Reviews
Fits: Others 10Inch wheel car
This product is inexpensive, and is the one point of the footwear.
I thought it would be difficult to install, but the material is very soft, almost wrinkle-free, no air bubbles, and very easy to apply. View detail
Fits: Others 17Inch wheel car
Silver but White
I bought it while shopping because it was inexpensive.
It is silver, but it looks white depending on how the light hits it.
The adhesive strength of the Sticker itself is weak, so it is better to warm up the Rim when applying it in cold weather.
I put it on in November and even after degreasing and sticking it on, it started to lift off the adhesive surface the next day lol.
With a 17-inch wheel, there is a little extra Sticker.
I think it's fine if you just want to use it as a trial. If you want to paste and dress-up beautifully, please contact us! If you want to
We recommend that you purchase a better Sticker.
View detail
On the Grom JC92.
The Black one-color foil has quite an Impact.
However, Grom JC92 is Matte paint so some of it is peeling off and I have to repurchase.
Price is OK, as low as a joke.
View detail
Fits: Others 17Inch wheel car
Peeling off.
I thought I had degreased it properly, but it came off easily.
I will buy it again and TRY to de-grease it more thoroughly.
View detail
Fits: Others 17Inch wheel car
Worst product
[How is it used?
Introduced to add One pointAccent to Wheel in one color Black.
Was the one you received as per Image?
It was a SilverPlating Film-like Tape.
Was the installation difficult?
When I removed the Wheel from the car body to replace the front and rear tires, I attached the Sticker by the way. After washing the wheel with neutral detergent, I moistened the wheel rim and Sticker with water using a spray mist, and carefully applied the Sticker using Squeegee. I bought a Sticker for a 17-inch wheel, but the curvature of the Sticker did not match the curvature of the Wheel, so I warmed it up with a dryer while adjusting it to the curvature of the Wheel, and managed to attach it. It took me at least an hour to stick one side of the Wheel.
How was your experience with it?
The day after I put it on, it was already peeling off (crying).
Since FilmTape has almost no flexibility, it softens and conforms to the curvature of the Wheel only when heated in a dryer, but it returns to its original shape when cooled, so it will naturally peel off. The adhesive is not that strong. I tried to warm up the peeled part with Dryer and reapply it, but it was peeled off the day after Paris, so I peeled off all of them and threw them away because I was disgusted and felt that further measures were a waste of time!
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Worst product ever!
Other items that would be helpful
Opinions and requests to Manufacturer
It is a scam Manufacturer to sell such an inferior product!
View detail
It was metallic red.
I bought a cheap one from Rim stripe to see what it was like.
Since it was Metallic red, this is an Image of Aluminum Stickers being colored.
Since there is no Instruction Manual, I applied the paste in my own interpretation.
Cut into strips, degrease with Brakes cleaner, and start with the Wheel itself cooled.
There is no sticking, and if it should slip off, it can be quickly reattached.
The overlapping part is about 5mm, and adjusted with caution so that it is not too short. After one week's rotation, warm it up in direct sunlight or in a dryer.
As expected, there was some thick Gap, commensurate with the price. The thickness was also thin, and it would be difficult for the cord to wear if you pull it loosely across, rather than forcing the R to match.
View detail
It's pretty easy to apply.
I replaced it because the one I used to put on was peeling off with age.
I'm not sure if this is a good idea or not, but I think it's a good idea;
It's affordable …
The Rim sticker is a good One point for the price.
View detail
Very easy to install
[How is it used? Installed, used for about a week, no peeling.
Was the one you received as per Image? Yes
Was the installation difficult? I was worried about whether it would stick well, but it was easier than I thought.
How was your experience with it? Very clean, great cost performance
[Included Parts:were they on? None
[Was there anything that disappointed you? None
You can find out how to install it by searching Youtube. If you watch some of them, you'll find that it's large and strong.
View detail
Name Chain
I used it for about a year, but it started peeling off, so I removed it.
I think it has lasted a lot longer than it should have for the price.
It is the way to stick it, but clean off the dirt. Next, remove the oil content with WaxOff. After that, I think that it is good if I paste it without haste while using Dryer.
View detail
Fits: Others 10Inch wheel car
If you put it up right, it's beautiful
I tried to carefully apply the foil after removing the oil from the surface of the foil well, but when I turned the foil But when I put it on the rear foil and made the rotation up, I could not apply it well It didn't seem to bother me that much, so that's good View detail
Fits: Others 17Inch wheel car
Surprisingly good
I used another color on another motorcycle and I liked it a lot, so I got another set I bought for 1 Vehicle
At first I looked at the price and thought I could keep it on for a week, so I bought it while I was at it I thought it would be nice to try out the colors and put on something I liked later As a result, I've kept it for over 4 years The color hasn't faded I've been kind of scared lately because it keeps oddly well LOL!
