Reviews
amateur (Me) It is difficult for ... ... (Crying)
I used it for SEA BASS ADDRESS 110.
I was expecting that it could be attached more beautifully.
I wonder why I am too clumsy ... (Crying)
Guide for pasting Tape (?) I was hoping for Large, but this is difficult as I tried.
Tape itself is a straight line and it is not attached with R, so as you paste it on the Wheel it will be inside the Tape "float" Countless numbers come out.
(I am reflecting that I should have done it more slowly and carefully)
If you run in the rain, water will enter the float, which is likely to cause peeling.
It looks quite nice if you look at it at a distance, but if you come near and you see a myriad of floats on the inside it will get dented.
Well, in the end, you will only be satisfied with yourself (Lol)
View detail
Hang Yes but one point Accent and safety Up
Since the vehicle has changed, it is Repeat.
Installation is surprisingly easy if you use the included Guide
However, I need a little hang.
Wheel is free if it is set to Free.
Although this product, performance does not rise, I will upgrade safety because of One point Accent and Reflection Type.
View detail
I decided it focusing on visibility and workability.
[Purchase Point]
Reflective tape and sticking jig are attached.
Stickiness of Tape is not excessive.
It is Large strange after peeling that you are doing Spring.
Because it is not even a lifetime, I used it for several years and it was divided.
【attachment】
1. Wheel degreasing is essential. Parts cleaner is also good, but Recommendation for anhydrous Alcohol.
2. BALI removal of Tape ground plane of jig. Paste will be Smooth.
3. Remove paste adhered to the guide of the jig once it is pasted.
4. In the beginning of the pasting place 1 cm away do not peel off the mount (Once you peel off and paste the backing cute it) It is easy to fix when turning around once.
5. It is better to wipe Tape itself once, if glue sticks to the surface, wipe it. When pasting is necessary Length (One round and half circumference) It is good to unravel to be free.
【Workability】
17in. I put it on.
I glue it with a jig lightly pressed.
Wrinkle was made a little on the inside in the area where the force escaped but it disappeared cleanly as it was pressed.
Just to be sure, Heat gun (Dryer is still OK) I smashed lightly.
【Visibility】
I made it Reflective Tape so it became noticeable.
Please refer to comparison image with FLUSH.
View detail
Easy to stick straight type
Although I had purchased KawasakiOEM's straight Rim tape before, I could not stick it well, and Rim tape was using the curve type of Large body quadrant.
However, thanks to the affixing jig attached to this product, it is a straight type, but it was able to stick cleanly without bending.
View detail
Wheel tape
【What made you decide the purchase?】
What Cost and Rim Guard came with
【How was it actually used?】
Although I thought that it was a bit flashy, I bought a Reflective Type, but I think whether I should think about safety at night.
【Mounting was difficult?】
At first I got used a little, but it was Seal, so I reprinted and I was able to clean up myself..
【Please tell me the installation point and hang】
First, let's do the degreasing firmly.
The edges of the tape are difficult to peel off if you cut off the corners with Scissors.
The part where the circle overlaps determines which side to raise, considering the direction of rotation of the wheel.
Tape is long as 1 pc so do not get tangled, perfect if you can work with 2 people if possible.
[Is there anything I was disappointed about?]
nothing special
【Hope for Manufacturer - Please let me know if you have any improvement points]
I want the Rim Guard to be a little bigger.
【Have you compared items?】
I compare it one by one because it is various from various companies. Especially because there are products that can be pasted with water, I think that it is better to think carefully as Seal type.
View detail
Since other Motorcycles are equipped with the Wheel tape, it is made to make it the purchased Motorcycle.Since neither decoloring nor the peeling can see a function on other Motorcycles which left for three years, it is satisfactory.However, I think wheth
Since other Motorcycles are equipped with the Wheel tape, it is made to make it the purchased Motorcycle.Since neither decoloring nor the peeling can see a function on other Motorcycles which left for three years, it is satisfactory.However, I think whether since a Tape may go out if it tries to stick at cold time, recommendation sticks at warm time.
If it can do with it, I will want you to make the kind of color more.
View detail
Although stuck on NC700X, the die length of the Tape was a Limit.Since it is easy to go out on a soft Tape to except, cautions are required.It is as serious as being involved.Moreover, if the direction (Tire direction of rotation) to stick is different, i
Although stuck on NC700X, the die length of the Tape was a Limit.Since it is easy to go out on a soft Tape to except, cautions are required.It is as serious as being involved.Moreover, if the direction (Tire direction of rotation) to stick is different, it will fail.Since there was no concrete explanation of a way to stick, it was serious.If it presses down and sticks, moving little by little, it will be finished finely.
