Reviews
If the Rim width fits, ◎
Depending on the Rim width, there may be a bias, so the center position may be gapped. However, it is easy to apply and mistakes are not likely to occur. If you are a first time user of rim tape, you may want to buy it, but if you are a second time user, you can use FreeHand without a guide. View detail
Fits: Others 17Inch wheel car
Peeling off.
I thought I had degreased it properly, but it came off easily.
I will buy it again and TRY to de-grease it more thoroughly.
View detail
Attached to Ducati SCRAMBLER
I bought this to attach Rim stripe to my newly purchased DucatiSCRAMBLER.
Size is 17&18-inches Color to match the car body color:YellowSingle Body 10mm width was chosen.
I wanted to start pasting immediately, but I don't know which wheel to paste the 18 separate tapes on.
There is no mention of this in the Instruction Manual.
Are the top 8 sheets in the front FOR 18-inches or FOR 17-inches?
Are the two spare sheets the last two on the front or the back?
Are you asking me to paste it in the right way?
As a matter of urgency, I inquired through MDF's Home page.
I have not received a reply yet so I am unable to paste it.
View detail
Rim sticker
Easy to put up.
It sticks well.
Quite sturdy.
View detail
easy to stick to
I put it up and it looked good and I liked it, but despite careful degreasing, some of it started peeling off after about a year. I used the MDF ones for about 3 years before I bought the new ones and they never peeled off. It was cheap, so if it lasted for a year, it would be a good thing. It's cheap, so it's possible to change it regularly. View detail
Vulgarly gaudy
First of all, it is expensive.
Combined with the color of the Wheel, it became vulgarly gaudy. Also, the Rim was pear-shaped and peeled right off.
Adhesion appears to be weak.
View detail
No need.
Bend the product to make it look like a Rim, but use it as such.
I didn't feel the need to do so.
The point is, if you can make a nice circular shape, you can do it by hand.
I used the circular marks in Rim as a guide when pasting.
I was able to apply it by hand.
It might be useful to have such a landmark, since it should not exist in normal Rim.
However, it is a product of Level that may.
There are two types, one for 4 and 6mm and one for 10mm, so be careful when purchasing.
If you don't like to put it on, it's not expensive and you should buy it.
View detail
It's a little plain.
It was easy and clean to apply. I don't know how durable it is yet. The color was a little plain. View detail
The imeChain effect is outstanding.
The color choice is important because it changes the whole atmosphere. 6mm is better than 10mm for GSX1300R HAYABUSA. View detail
Not long enough…
I attached the overlapping part of the seal according to the dimensions in the Instruction Manual, but in the end it was about 1cm short.
You might have to stretch it a bit as you pull it off. 。
I think it's cool in its own way.
View detail
Fits: KAWASAKI Z250, KAWASAKI ZX-25R SE KRT EDITION, KAWASAKI ZX-25R SE, KAWASAKI ZX-25R, KAWASAKI Z400, KAWASAKI Z H2, KAWASAKI VERSYS 1000 SE, KAWASAKI Ninja 650, KAWASAKI VERSYS 1000 SE, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA250R, KAWASAKI Z650, KAWASAKI NINJA400, KAWASAKI VERSYS 1000 SE, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 250, KAWASAKI Ninja 250, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 650
It takes some getting used to.
The H2SXSESeries has tape on the inside of the wheel rim, but I wanted to put it on the outside of the wheel rim as well, so I chose the OEM product. I used a special applicator to apply the tape, but it was a little dizzy and unstable at the beginning, so it was difficult to draw a beautiful circle.
The green color is a little bright because it matches the Lime green body, but I think it is not so strange.
View detail
Fits: KAWASAKI Z250, KAWASAKI Z400, KAWASAKI ZX-25R SE KRT EDITION, KAWASAKI ZX-25R SE, KAWASAKI ZX-25R, KAWASAKI NINJA250R, KAWASAKI NINJA400, KAWASAKI Ninja 400 KRT EDITION, KAWASAKI Ninja 250 KRT EDITION, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 650, KAWASAKI Ninja 250, KAWASAKI Ninja 250, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 650, KAWASAKI VERSYS 1000 SE, KAWASAKI VERSYS 1000 SE, KAWASAKI VERSYS 1000 SE, KAWASAKI Z H2
Fashion starts at the feet! I'm tighter.
[How is it used?
I wanted to tighten up the suspension, so I used Rim tape to make a chain.
Cowl also has Silver type Line in it, so I made it Silver to match it.
