems to be hard to obtain in FOR JAPAN MODEL, so I mounted it using the standard ZETA made by MountKit.
View detail
Mounting with ZETAMount
Well originally
Installation Manufacturer Although it would be better to arrange
It is installation using ZETAMount on account of the delivery date.
Completely added work etc etc. It is possible to install without need.
From ZETA's thing
- Feeling that it seems to cool down is good
- FBrake Caliper seems to protect the lower part
- Manufacturer logo is entered at One point and there is no sense of noiseliness
So I selected a cotch
I would like to hopefully guard the disc firmly.
Incidentally
The color of White is slightly blue.
It does not match with White of WR 250 R
It matches White of ZETA's Hand guard.
It matches White of Side cowl of ZERO-G.
Why is not it?
View detail
I felt that the disc was protected slightly ♪ Relieved ♪
Front Disc is damaged by hitting when falling, mud - Cover to protect from stepping stone etc.
Photo (Right) Like ___ ___ ___ ___ ___ 0
Because it is not a hard drive to a huge rock etc, comparison of defense power is difficult - -
I turned around at Enduro and threw out Motorcycle and threw it safely (Lol)
FOR JAPAN MODEL Regardless of the outside, many Enduro top riders also love Disc Cover so many people think that it was happy Yo (ω ω - )
By the way, I am Color "White" I bought it, but it looks somewhat like Blue right?
Do not bother with this ww
* For installation, ACERBIS's exclusive Mount Kit (ProductNo : AC-20-080 WRR) is required. Do not forget!
View detail
It is not uncomfortable at high speed.
Something strange at high speed etc. I did not do it.. I think that cooling is also problematic if such a hole is opened. (The company Z has little hole in both new and old). The color is also beautiful. Off does not run almost, but it is cool and it is coolest. View detail