It stuck and was necessity about 45 minutes from the start to termination.Let's stick a hole after degreasing.It is a Tape of a one-shot deal.
View detail
It purchases to a Dress-up [ up ] underfoot. Since it was awkward, the exclusive attachment Gauge was purchased separately and it challenged. However, it bent in any way, and it stuck well and was not able to do. Moreover, another color is purchas
It purchases to a Dress-up [ up ] underfoot.
Since it was awkward, the exclusive attachment Gauge was purchased separately and it challenged.
However, it bent in any way, and it stuck well and was not able to do.
Moreover, another color is purchased and it challenges. --
View detail
It used for attachment of 6 mm of Decoration Tapes width on hand. If there is this [ no ] although [ like the little Ideas goods instead of a special thing ], a straight Tape cannot be stuck on a rim.But when getting used and coming to be able to do w
It used for attachment of 6 mm of Decoration Tapes width on hand.
If there is this [ no ] although [ like the little Ideas goods instead of a special thing ], a straight Tape cannot be stuck on a rim.But when getting used and coming to be able to do well, it will stick and, finally will become.
View detail
I referred to the impression of others, I thought the start and the end of stick. A position with an amusing angle which beginning sticks after sticking a part will be cut about 2 cm. It sticks 1 round then, sticks on an excess about 3 cm, and cuts roughl
I referred to the impression of others, I thought the start and the end of stick. A position with an amusing angle which beginning sticks after sticking a part will be cut about 2 cm. It sticks 1 round then, sticks on an excess about 3 cm, and cuts roughly. The overlapping position is lessened as much as possible, and it cut for adjustment. It was third or forth time to do well. Two front tires had remained patch, but it is ok not seen from near! The appearance is good! If I don't like, it is ok to re-stick and it was easy than I thought. View detail
It gave up, although challenged once. R cannot be drawn well. a wrinkle should enter or twist -- it was sufficient and carried out. If it carries out by putting in concentration, it may be able to stick finely. The fellows currently sold a
It gave up, although challenged once.
R cannot be drawn well.
a wrinkle should enter or twist -- it was sufficient and carried out.
If it carries out by putting in concentration, it may be able to stick finely.
The fellows currently sold at R form for every inch may be trustworthy.
a challenge -- that.
View detail
I think that it will be hard to stretch if a car body is not floated. But since there was no stand, I worked by two persons. Even if it used the guide at first, it was not able to do very much well, but it is OK if it gets used. However, they
I think that it will be hard to stretch if a car body is not floated.
But since there was no stand, I worked by two persons.
Even if it used the guide at first, it was not able to do very much well, but it is OK if it gets used.
However, they are [ pull / too much / a tape ] cautions.
It is awkward if extended.
But considering a price, it is satisfactory.
View detail
A wheel paint is a recommend in the direction ..., slightly in cost. The impression of a motorcycle changes. Although it is also in other Ho's impression, it is difficult to stick. I think that it can stick comparatively well if it sticks divi
A wheel paint is a recommend in the direction ..., slightly in cost.
The impression of a motorcycle changes.
Although it is also in other Ho's impression, it is difficult to stick.
I think that it can stick comparatively well if it sticks dividing into several times.
In addition, since it may become less insufficient if it fails since it is a quantity like 4 rounds in 18 inch wheels, cautions are required.
View detail
Usage was not found well but stuck after all the components which guide an attached tape by its intuition. Since it is extended well, along with the rim of a tire, it can stick round. After sticking, it ran several times, but without separating es
Usage was not found well but stuck after all the components which guide an attached tape by its intuition.
Since it is extended well, along with the rim of a tire, it can stick round.
After sticking, it ran several times, but without separating especially, he had a feeling which also changed the impression of the motorcycle and it became a cheap and simple and convenient dress-up up.
View detail
Since it is with an attachment auxiliary implement, it is recommended positively. I do not think that it can stick directly without an auxiliary implement. but if it lets up, it will fail -- since it is attached very well (>_
Since it is with an attachment auxiliary implement, it is recommended positively.
I do not think that it can stick directly without an auxiliary implement.
but if it lets up, it will fail -- since it is attached very well (>_
View detail