Reviews
for RaceNumber Plate
[How is it used?
I purchased this as a SIDE and UnderNumber PlateSticker for Road race.
How was your experience with it?
I usually use a Number Plate Sticker from KITACO, but Webike discontinued it, so I looked for something close and bought it. 9 was the Number Plate, but Sticker 6 was in stock, so I used 6 upside down.
How did it compare to other products?
I think the numbers are longer and narrower than the Sticker I used to use, perhaps for Off purposes? I think the numbers are longer and narrower.
Also, the thickness of Sticker seems a bit thick.
[Points to note]
When I put it on the part with R, air gets in and it is hard to put it on well, so I use heat gun and struggle more than usual Sticker.
Especially, when I want to sticker to Seat Cowl, my Motorcycle needs to cut the sticker,
I had a hard time putting it on well. (Even after it was pasted, the workmanship was not good.)
View detail
The usual Number PlateSticker was discontinued.
[How is it used?
I purchased this as a Front License PlateSticker for Road race.
How was your experience with it?
I usually use a Number Plate Sticker from KITACO or similar, but Webike had discontinued it, so I looked for something close and bought it.
How did it compare to other products?
I think the numbers are longer and narrower than the Sticker I used to use, perhaps for Off purposes? I think the numbers are longer and narrower.
Also, the thickness of Sticker seems a bit thick.
[Points to note]
When I put it on the part with R, air gets in and it is hard to put it on well, so I use heat gun and struggle more than usual Sticker.
View detail
Design and Size are good
Design and Size are just right, but not so durable. View detail
Buy for Race
I'm going to participate in HappyEnduro, an off-road Enduro race!
So, we needed Number Plate and purchased this product.
It contains 3 pieces per set, Front mask and Quantity:Pair (for Left and Right) The number seal could be pasted with the number seal of the
I have a CuttingMachine at home, but to be honest, it's a hassle, so I'm very grateful to be able to buy it this way.
View detail
for people who don't want to make their own work
I used this at a track meet that required a Number Plate display.
I just flicked it on and off, but it didn't wrinkle and I was able to put it on. There is no problem even on a curved surface.
It's not cosy, but it's easy and good.
The number of sheets is 2 per 1pc. so be careful when buying!
View detail
This is a normal Number PlateSticker.
I used this at a track meet that required a Number Plate display.
I just flicked it on and off, but it didn't wrinkle and I was able to put it on. There is no problem even on a curved surface.
Also, I used White, but with Cutting sheetMaterial, there was no color smear and the color was beautiful.
But the price is a little high. If you need to cut, paste, or use it many times, it is better to learn how to make your own Kill.
View detail
Necessary for the Race
It's a must-have for Road race, Enduro, Motocross and Race.
If you have a cutting sheet and a cutting machine, you can make this product.
Material is firm and stretchy and doesn't leave a sticky residue.
View detail
To spare the Racer.
I bought it as a spare for the Racer Number Plate. It's safe to keep one set in your toolbox because it's easy to peel off the number plate when you fall off. View detail
On the RaceNumber Plate
I bought it because I need a number plate for my race car. Multiple plates are included. View detail
For the tail cowl.
I used it on the tail of WR250X Racer. I was saved by the small size of the lineup because of the unexpectedly narrow tail cowl.
I have multiple copies in the box and I'll keep them as a spare.
View detail
Under Cowl.
Used on Racer's WR250X Under Cowl. It's a good product to have, but it's very expensive when you buy it.
The thing itself is an ordinary cut number.
View detail
Conforms to MFJ regulations
I bought a #5 sticker to use in the race.
This product conforms to MFJ regulations and can be used with confidence.
And Sticker has good elasticity, so you can put it on the curved part without any problem.
I was able to use Dryer to apply it even more beautifully.
I stocked a few of them because they are easier than cutting letters.
View detail
MFJ compliance
We use it in the race and it conforms to MFJ regulations, so you can use it with confidence.
And Sticker has good elasticity, so you can put it on the curved part without any problem.
I was able to use Dryer to apply it even more beautifully.
I buy it every time because it's easier than making my own cutouts.
View detail
Good visibility.
I'm thankful that the size fits the race regulations
Font is rather thick? I think it is So I think it has good visibility
The content number was 3 cards in the package I am a single-digit Number PlateNumber, so I have a Quantity:1 Set of 4pcs. 2 pieces of Front-Rear ×2 for production, if included Spare for Cowl and 2 times use, so quantity from 3 pieces:I personally would have appreciated it if it came in 1 Set of 4pcs
View detail
And Quantity:If you have 1pc
I'm thankful that the size fits the race regulations
Font is rather thick? I think it is So I think it has good visibility
The content number was 3 cards in the package I am a single-digit Number PlateNumber, so I have a Quantity:1 Set of 4pcs. 2 pieces of Front-Rear ×2 for production, if included Spare for Cowl and 2 times use, so quantity from 3 pieces:I personally would have appreciated it if it came in 1 Set of 4pcs
View detail
Large Ki Number PlateSticker
Purchase to enter Race
Regarding the part of the curve as it is also in the product image, it is quite rounded, so I think that it is a Design I do not like so much as I like angular characters.
Since the Size differs according to the position to be attached with Regulation, Let's make sure that the Large is satisfied.
View detail
KITACONumber seal
Quantity : 1 Set of 3pcs. However, Size differs according to Regulation in Front and SIDE.
It seems to be made by oneself, but it is easy because you do not have to worry about the size of Regulation.
View detail
for FrontNumber seal
Purchased for Number Plate for Race.
"7" Also "9" It is made of the same KITACO, but I feel that Balance of Length is somewhat bad.
"9" Is it because the bottom of it is short?
View detail