Reviews
Satisfied with just the right size and cool typeface.
I purchased this as a number plate for off-road racing.
There are three cards with the same number.
Compared to the Off-roadNumber Plate of other manufacturers, it is a thin material, so when it arrives, it is very thin and not as thin as the Off-roadNumber Plate of other manufacturers. 'Won't it peel right off if it's this thin?' I had no problem washing the car while it was running and afterwards.
I have not tried the high-pressure car wash yet, but I think it is Large sturdy if you are conscious of not exposing it directly to water.
I trust it because it is a Number Plate handled by BONSAI, which is an expert on Race (laughs).
Size selected is approximately 85mm in height.
I put it on my Husqvarna 2016 TE250 and it was just the right Size.
I felt that the typeface was distinctive, but a friend of mine who was watching the Race That Number Plate was easy to read. so it seems to be highly visible from a distance.
View detail
3pcs in 1set, before quantity:Pair (for Left and Right) Cost-effective and can be affixed to
[How is it used?
Dress-up of my car?
Was the one you received as per Image?
I think it is as per Image.
How was your experience with it?
Some places to paste the Number Plate may be curved, so it is better to paste the Number Plate on a flat surface if possible,
[Points to note]
The area where the Number Plate is to be applied should be degreased and wiped clean.
How was your experience with it? As mentioned in the previous section, it is better to use a heat gun to warm up the paste before slowly applying it to places where the paste surface is not flat or curved.
How did it compare to other products?
The price is low and there are 3 pieces in 1 SET, so Upper Cowl and Quantity on the front:Pair (for Left and Right) It is good because it can be attached to the Cowl of
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
It is recommended to degrease and wipe the area to be used for affixing the Number Plate beautifully in advance.
If the surface is not flat or curved, it is better to warm it up with a heat gun before applying the paste slowly.
View detail
Durable even off-road!
I bought and pasted it for competing in an off-road race.
Although the area of the Number Plate was small for Endu-LANCER, the exquisite large size of the Number Plate, with good visibility and a size that does not cause trouble where it is attached, convinced me that the Number Plate was produced by a shop that knows the field.
The Number Plate fell down many times during the race, and although there were some scratches and scuffs on the Number Plate, it did not peel off until the end.
I would like to purchase this product again before the next Race, so please make sure you have all the numbers in stock.
View detail
Ideal for off-road vehicles
Even the recent Side cover of Smallest Motorcycle has this Quantity:Set is a good place to put it. I buy them because I race a few times a year and it's a hassle to cut them out. View detail
Race Specification (appearance oriented) If you want to...
[How is it used?
Used for Cowl's Dress-up.
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy
How was your experience with it?
The texture is solid and does not seem to be peeling off, etc., as it can be used in actual races.
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
None!
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
for Race.
[How is it used?
I bought this for the Enduro race.
I usually have someone with a CuttingMachine cut it for me, but I realized at the last minute that the number was different than usual and panicked and chose this product. I'm glad it was in stock! Thank you WehBig.
Was the one you received as per Image?
As per Image
Was the installation difficult?
Just stick it on.
Because it was 2 digits this time, it was easy. Sometimes, if it is a popular course in the FUNClass of JNCC (such as the old Mt. Yaga), because there is a case of 4-digit Number Plate, it is better to match the place once if it is possible to paste.
How was your experience with it?
I am satisfied with the easy-to-read Number Plate.
Some people often make a dirty Number Plate with Vinyl Tape or Gum Tape, but since it's hard for the Race tallying Staff to check, I want them to be cursed with not being able to get around because of Stack or MachineTrouble happening. It's really annoying. Don't compete in Level.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
It's always nice to have a good inventory.
View detail
Best size for Off-road motorcycle
[How is it used?
Purchased to compete in the Enduro race on a HUSQVARNA TE250.
I always buy it because it's too much trouble to Cut it every time every time.
Before, Quantity because it contains 3 sheets when you buy one:Pair (for Left and Right) Minutes, no problem.
How was your experience with it?
There are other products, but this size is very convenient for sticking on the Small Space of Off car.
I think the durability is also there because it doesn't come off even if I wash it several times with a high-pressure washer.
[Points to note]
If I do it while warming it up with Heat gun etc., I know that I can put it on beautifully, but I put it on properly every time, but because Size is Small, I can put it on properly in that way.
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
Cheap and selectable numbers
I love that I can choose my favorite number and there are three in the package.
It might be useful for the person who does StickerTune.
I made myself 1 and 2.
View detail
If you think about the hassle, it's more economical to buy.
Purchased for the Enduro race as it is mandatory to install the Entry and designated Number Plate.