That said, there are many places where the price is right Of course, they are inevitably different from the OEM colors and the thickness is thin compared to the good ones It's not even close to the Rim width, it's divided into 16 sections and the quantity:There is 1 Set for 1 Vehicle, but the end of the (It's an inconspicuous Level.) It can come off little by little But for some reason it doesn't peel off I wonder if it's going to become a bilon while I'm running? But there is not the slightest sign of that It's strange
By the way, the color itself is not bad If you look closely, you can see that the color is lame or like candy color and it reflects well There is no color variation
And the best part is that it's cheap, so you can play Arrangement easily. for 17-inches I bought a 19/16Inch wheel of KLX125 and installed it As long as you do not see it too close, I think that it is not strange
Anyway, if you want to give a custom feeling easily, I highly recommend it On the other hand, it may not be suitable for people who are very particular about what they do But it's worth the price
View detail
Fits: Others 17Inch wheel car
Even if you put up a random one
Since my motorcycle is all black and my wheels are also black, I have to use Accent I bought it as
I put it on with the feeling that I could just buy it again even if I put it on randomly, but it was surprisingly satisfactory
View detail
Fits: Others 17Inch wheel car
It is a price
Both thickness and R suffered from matching with Rim with RoseRose
Even with one Seal, the width changes rather than the edge and the middle
The color changes according to each Seat of Seal www
It is a price item
View detail
Fits: Others 12Inch wheel car
I am satisfied with COSPA.
It is repurchase. I like it especially because Quality is high for price and Tape is reflection.
However, because 12-inches is perfect, GILERA RUNNER FXR 180 / DD's Rear tire (13Inch) So shortage occurred.
View detail
Fits: Others 17Inch wheel car
Feel good for cheap.
【What made you decide the purchase?】
I purchased it in January of this year and attached it until now, there were no cracks on the surface or fading at all, there was no discoloration and no peeling even when washing with Parts cleaner and so I thought it would be cheap.
【How was it actually used?】
Again, rather than Silver, it looks like WhiteSilver metallic?. As I knew this, I did not have any problem on my own, but it is reasonable that the width of Tape is incomplete.
【Was it difficult to install? (Hard parts case)】
Since Rear has Center Stand, it was easy to work while turning the Tire, but Front turned a Tire floating it, turning it up was a little troublesome by turning.
[Is there anything I was disappointed about?] Required
About 10 months since purchasing last time I thought that the issue of the width of Tape was solved, but it was a little better now.
【Hope for Manufacturer ? Please tell me if there are any improvement points] Required
Although price can be allowed to some extent only for price, we wanted to be able to offer satisfactory products that we sell as a commodity. 1 / Is it only good for the price of 10.
【Have you compared items?】 Required
MDFRim sticker
[Others] Any
View detail
Fits: Others 17Inch wheel car
Satisfied with Cost performance
The width of the Tape is wide and narrow, and making is miscellaneous. In color, I felt close to White rather than Silver, but on the contrary it was good. I want to see durability from now. View detail
Fits: Others 12Inch wheel car
It is super cheap ...
There is nothing cheaper in the Rim sticker
It is super-discount, but it reflects properly in the night at night
Just a little Length is not enough, 2 cm, 3 cm Level, but ...
So it is unnecessary regret! I wonder if there are someone who can perfectly stick it - I wish I had one more extra ...
Because it is not exclusive, is it useless, or how to paste it ...
The thickness (Tape width) There is some misalignment, although it is the difference of the largest Large 1 mm (Eye measurement)
In midwinter pasting work, glue arrival is somewhat bad feeling, perhaps degreasing was bad
After running several times, a little floating in Tape
But at this price I can Dress-up so it will look different as it looks ...
We recommend purchasing 2 pairs because the price is price.
View detail
Fits: Others 12Inch wheel car
I tried rechallenging - - - -
I tried rechallenging - - - - I failed this time also! (Tears)
Sticker R part and Rim R part did not match, checked Inch of Sticker, but it was the same as WheelInch! Also I tried to check the bonding several times but the R part did not suit well and eventually gave up It was. It was the same as last time, but if you forcibly paste R part, impossible R part will float at a later date. I hope it will be done to an unnoticeable level - - - Because I am surprisingly nervous, I immediately gave up this time as well. I think that it will never be Challenge again!
View detail
Fits: Others 12Inch wheel car
Sticking Large change ...
F. I had a chance to remove RWheel, so I tried to enforce it. Just enforcing it was Large strange and I could not stick it quite well (Tears) The amount of gold is also cheap this time Quantity : 2 Set I purchased but failed during enforcement Quantity : We enforced using the second set of eyes. After construction, Styling got better, but ... Because the enforcement was not done well, the inside floated immediately (Tears) Circular Sticker is difficult to enforce. As long as it can be filled with water, I wonder if I can do the positioning properly, I thought after construction ... I did not mind and so I peeled off after 1 week of enforcement. View detail
Fits: Others 12Inch wheel car
It is not possible
Although it was attachment to outside 12 Inch wheel, there is no particular problem.
If it considers about 300 yen, it can not be helped..
Kawasaki Color which is actually brighter was really good, but it may not be possible to expect too much for 300 yen.
As attention at the time of installation "Water paste" It is not good. Once I contacted Manufacturer I got a response.
View detail