Reviews
Mirror silver is good for BlackWheel.
SUPER JOG Zr 3 YK is wearing EVOWheel, but EVOWheel is Quantity : Pair (for Left and Right) Because the width that can be pasted with is different, we use 2 types, 4 mm for Right Side and 6 mm for Left Side. Therefore, although it will be quite expensive, the other half is OK as it will not be wasted as a spare. View detail
I decided it focusing on visibility and workability.
[Purchase Point]
Reflective tape and sticking jig are attached.
Stickiness of Tape is not excessive.
It is Large strange after peeling that you are doing Spring.
Because it is not even a lifetime, I used it for several years and it was divided.
【attachment】
1. Wheel degreasing is essential. Parts cleaner is also good, but Recommendation for anhydrous Alcohol.
2. BALI removal of Tape ground plane of jig. Paste will be Smooth.
3. Remove paste adhered to the guide of the jig once it is pasted.
4. In the beginning of the pasting place 1 cm away do not peel off the mount (Once you peel off and paste the backing cute it) It is easy to fix when turning around once.
5. It is better to wipe Tape itself once, if glue sticks to the surface, wipe it. When pasting is necessary Length (One round and half circumference) It is good to unravel to be free.
【Workability】
17in. I put it on.
I glue it with a jig lightly pressed.
Wrinkle was made a little on the inside in the area where the force escaped but it disappeared cleanly as it was pressed.
Just to be sure, Heat gun (Dryer is still OK) I smashed lightly.
【Visibility】
I made it Reflective Tape so it became noticeable.
Please refer to comparison image with FLUSH.
View detail
Fits: Others 17Inch wheel car
I bought it for practice, but I guess this is OK too! (^o^) /
Rim tape for the first time.
In the suddenly expensive Rim tape, there is anxiety when purchase failure is made, so purchase this product.
So, I installed it evenly for practice, but I wonder if the result I pasted is still OK!
Since 8 Tapes are gathered together on the Large mount paper, it is caution for pasting.
View detail
Fits: Others 12Inch wheel car
cheap
At this price this quality is very satisfying.
It is a price that I can think that I should buy it again when it comes off or fade away.
The appearance also changed considerably.
Even if you buy some colors collectively and exchange according to your mood, you may not have a white face.
View detail
I am indebted to you every time..
Every time I change Motorcycle every time I am indebted.
I used to go with FreeHand until now, but I'm afraid that I run out of Spare - - -
This time, I will take care of the dedicated pasted Gauge and Spare is still there. I never peeled so far, so I'm sure this time I think Large is durable.
Working time was around 15 minutes.
View detail
Easy to stick straight type
Although I had purchased KawasakiOEM's straight Rim tape before, I could not stick it well, and Rim tape was using the curve type of Large body quadrant.
However, thanks to the affixing jig attached to this product, it is a straight type, but it was able to stick cleanly without bending.
View detail
Rim stripe6mm
I bought Rim stripe 6 mm and stuck it on a 12 inch foil. In the explanation movie, I kept wearing the foil, but this time it seemed to be stuck, so I pulled out with the foil removed
Of course, I also bought a dedicated Gauge and worked
It was easy to paste when there was a dedicated Gauge
Simultaneous purchase is recommended
View detail
It is good feeling..
I made it for Mirror Bracket exclusive type. It will be a good feeling Accent. Pasting was not a problem at all if there was an exclusive Gauge sold separately, it was rather fun work.
It has been more than half a year since pasting, but gradually peeling off, there is no color deterioration.
Compared to other line tapes, I feel it is higher but I think that COSPA is expensive considering the reliability of pasting and the high Dress-up effect.
View detail
Wheel tape
【What made you decide the purchase?】
What Cost and Rim Guard came with
【How was it actually used?】
Although I thought that it was a bit flashy, I bought a Reflective Type, but I think whether I should think about safety at night.
【Mounting was difficult?】
At first I got used a little, but it was Seal, so I reprinted and I was able to clean up myself..
【Please tell me the installation point and hang】
First, let's do the degreasing firmly.
The edges of the tape are difficult to peel off if you cut off the corners with Scissors.
The part where the circle overlaps determines which side to raise, considering the direction of rotation of the wheel.
Tape is long as 1 pc so do not get tangled, perfect if you can work with 2 people if possible.
[Is there anything I was disappointed about?]
nothing special
【Hope for Manufacturer - Please let me know if you have any improvement points]
I want the Rim Guard to be a little bigger.
【Have you compared items?】
I compare it one by one because it is various from various companies. Especially because there are products that can be pasted with water, I think that it is better to think carefully as Seal type.
View detail
I am satisfied.
Last time I bought MDF this time because I failed with cheap Rim sticker. Simultaneous purchase is recommended as it can be affixed to Beauty when using dedicated Gauge View detail
Fits: Others 17Inch wheel car
It's only cheap
I bought it because it is cheap but the difference in thickness was the largest Large 1 mm place. It is a trash can go.. I purchased another item again. Although it may be unknown if pasted, once I noticed it became worrisome and it could not be helped, so I purchased another item again View detail
Fits: Others 17Inch wheel car
High Cospa
This is enough if Rim sticker has no special feeling.
Even this is a little degreasing and a few drops of water and dishwashing detergent are sprayed and moistened enough and sold separately Gauge (On processing) I think that it will not fail if pasting with using.
It shines well with BlackWheel. I am glad if there are color variations.