I thought about making it myself using a cutting sheet, but I thought it would be better to buy it considering the time etc. I chose this product which is also reasonably priced.
The size was Large and Small, but both were in line with the Race regulation, so I chose the Small one.
I was able to get over the race without any problem if I polish it with degreaser before sticking.
I think it's durable to some extent if you don't use it wrong.
View detail
If you think about the hassle, it's more economical to buy.
Purchased for the Enduro race as it is mandatory to install the Entry and designated Number Plate.
I thought about making it myself using a cutting sheet, but I thought it would be better to buy it considering the time etc. I chose this product which is also reasonably priced.
The size was Large and Small, but both were in line with the Race regulation, so I chose the Small one.
I was able to get over the race without any problem if I polish it with degreaser before sticking.
I think it's durable to some extent if you don't use it wrong.
View detail
If you think about the hassle, it's more economical to buy.
Purchased for the Enduro race as it is mandatory to install the Entry and designated Number Plate.
I thought about making it myself using a cutting sheet, but I thought it would be better to buy it considering the time etc. I chose this product which is also reasonably priced.
The size was Large and Small, but both were in line with the Race regulation, so I chose the Small one.
I was able to get over the race without any problem if I polish it with degreaser before sticking.
I think it's durable to some extent if you don't use it wrong.
View detail
Good thing it's a little thicker and sturdier.
I'm worried that the Sticker Seat for home use is too thin and is going to come off.
This one is a little thicker than the regular one and has a better adhesive.
I also like that the typeface is a little bit cooler. (Lol)
View detail
Good thing it's a little thicker and sturdier.
I'm worried that the Sticker Seat for home use is too thin and is going to come off.
This one is a little thicker than the regular one and has a better adhesive.
I also like that the typeface is a little bit cooler. (Lol)
View detail
Good thing it's a little thicker and sturdier.
I'm worried that the Sticker Seat for home use is too thin and is going to come off.
This one is a little thicker than the regular one and has a better adhesive.
I also like that the typeface is a little bit cooler. (Lol)
View detail
Good thing it's a little thicker and sturdier.
I'm worried that the Sticker Seat for home use is too thin and is going to come off.
This one is a little thicker than the regular one and has a better adhesive.
I also like that the typeface is a little bit cooler. (Lol)
View detail
For Grass Race's One Day!
Because the price is also cheap, I use it as Grass Race's One Day Number Plate.
Strength and adhesion are normal, I feel like I will not last long.
People who are worried about peeling are likely to protect with Re Re seat.
View detail
Moderate Large Tight, Shuffled Number Plate !!
For WEX participation, this time we installed FACTORY EFFEX FACTORY FX FACTORY Numbers Number Plate Number.
Last time I was wearing KITACO's Number Plate, but unlike KITACO, FACTORY EFFEX is thin as letters and cool as shit!
It is Stylish by appearance, I felt that I can deal with even if the Space to be stretched because of its slenderness is limited.
View detail
Ideal for off-road race of yearly Entry!
It is a Number sticker purchased for participating in Enduro race.
Since I did not have any problem even if I used it for a year past last year, I bought it again this year.
Because it is expensive, I think that it is inconvenient in Race where Number Plate Number will change every time you participate.
Recommendation for those who want to past Race of Entry of the year or favorite number for a long time.
● A good place
- It is difficult to express, but it is thicker than ordinary Cutting sheet and it is impression like thin Rubber sheet?.
- Because it has thickness, it's strong.. I have never been hurt. Or, scratches are not noticeable at all.
- It has strong adhesion and never peels off while running.
- It will withstand washing with high pressure washer (Although I never watered it at an angle that would deliberately peel off).
- When one year passed and peeled off, almost no sticky matter remained. Although there are some places left, it fell cleanly with Parts cleaner.
● This is not good
The only bad thing is that I think there are individual differences, but there may be cases where adhesive sticky sticks out.
Probably, I think that it is a problem when Cutting Seat at the factory. Please do more Exactly (Lol)
I do not mind at all, but after wearing a sticky person, I wonder if you can wipe off only the part where the bedbett is coming out.
View detail
I bought MOTION Standard Numbers MX2. It was because I needed printed numbers to participate in an amateur race with my SUZUKI RA125.The size of its font and its thickness stands out.It was also easy to paste. I think it can be rec
I bought MOTION Standard Numbers MX2.
It was because I needed printed numbers to participate in an amateur race with my SUZUKI RA125.
The size of its font and its thickness stands out.
It was also easy to paste.
I think it can be recommended, for it has good price!
View detail