Reviews
3pcs in 1set, before quantity:Pair (for Left and Right) Cost-effective and can be affixed to
[How is it used?
Dress-up of my car?
Was the one you received as per Image?
I think it is as per Image.
How was your experience with it?
Some places to paste the Number Plate may be curved, so it is better to paste the Number Plate on a flat surface if possible,
[Points to note]
The area where the Number Plate is to be applied should be degreased and wiped clean.
How was your experience with it? As mentioned in the previous section, it is better to use a heat gun to warm up the paste before slowly applying it to places where the paste surface is not flat or curved.
How did it compare to other products?
The price is low and there are 3 pieces in 1 SET, so Upper Cowl and Quantity on the front:Pair (for Left and Right) It is good because it can be attached to the Cowl of
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
It is recommended to degrease and wipe the area to be used for affixing the Number Plate beautifully in advance.
If the surface is not flat or curved, it is better to warm it up with a heat gun before applying the paste slowly.
View detail
for RaceNumber Plate
[How is it used?
I purchased this as a SIDE and UnderNumber PlateSticker for Road race.
How was your experience with it?
I usually use a Number Plate Sticker from KITACO, but Webike discontinued it, so I looked for something close and bought it. 9 was the Number Plate, but Sticker 6 was in stock, so I used 6 upside down.
How did it compare to other products?
I think the numbers are longer and narrower than the Sticker I used to use, perhaps for Off purposes? I think the numbers are longer and narrower.
Also, the thickness of Sticker seems a bit thick.
[Points to note]
When I put it on the part with R, air gets in and it is hard to put it on well, so I use heat gun and struggle more than usual Sticker.
Especially, when I want to sticker to Seat Cowl, my Motorcycle needs to cut the sticker,
I had a hard time putting it on well. (Even after it was pasted, the workmanship was not good.)
View detail
The usual Number PlateSticker was discontinued.
[How is it used?
I purchased this as a Front License PlateSticker for Road race.
How was your experience with it?
I usually use a Number Plate Sticker from KITACO or similar, but Webike had discontinued it, so I looked for something close and bought it.
How did it compare to other products?
I think the numbers are longer and narrower than the Sticker I used to use, perhaps for Off purposes? I think the numbers are longer and narrower.
Also, the thickness of Sticker seems a bit thick.
[Points to note]
When I put it on the part with R, air gets in and it is hard to put it on well, so I use heat gun and struggle more than usual Sticker.
View detail
Buy for Race
I'm going to participate in HappyEnduro, an off-road Enduro race!
So, we needed Number Plate and purchased this product.
It contains 3 pieces per set, Front mask and Quantity:Pair (for Left and Right) The number seal could be pasted with the number seal of the
I have a CuttingMachine at home, but to be honest, it's a hassle, so I'm very grateful to be able to buy it this way.
View detail
Nice webshop
I like OEM parts. Everything was delievered as aspected. Shiping as aspected. I will return when they have been assembled View detail
for Race.
[How is it used?
I bought this for the Enduro race.
I usually have someone with a CuttingMachine cut it for me, but I realized at the last minute that the number was different than usual and panicked and chose this product. I'm glad it was in stock! Thank you WehBig.
Was the one you received as per Image?
As per Image
Was the installation difficult?
Just stick it on.
Because it was 2 digits this time, it was easy. Sometimes, if it is a popular course in the FUNClass of JNCC (such as the old Mt. Yaga), because there is a case of 4-digit Number Plate, it is better to match the place once if it is possible to paste.
How was your experience with it?
I am satisfied with the easy-to-read Number Plate.
Some people often make a dirty Number Plate with Vinyl Tape or Gum Tape, but since it's hard for the Race tallying Staff to check, I want them to be cursed with not being able to get around because of Stack or MachineTrouble happening. It's really annoying. Don't compete in Level.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
It's always nice to have a good inventory.
View detail
I can use it normally
You can put it on your motorcycle or Helmet when you have an Enduro or RALLY50 I'm using it 。 You need to be careful not to cut the inner part of the corner when you remove it from the backing board because it is easily cut There is I think it could be a little cheaper, but I guess the packaging materials etc. are expensive View detail
For Grass Race's One Day!
Because the price is also cheap, I use it as Grass Race's One Day Number Plate.
Strength and adhesion are normal, I feel like I will not last long.
People who are worried about peeling are likely to protect with Re Re seat.
View detail
Lack of durability as for Off-Road
Used to participate in Enduro race.
It's cheaper than other companies' products, so you can purchase it easily, but Seat's thickness is not so durable.
Even with a slight fall, it was scraped immediately.
Also I was weak in glue, I was hit by car wash after Muddy condition and soon flew away and flew away. Of course the pasting is degreased and pasted as usual - - -
Merit will be the cheapest price in On road race and in different Race of Number each time you participate in Off-road, but if you are competing in the Series fight of Fixed Number throughout the year it is said that durability is insufficient felt.
You should purchase a thick for Off-RoadDecal.
View detail
I bought MOTION Standard Numbers MX2. It was because I needed printed numbers to participate in an amateur race with my SUZUKI RA125.The size of its font and its thickness stands out.It was also easy to paste. I think it can be rec
I bought MOTION Standard Numbers MX2.
It was because I needed printed numbers to participate in an amateur race with my SUZUKI RA125.
The size of its font and its thickness stands out.
It was also easy to paste.
I think it can be recommended, for it has good price!
View detail