View detail
Fits: Others 17Inch wheel car
Paste on Aluminum rims
Feeling that things arrived, it is natural because it is cheap, but cheesy. Subtlely Cut feels dirty.
But, when I pasted it, I did not care much about it.
I feel that there is a slight unevenness in color.
Cospa is good.
View detail
Fits: Others 17Inch wheel car
It is Repeater!
I was glad that it was attached to the VTR-F, so I purchased another 1 set with spare. I am going to paste it to FZ 1. I think that quality is good and Cost performance is the best. View detail
Small Dress-up with a technique
Buy Accent to Wheel. Red and I got lost but because there is no art like YZF-R3 I want to unite with Silver so choose Stainless Steel Silver 6 mm! I am satisfied with my self (Lol) View detail
Fits: Others 17Inch wheel car
It is good quality although it is cheap.
To the extent that the price is suppressed, it is inferior to other Rim stickers, and Red is also a fluorescent color tone so it is Beauty. It is shining in the Black Wheel of VTR-F and I am happy to match the Frame color. View detail
MDF Rim stripe
I thought it was difficult to paste by myself, but it was surprisingly easy to do.
The details of how to paste it on You Tube came out so I tried it exactly and it made it beautiful myself.
The feeling I saw with only this thing is completely different.
I hope I pasted it sooner.
View detail
Installed with Gauge (sold separately) The impression of Can Tan, Motorcycle changes gully!
【What made you decide the purchase?】
At first we planned to purchase an infinite Rim sticker, but the price was twice as much as this product, so he was hesitant.
This product is about 3,700 yen for Motorcycle 1 Set for 1 Vehicle, affordable additions, plenty of Review has been posted, easy to grab the image of the product, and commentary animation of the installation method easy to understand on the product page was posted Also decided.
【How was it actually used?】
As shown in the image, the line just entered Rim, it became impressive Sporty at a stroke, it became cool. Large I'm satisfied..
However, although I bought a 10 mm Stripe this time, it was still not full of Rim width, but it was a different point than I imagined if it was far from far away.
【Was it difficult to install? (Hard parts case)】
Because we used Gauge (sold separately), the installation itself was very easy.
(In the case of * 10 mm Rim stripe, processing of Gauge is necessary.
For more info ↓ ↓ ↓ until Impre of Gauge
http : / / imp. webike. net / commu / article / 0282369 / )
The instruction manual was also very polite, so I was able to work with confidence.
Rather cleaning and degreasing of the prepared Rim took much longer.
【Please tell me the point of installation and hang (in the case of Hard parts)】
- For cleaning around the Rim and degreasing, the Instruction Manual "Car wash and degrease" Although it was written, although washing was troublesome, after cleaning carefully with the Car Wash sheet, we cleaned up with paper Dustcloth impregnated with Parts cleaner.
- If you are working outdoors, please be careful that Small stones and Small Nagomi will not stick to the sticker surface.
If you paste it as it is, it will float up from the bottom of the Sticker.
[Is there anything I was disappointed about?]
This is not Sticker but Gauge's fault, but I wanted to put the Sticker on the outside rather than inside the Rim.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Is it even possible to have a thick Size?
【Have you compared items?】
Infinite Rim sticker
[Others] nothing special.
View detail
Fits: Others 12Inch wheel car
Dress-up
N Tribe's Wheel's Dress-up.
Because it is for 12 to 13 Inch, it is a little Large by 12-inches.
There is no problem if you stick it while bending little by little.
The price is also cheap so you can work casually.
View detail
As ideal! It is not cheap!
Originally it was thought whether to make it 6 mm in width ...
Suddenly found 4 mm width
This one is cheap ...
So, to 4 mm
BlackWheel with Color : Yellow's Rim tape so it's quite conspicuous even at 4 mm
A friend like this kind of Custom saying that it is good to ride without such interest in such things was enough to soak up w
Although I was not interested, it just changed the impression so much!
I was saying w
When sticking the company's Rim stripe gauge
No. quotient ProductNo : GRIM-46M-00-SET
MDF MF : Sticking Gauge for Rim Stripe
We absolutely recommend to use this
Price of 151 yen
It is a lot more work than the price
Depending on the shape of the Wheel there may be interfering parts ...
(If it is CYGNUS, it slightly interferes with five Spoke parts of One Side)
Just by having a Rim tape, just put it along Wheel, you can stick it to Sui ~ ~ ~ っ て っ と っ と Beauty so time will be shortened to the Large width, the appearance will also be a perfect circle of appearance and the price will also be too cheap Come together!
I chose Type containing letters, but this is probably your preference
Just a 4 mm width, there are parts where the character is cut off Limit ...
If it is 4 mm width, no character
With 6 mm width character
This may be a safe option
I will also use cheap Rim tape, but this price is only high as expected
The corner of Seal part is rounded from the beginning and it is hard to peel off
Preliminary Quantity : 1 Set of 2pc. It is also worth having
I think that it would be nice to paste it from the place where I am most comfortable if I first stick it!
1 pc It is so easy that hang can perfectly grasp by the time you paste it!
Impression changes at a stretch so Rim tape is a favorite for Large w
Now Lineup is also increasing in various colors and I think that I will use it if I buy a vehicle in the future
It is durable, but ...
Paste with FZ6
After that, I ran 20,000 km, two and a half running, none of peeling, there was none fade
Even if the cheap one was steadily degreasing it was peeling off with Peron ...
Although it can be cheap if you repack it many times, since I understood that there is a difficulty in durability, I plan to continue using MDF's products in the future!
View detail