Was the one you received as per Image?
Even if it is called Silver, it is like White, and Color:Gray and Black are also included, so it is a little plain.
I might have wanted a bit more sparkle and reflection.
Was the installation difficult?
No way straight Tape is 1 pc per Tire1 pc…
I thought it was a Tape that was curved along the Tire in about 4 sections (like MDF's), so I was at a loss.
But it's not hard to put up, just takes patience!
How was your experience with it?
I'm happy to put it up for now.
I'm going to go touring and wash the car to see the durability.
[Included Parts:were they on?
Nothing, just Tape…
[Was there anything that disappointed you?
What's Rim tape like?
But if it's just a Tape, I think they should offer it at a lower price.
Installation method and point and hang
First, we need to make Wheel a Beauty!
Prepare a mist spray and moisten the area to be applied.
And don't be in a hurry, but little by little, press down with your finger and paste it to make a curved shape.
Apply the tape as if you were pulling it, but be careful not to overdo it!
I didn't think I pulled that hard, but it broke in one place.
After applying, peel off the transparent Tape on the surface and you are done.
View detail
Name Chain
I used it for about a year, but it started peeling off, so I removed it.
I think it has lasted a lot longer than it should have for the price.
It is the way to stick it, but clean off the dirt. Next, remove the oil content with WaxOff. After that, I think that it is good if I paste it without haste while using Dryer.
View detail
Design is nice, but …
Quantity:1 Set is all Quantity:It was a 1pc. seat, and it seemed very difficult to do, so we divided it into 16 parts per pc I did
I think this was a Large correct answer
It's easy to work with the Divided and Applied Gauge
The design is perfect, but the overlap is a bit annoying I'm also wondering if each one is expensive
View detail
Gold Wheel to GoldPlating Rim tape
Honda's GoldWheel is a little tasty so add Rim tape as Accent.
Infinite Spec. Think of the colors of RedRim and Others as you would like to add color to Paint in the car image
Purchase a Plating dare to compare GoldWheel and try to buy a little expensive.
Unlike ordinary White and Red like Type, Plating type has a thin Tape.
Since the back is Silver's Tape, the adhesion is also weak. Even if it is degreased and pasted it will be stuck again
I worry a bit about I can do it. Inversely speaking it was easy to paste. Without Guide.
But durability is A little worry. I expect it in the future
But well Major Parenthesis I wonder if I am getting better!
View detail
Fits: KAWASAKI Z250, KAWASAKI ZX-25R SE KRT EDITION, KAWASAKI ZX-25R SE, KAWASAKI ZX-25R, KAWASAKI Z400, KAWASAKI Z H2, KAWASAKI VERSYS 1000 SE, KAWASAKI Ninja 650, KAWASAKI VERSYS 1000 SE, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA250R, KAWASAKI Z650, KAWASAKI NINJA400, KAWASAKI VERSYS 1000 SE, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 250, KAWASAKI Ninja 250, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 650
Accent was attached to a white black Wheel (? ∀ ?)
For ninja 1000 for OEM, Green Light and Silver only!
I turned on red for the same ninja for 17-inches!
Accent of Red on Black wheel!
I think that I can go beyond anything else, 18 MODEL is Standard Equipment ...
The cutting edge is over in half a year d (^_^o)
View detail
Seal is weak
CRFRALLY 50 Pasted on advent
Peeling off during running of 2 rear wheels during running of 8 front and back wheels. It's too bad I'm sorry
View detail
Fits: Others 12Inch wheel car
It is not possible
Although it was attachment to outside 12 Inch wheel, there is no particular problem.
If it considers about 300 yen, it can not be helped..
Kawasaki Color which is actually brighter was really good, but it may not be possible to expect too much for 300 yen.
As attention at the time of installation "Water paste" It is not good. Once I contacted Manufacturer I got a response.
View detail
It is difficult to paste
I pasted it on 17 Inch wheel.
It will be split into three, white will appear, but to Rim etc.. It is difficult to affix it to.
While sticking while aligning, Gap comes out considerably due to the degree of Seal's pulling,
Width of remaining White is equal etc.. It is not turned into.
Is it a technical problem? - - - ?
View detail
Fits: Others 12Inch wheel car
Rim sticker 2nd type
Before, RedRim was changed, because it did not suit you.
Paste is simple but fine adjustment is Large strange.
Wheelone Side is divided by 4.
Seal and Seal cover it (about 0. About 5 mm)
I was able to install it without problems when stuck.
View detail